Question about Nissan Pulsar
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If you engine is a 2.4 liter it's on the passenger side center of the engine compartment, the hoses from the fuel filter conncts to the throttle assembly . You may have to remove the air filter housing to see it. It is a round canister hoses held on with fuel line clamps. hope this helps
Posted on Apr 06, 2009
I have same/similar problem.... if this problem happens off and on... runs well one day and next day is jerky-stalling then it's more than likely your airflow meter
Posted on Feb 26, 2010
SOURCE: head gasket torque 1997 nissan
not sure what ur asking but if ur looking to change a head gasket make sure ur day is free cause its a long job and a lot of work if u do not know what ur doing take it to a mechanic u will wish u did if u try it ur self all jokes aside. its more then a 3 hour job
Posted on May 11, 2011
The cam and crank position sensor can be found in the front of the crank on the
engine block below or next to the water pump in many applications.
It can also be located on the main crank pully or the flywheel.
Posted on Feb 09, 2012
Tips for a great answer:
Feb 08, 2018 | Nissan Cars & Trucks
Nov 18, 2017 | Nissan Cars & Trucks
Jul 30, 2017 | Nissan Cars & Trucks
Oct 03, 2016 | Nissan Pulsar Cars & Trucks
Mar 11, 2015 | Nissan Pulsar Cars & Trucks
Nov 17, 2012 | Cars & Trucks
Feb 09, 2012 | Nissan Pulsar Cars & Trucks
Feb 16, 2010 | 1983 Nissan Pulsar
114 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: