Question about 1992 Nissan King Cab

Open Question

Remove door panel 1992 nissan king cab truck

Need to remove door panel on 1992 Nissan king cab truck so I can fix door lock on both sides. Can not use my key to unlock either door, how do I fix that too?

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cartersintn
  • 62 Answers

SOURCE: 1992 nissan king cab pickup

take a strong piece of round metal a metal hanger might work straighten it out about six inches up bend to L shape then about 2 inches going from bend to shorter end bend straight up to be paraell to hanger now you should have it long on one side the other side should have a short end with about 4inches sticking up wedge about 3inches infront of door lock button and weather stripping a flat head screwdriver will work lower short side of tool into door cavity below lock button turn until you feel the lock you will see it move and pull up

Posted on Sep 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1985 nissan king cab rear window removal


If you have a rubber gasket holding the glass in gently lever the rubber over the metal surround. If it is a later model the glass will be glued in and it is a real hassle to remove.

May 26, 2013 | Cars & Trucks

1 Answer

Trying to figure out the dimesions of my front door and back seat speakers in my 97 nissan king cab pickup


According to my listing and it doesn't say anything different about a regular or king cab but what is says is for the front speakers: 4" x 6" doors, rear speakers: 6 1/2" side panels. I hope this was the information you needed and that it helped. Good luck.

Apr 22, 2011 | 1997 Nissan Pickup

1 Answer

Where is the thing to bleed the clutch on a 1992 nissan king cab?


its by the transmision under the truck. its mounted to the side of trasns. follow the hose and you will come to this funny looking thing with a small bleeder screw.

Dec 17, 2010 | 1992 Nissan King Cab

1 Answer

How to remove tail light on 92 nissan truck? truck has liner, ...i dont see any exterior screws.


access to screws is behind the light. access screws through two holes located behind light in the bed of the truck. use 6-inch socket extension and 13-mm socket. loosen screws and light comes out.

Sep 08, 2009 | 1992 Nissan King Cab

1 Answer

1993 nissan 300zx door panel removal to fix lock


Its tricky but you need to pop the half circle off to get to the 14mm bolt. Then roll the window down and there is a plastic circle at the top of the door frame. Pop that off and remove the one plillips screw and pop the panel off to get to the remaining 2 10mm bolts holding the door panel on.

Apr 05, 2009 | 1992 Nissan 300ZX

1 Answer

No instrument panel lights on 1995 Nissan King Cab


Ye, the dimmer switch still works.

I know this because, when I turn on the left direction flasher, the panel lights pulse dimly on and off with the direction light flasher.

Do I have a defective direction light flasher? if so where is it located?

Nov 24, 2008 | 1995 Nissan King Cab

2 Answers

Removal of stereo


there are 2 screws down at climate controls remove them and whole panel pops off, stereo is held in with 4 screws facing you. but it looks bad with a generic stereo fitted nissan have a cd changer that fits in above the stereo where the cup holder is and hooks up to stereo and looks good, not overly flashy,
good luck


Aug 26, 2008 | 2005 Nissan King Cab

1 Answer

1992 nissan king cab pickup


take a strong piece of round metal a metal hanger might work straighten it out about six inches up bend to L shape then about 2 inches going from bend to shorter end bend straight up to be paraell to hanger now you should have it long on one side the other side should have a short end with about 4inches sticking up wedge about 3inches infront of door lock button and weather stripping a flat head screwdriver will work lower short side of tool into door cavity below lock button turn until you feel the lock you will see it move and pull up

Aug 16, 2008 | 1992 Nissan Pickup

2 Answers

Temperature and gas gauge not move


I would start by checking connections behind cluster and check all fuses

Jun 07, 2008 | 1992 Nissan King Cab

Not finding what you are looking for?
1992 Nissan King Cab Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...