Question about 2000 Toyota Sienna
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Being 2002, its probably has original feon in the systems, you sysytem may be low and needing recharging, recharge the sysytems will tell you exactly what your problems is. If your compressor is not kicking on, mean you either low on feon Or the presure swicth may be faulty, if not than it would be your compressure, ect....., have it rechage first before anything, that may solve your problems..if the system is low on feon the systems will not run period.
Posted on Aug 13, 2009
The drain plug is on the bottom of the transmission. Its torqued to 49 nM.
1. Remove tranny oil pan drain plug
2. Drain old fluid (roughly 2-4 quarts)
3. Reinstall drain plug.
4. Measure amount drained in a 99 cent orange juice pitcher from Walmart
5. Pour back the same amount drained using Toyota Type T-IV fluid (available in 1 quart bottles from a Toyota dealer.
6. Start engine and shift slowly through all the gears ending in Park.
7. Check fluid level on the dipstick. Add fluid, if necessary, to bring the level to a point inbetween the COLD and HOT marks on the dipstick.
8. Go for a 20 minute drive and recheck fluid level. Add fluid, if necessary, to bring the level up to,
but not beyond, the upper half of the HOT range on the dipstick.
As in 1973, NO FLUSHING is needed and NO FILTER REPLACEMENT is needed, NO PAN REMOVAL is needed. As, as in 1973 todays Toyotas have a metal mesh filter screen that doesn't ever get clogged except in rare cases of transmission operational abuse, including failure to ever change the fluid for 150,000 miles or more.
Posted on Nov 21, 2009
If you have the HID bulbs, and there is moisture in the bottom of the assembly, the high voltage box at the bottom will not work. this requires removing the whole headlamp, removing the circuit board from the bottom and drying out. I have done mine twice before finally finding how water was getting in at the top seam of the lamp assembly. You will have to dis-assemble part of the wheel well and bumper cover to gain access to all the mounting bolts. Best of luck
Posted on May 02, 2010
Tips for a great answer:
Nov 26, 2015 | 2004 Toyota Sienna
Oct 15, 2015 | 2004 Toyota Sienna
Dec 08, 2010 | 2000 Toyota Sienna
Nov 13, 2010 | 2006 Toyota Sienna
Dec 14, 2009 | 2002 Toyota Sienna
Sep 29, 2009 | 1999 Toyota Sienna
Apr 14, 2017 | 2001 Toyota Sienna
Jan 16, 2016 | 2000 Toyota Sienna
103 people viewed this question
Usually answered in minutes!