Question about Cars & Trucks

1 Answer

PURCHASED A NEW FAN CLUTCH FROM GMC NOW GET CODE P1481 ON MY 2003 GMC ENVOY SLTTHE CODE COMES AND GOS WHAT SHOULD I DO?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,431 Answers

P1481 definition is coolant fan speed,The wire on this sensor tends to chaff through the plastic it is routed through,this is very common, the fix is to replace thhe harness remove the harness from the plastic guide,and repair for opens, or chaff,

Posted on Dec 09, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: engine cooling fan runs all of the time

the fan relay is bad

Posted on Mar 06, 2009

GM MAN
  • 9 Answers

SOURCE: Envoy a/c fan switch problem

the fan motor needs a new relay its a harness under the dash pretty simple to replace

Posted on Jul 03, 2009

c17hydro
  • 2984 Answers

SOURCE: GMC Envoy w/ code P0128

Start at $89 right off the bat just for diagnostics and then depending on what they find that is causing that fault, at LEAST one hour labor, plus parts....I would say $250 is a good ballpark figure....looking up your fault code now.

Posted on Aug 28, 2009

pa1adin
  • 1 Answer

SOURCE: My Envoy has a trouble code P0495. Technician's

test

Posted on Jan 16, 2010

  • 1311 Answers

SOURCE: 2004 gmc envoy code 0128

This an engine coolant temperature fault, most likely caused by a defective thermostat, probably one that is open all the time.

Posted on Sep 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace flan clutch and water pump and alternator but still makes a clicking noise, what can cause this problem?


A brand new out of the box fan clutch did this to me. Ticks are driving me crazy. It's probably your new fan clutch unfortunately. Mine was purchased at Autozone if this helps.

Feb 16, 2014 | 2002 GMC Envoy

1 Answer

P0106/po526 code


2 different problems....106 is MAP sensor code, clean your throttle body with the battery disconnected. 526 is fan speed sensor. There is a common problem with the connector that goes into the fan clutch. Check for frayed wires here or burnt connector, if all ok, may need new fan clutch.

Jan 24, 2014 | 2004 GMC Envoy

2 Answers

2002 gmc envoy is over heating have changed the thermostate and the put new radiator but its still over heating any suggestions


Have the FAN CLUTCH checked. they are a common failure. Get a AC DELCO or the part from the dealer. Why was the radiator replaced? Heater work OK? A/C works OK?

Sep 22, 2011 | 2002 GMC Envoy

1 Answer

What does the code p0483 means for a gmc envoy?


DTC P0483 is set when the difference between the commanded cooling fan speed and actual cooling fan speed is greater than 1,000 RPM.
Reset the comp with the scanner, if it comes up again, then you may need to replace your fan clutch.
Technical Service Bulletin (TSB #04-06-04-090A) says, "The diagnostic calibration in the PCM may allow the DTC P0483 to set improperly." The bulletin directs technicians as follows: "Reprogram the Powertrain Control Module (PCM) with a new service calibration titled, 'New calibration to reduce the potential for setting P0483.'" this will have to be done at the dealership, or by a qualified mechanic.
Good luck.

Aug 19, 2011 | 2004 GMC Envoy

1 Answer

Have a 2003 gmc envoy. trying to take clutch fan motor off. took off bolts from the pulley cant get it off. Help.


YOU HAVE TO REMOVE FAN AND CLUTCH TOGETHER FROM VECHICLE.YOU CAN USE WRENCHES TO HELP REMOVE FAN FROM CLUTCH.

Sep 21, 2010 | 2003 GMC Envoy

1 Answer

2002 envoy 4wd problem. clicking sound comes and


Clicking sound- Possible electronic fan clutch failing. This is a typical problem with the 4.2L I6. When you hear the clicking, open the hood and listen if its coming from the fan clutch on front of the engine. this could also cause abnormal engine and transmission cooling. As for the "N" light and 4wd issue, have scanned at the dealer....Hopefully this helps

Jul 18, 2009 | 2002 GMC Envoy

1 Answer

2004 GMC Envoy with a P0526 sensor problem


This code indicates a problem with the fan clutch, the speed it is running is not the speed it was commanded to run/ The fan clutch assembly needs replacing.

Jun 03, 2009 | 2004 GMC Envoy

1 Answer

Engine Light on. Dealership says fan clutch is Slipping


Work for GM dealership.The fan can be replaced anytime and a pcm reflash can also be done anytime.If the service engine soon lamp is on because of cooling fan code it is broke!!!!! As far as the price sounds about right

Jan 28, 2009 | 2002 GMC Envoy

1 Answer

Ticking noise coming from my 2004 envoy


like ticking while idling try unplugging eletric fan clutch harness to see if it goes away if it does replace fan clutch and its called a viscuss clutch fan.

Dec 28, 2008 | 2004 GMC Envoy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...