Question about 2001 Chrysler PT Cruiser

Open Question

How to fix egr valve on 2001 pt cruiser

Bad gas milegage

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 290 Answers

SOURCE: chrysler pt cruiser fuel filter location?

Under vehicle, center, below seating area, mounted on top of fuel tank, in fuel pump module

Posted on Mar 27, 2009

  • 1986 Answers

SOURCE: replace EGR valve on a PT Cruiser

The valve is located just above where the engine and transmission seam meets. There is the metal exhaust gas tube with 2x8mm bolts and a fiber gasket. The EGR mounts to the cylinder head with 2 10mm bolts and a metal gasket. There are 2 vacuum lines that go to the control solenoid, a black plastic pod moounted under the throttle body. It clips into the TB mounting bracket, and has a 3rd vacuum supply line and 1 electrical connector.

Posted on Sep 14, 2009

c17hydro
  • 2984 Answers

SOURCE: Location of powertrain control module on 01 PT Cruiser?

The PCM attaches to a bracket welded on the dash panel

2d254d5.gif

Posted on Oct 31, 2009

BCAS1298
  • 3092 Answers

SOURCE: replacing a starter in a PT. Cruiser 2001

Remove battery and battery support you'll be able to undo starter bolt's trough there and slip starter out.

Posted on Dec 08, 2009

Testimonial: "This didn't help, because you had to remove the engine structural collar under the starter to get at the starter bolt. It was more complicated."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2001 pt cruiser has no egr valve. is this correct.


It should have an egr valve. Check by where the motor and trans meet

Jul 22, 2014 | Cars & Trucks

1 Answer

No ac, compressor is working, one of the ac lines to the firewall is nice and cold, but nothing inside the car. 2001 pt cruiser. Fan works and recirculation door is working.


Hi there
You have to check the gas charge on the a/c and then find the leak. If there are no gas leak and the gas charge is right, check the TX valve inside under the dash. Good luck with that.

Apr 25, 2011 | 2001 Chrysler PT Cruiser

2 Answers

I have a code P1193 on my 2001 PT Cruiser. What does this code pertain to?\r\nIs it the EGR valve or something else?


its the intake air temp sensor located on the air duct between the throttle body and the air filter housing

Jan 13, 2011 | 2001 Chrysler PT Cruiser

1 Answer

What are the typical symptoms of a bad egr valve on a pt cruiser?


A vacuum leak at the egr valve can cause rough idle and almost stalling condition.

A non functioning egr valve that is plugged up won't affect driveability, but NOx will be in the exhaust at normal operating temperature which may not be good for an emissions test if they test for that in your area.

Good luck on this repair.

Nov 20, 2010 | 2003 Chrysler PT Cruiser

1 Answer

Pt cruiser cut off and will not restart this happen at light while idling, i try to restart but just turns over


Not sure if it still works,but this works on a 2001 PT.To see if there are any codes turn the key on then off 3 times fast,on the third time leave it on,Where the odometer is will display the trouble codes.Just count on1 on 2 on 3.At 24,000 ,68,000 110,000 miles my wife's 01 PT would not start(EGR Valve)at 75,000 & 140,000 crank position sensor.First time ran bad second time just died and wouldn't restart.Well hope the key thing still works and good luck.If you can get the codes then go to this link.
http://www.ptcruizer.com/computer-codes.html

Apr 01, 2010 | 2006 Chrysler PT Cruiser

3 Answers

Errors P1684 given, how do I fix


The first code, p1684, just states the battery has been dis-connected in the last 50 start cycles.
Code p0401 is the EGR flow. You may need to replace the EGR valve.
Code p1193 is the intake air temperauture ( IAT) sensor. It may also need to be replaced.
Have your mechanic take a look at those, and please let me know how it goes.

Feb 11, 2010 | 2001 Chrysler PT Cruiser

2 Answers

Egr


What's that's telling you is that the EGR valve is plugged up and that this part needs to be replaced.

Nov 01, 2009 | 2001 Chrysler PT Cruiser

2 Answers

2005 Pt Cruiser idles rough at stop lights/ poor gas mileage.


i hav a 2003 pt cruiser 2.2 crd touring it wont go over 3000 revs engine light cums on. error code p0243 i hav replaced wastegate solenoids cleaned egr valve cud it be the mass air flow sensor that has a problem thanx

Sep 18, 2009 | 2005 Chrysler PT Cruiser

2 Answers

Replace EGR valve on a PT Cruiser


The valve is located just above where the engine and transmission seam meets. There is the metal exhaust gas tube with 2x8mm bolts and a fiber gasket. The EGR mounts to the cylinder head with 2 10mm bolts and a metal gasket. There are 2 vacuum lines that go to the control solenoid, a black plastic pod moounted under the throttle body. It clips into the TB mounting bracket, and has a 3rd vacuum supply line and 1 electrical connector.

Sep 14, 2009 | 2002 Chrysler PT Cruiser

Not finding what you are looking for?
2001 Chrysler PT Cruiser Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...