Question about 1986 Toyota Pickup 4WD

1 Answer

Oem clock for a 86 toyota pickup,

Hi, my 86 toyota pickup did not have a digital clock so i bought one off ebay, it has four wires coming out of it do you know were they go? Thanks Mark

Posted by on

  • markk416 Jan 13, 2009

    Thank you very much! It was just like you said it was! Mark



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 233 Answers

If you look in the dash where the clock goes, you will find the 4 pin plug for the clock taped off to the side with blue tape- they all had wiring for the clock, regardless of wether or not they were actually equipped with them.

Posted on Jan 12, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why is the heater blower not working on my toyota 86 avalon

its more than likely a fuse. radio and clock are on the same fuse.
but not sure think that the blower is on a different way is check them all.

Jan 19, 2014 | 1998 Toyota Avalon

1 Answer

Toyota pickup 94 model cant get spark plugs 2 fire replaced pickup coil igniter rotor buton wires cap coil fires plugs wont

I had to replace the magnetic pick-up sensor on the side of the distributor that tells the coil when to fire on my 86 truck. It was $80 and slips onto the distributor held on by the cap.

Mar 29, 2013 | 1994 Toyota Pickup

1 Answer

Brake/turn lights on 1987 Toyota Pickup

Hi, a couple things. First is ur flasher mod installed? Next check the grounds om the tailights. U may have lost it if u had to mount the fixture differently. Hope that helps

Apr 09, 2017 | 1987 Toyota Pickup

1 Answer

I understand that '86 4Runners were built on a Toyota pickup chassis. What model pickup was that? I'm looking for a trailer hitch, but catalogs don't list the '86 4Runners. They start at '87s. So I...

If what you say is true. The only pickup it could possibly be is the Toyota Pickup. CURT offers the 13086 hitch for the 84-95 light pickups. If there is a lot of rust, this is going to be rather difficult as the bolts mounting the bumper will more than likely need to be cut. I can't find any information confirming fitment, but i'm sure this is your best bet. Custom fabrication would be your only other option.

Dec 10, 2010 | 1986 Toyota 4Runner

1 Answer

I have a 86 4x4 pickup that i need to wire a flat four plug on it to tow my trailer. my wire kit i have has a green, yellow, wire for brake and turn signal, but the truck has two wires for that what one...

You could use a probe type tester - relatively cheap at an automotive supply store. Ground the clip side to a good clean ground and turn on the system you want to tap into and test for current by sticking the probe side into the wirre you suspect is the circuit you are looking for. Be careful not to jab your hand or stick the probe straight through and short the probe to ground. Have someone apply the brakes for you and test forbrake circuit. Green and yellow wires on your kit are brakes, green is right turn, yellow is left turn, brown is running lights and white is ground.

Nov 19, 2010 | 1985 Toyota Pickup

2 Answers

Hi,my 96 toyota corolla did not have a digital clock so i bought one off ebay, it has four wires coming out of it do you know were they go? Thanks

one 12 v feed permanant ,one earth ,one light feed and one 12v switchable from ignition switch to make it light up when ignition is turned on --- i think ??

Mar 15, 2010 | 1996 Toyota Corolla

1 Answer

91 toyota 22re pickup stalls on idle

May have a plugged catalitic conveter or muffler. So do you know which plug is #1? the very front one also make sure that you start with the number one plug slot it shold be marked with 1 then go around it, you may have damaged the plug wires when pulling them off. And Buy OEM for your toyota there are plugs that just won't run in the toyota engines also set the gap on the plugs they are never right from the store.

Jun 02, 2009 | 1994 Toyota Pickup

1 Answer

Cant find fuses for gages or turn signals

Here is a few if you are still looking...


Jun 02, 2009 | 1986 Toyota Pickup 4WD

2 Answers

Clock and the radio

they have 2 fuse boxxes 1 under dash and 1 in engine compartment

Feb 20, 2009 | 1994 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides