Question about 2006 Hyundai Santa Fe
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Fuse location for headlight
There is a fuse, but only for both headlights, not just one. The headlight bulb must be out. Or the wire connector came off. Take care and God Bless.
Posted on Jan 26, 2009
SOURCE: won't squirt, fuse ok...
It needs a motor It is located on the bottom left hand side of the washer bottle. left hand side if you are faceing the front of the car. There is one connector and 2 hose thats you will have to remove. Your going to have to lay on the ground to get it you cant get it from up top.
Posted on Mar 27, 2009
try taking a pin and cleaning the holes on the squirters and if that does not work check the washer pump it is located on the washer fluid tank
Posted on Apr 17, 2009
There is more than ONE fuse which supplies power to the AC system, especially when there is two kinds of AC - Manual OR Full Auto systems.
Posted on Jun 05, 2009
I am working on this very problem as I type! It's located directly behind the glove box.
empty the tray of glove box items before beginning.Remove glove box by taking the stop string out of the right side where it goes into the glove box tray.
Pull the string into the box and rotate the T stop so it will follow the string out the hole. Then remove the 1-2 screws on the left side of the glove box and the right side of the glove box.
The tray edges need to be pushed inward so the tray will flip open past the rubber stop slots allowing easy access to the screws. The whole box assembly should pull slightly toward the seat and drop out.
The cabin air filter is located behind the smoke colored fabric (Velcro backed) and can be accessed by pulling open the fabric flaps, then turning the small knob in on the filter slot cover. Doing this will allow the lower half to be pulled downward separating it fromt he upper half of the cover, now pus the upper half of the cover slightly up and remove it. the filter can now be accessed, pulling into the passenger compartment and out of the car to be discarded. The filter is approximately 8 inches square by 1 inch thick. If you do not have the OE filter or want to save money, you can get a high quality pleated home HVAC filter in 4x the size of the removed filter. Cut it into 4 filters of correct size and insert one at a time every 6-12 months.
Whole change process will take 30 minutes average, with a bit longer the first time.
Phillips screwdriver, and stubby phillips should be all you need for tools. Recommend latex gloves to avoid handling dirty filter.
Reassembly is the same process in reverse
Posted on Dec 30, 2009
Tips for a great answer:
Feb 24, 2015 | 2004 Hyundai Santa Fe
Oct 05, 2013 | 2005 Hyundai Santa Fe
Mar 22, 2013 | 2007 Hyundai Santa Fe
Mar 26, 2011 | 2006 Hyundai Santa Fe
Jan 29, 2010 | 2007 Hyundai Santa Fe Limited
Jan 18, 2010 | 2002 Hyundai Santa Fe
May 27, 2009 | 2004 Hyundai Santa Fe
Apr 17, 2009 | 2003 Hyundai Santa Fe
Jun 07, 2008 | 2003 Hyundai Santa Fe
15 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: