Question about 1994 Lincoln Town Car

1 Answer

Get lots of uncontrollable heat only. Could it be blend door?

1996 town car. air compressor works fine and there is freon in system.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has written 2 tips or uploaded 1 video tip.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 15 Answers

Yes, this 'could' be the Blend Door Actuator.Most of the time when the Actuator in this car breaks, you can hear it (thedoor) slopping around and heat intensity varies a bit. 

Here's a write-up on that situation:

Posted on Feb 23, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Air conditioner blows heat, conditioner was charged, freon, checked relay switch, fuse, door blend alol fine still hot air, was told maybe a block in V shape hose is it temp control value Help

Only way to tell if A/C Evaporator Core Orifice tube is plugged is by looking at A/C gauge readings , An if it is plugged you more then likely need a new compressor , they become plugged with metal particles from worn out compressor. Your best bet would be to take your vehicle to a qualified repair shop .

Jun 27, 2016 | 1998 Lincoln Navigator

1 Answer

Air conditioner blows heated air

Sounds like ??
If the compressor is running and the system is full of freon, you may have a blend door problem under the dash. The blend door directs air flow thru the heater core and evaporator core depending on the temp setting on the dash.

Jul 24, 2012 | 2000 Mercury Grand Marquis

1 Answer

Air conditioning will not work

If the system is charged with freon, and the compressor is running, you should have one cold line and one hot line in the engine compartment.
That would mean the freon is flowing thru the system.
If that is the case, you may have a blend door problem under the dash. The blend doors direct air thru the heater core and the evaporator core depending on the temp setting on the dash control.

Jul 24, 2012 | 2007 Ford Five Hundred Limited Sedan

1 Answer

Ac is blowing hot air, but has coolant in it. Is it a compressor problem?

If the system is charged with freon, you need to know if the freon is flowing. A mechanic would check high and low pressure with a gauge while the compressor is running. If the ac system is working correctly, you could have a blend door problem inside the truck. The blend door directs air thru the heater or the ac evaporator depending on the control on the dash.

Jul 23, 2012 | Ford Cars & Trucks

1 Answer

A/c not blowing cold air on 2002 toyota camry

low on freon, faulty relay, faulty low pressure switch, faulty compressor and/or clutch, blend door stuck or not cutting off heat

Jun 27, 2012 | 2002 Chrysler Town & Country

1 Answer

Air blows cold in rear but warm in front vents.

If it is cold in the rear, that eliminates the "freon" part of the system. (It apparently has enough freon and the compressor is apparently working.)

So that leaves you with a blend-air door problem on the front A/C unit. That may be a blend-air door actuator, a broken blend-air door, or a faulty control head. (Proper diagnosis required)

May 18, 2012 | 2002 Mercury Villager

2 Answers

When ac is on heat comes out

The system may be under charged. Does the compressor kick on? The blend air door for the hot and cold may be stuck in the heat position. The tempature setting moves a blend air door between the heater core and the A/C evaporator.

Sep 16, 2011 | 2000 Mercury Grand Marquis

1 Answer

Ac/heater blend door

pull the dash my friend ,it sould have a motor

Jun 28, 2009 | 1995 Lincoln Town Car

1 Answer

AC/Heater control problem

In the dash there is a part called the blend door and blend door motor. This allows you to have warm air, and not just cold AC or hot heated air. This motor goes out and whatever position it "dies" in is what kind of air you get. The part is relatitively cheap but the labor cost is huge, because the dash needs to be removed for access.

May 05, 2009 | 1995 Lincoln Town Car

1 Answer

2000 Jeep Grand Cherokee Ltd 4.0L A/C problems

this is most likely a a lack of r-134a (as freon is no longer used), if your system is completely out or close to it then the pressure sensor will not allow the compressor clutch to engage, it is also possible that there is an electrical issue but less likely. to know for sure you need to put some gauges on the system

Mar 21, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Lincoln Town Car Logo

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts


Level 3 Expert

63583 Answers


Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides