Question about 2006 Dodge Magnum

1 Answer

2006 dodge magnum check engine light stays on had it checked will not let machine into computer to determine problem

Posted by on

  • Anonymous Mar 27, 2014

    tail light assembly removal



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Get in the car, close the door. Perform the following steps fairly quickly (less than 3 seconds) :

Turn key to ON
then back to ACC
then to ON
then back to ACC
then to ON

If there are any stored codes, they will appear immediately, in place of the odometer. For instance an "INTAKE AIR TEMPERATURE SENSOR CIRCUIT HIGH" error will set a code of P0113.

You may also try and pull Fuse 11, and wait 10-15 seconds to reset the cars internal computers.
More information can be foudn here:

Posted on Jan 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I Have A 2006 Dodge Magnum And I Do Not Have A Check Engine Light On But I Have A Red Lightning Bolt On The Dash And I Lose Power Driving. What’s The Problem?

The red lightning bolt usually indicates a charging issue.When you say it loses power... do you mean the battery goes dead. If so, check the charge rate with a volt meter at idle. Should be 14.2 volts to 14.6 volts.
Note: Have it scanned if determined a charge issue. It may be a failing computer, and not the alternator.

Dec 10, 2017 | Dodge Cars & Trucks

1 Answer

2006 dodge magnum oil light came on chimed then went out

You got a false signal for some unknown reason, Not to worry, If there is a pressure problem the light will either stay on or blink on and off.

Nov 15, 2013 | 2006 Dodge Magnum

1 Answer

The check engine light on my 2007 Dodge Magnum flashes 7 times,what's that mean?

Hello I have a 2007 Magnum 2.7L that has code p0302 cylinder#2 misfire seems to have coolant loss but can find no leaks. Recently had another code p0300, so both are active check engine light started flashing but stop and stayed solid. Not driving it. Replaced spark plugs should I replace coils? Any feedback please.

Jan 17, 2012 | 2007 Dodge Magnum SE

1 Answer

2006 dodge magnum check engine light is on

Well have you had a obd2 computer plugged into the diagnostic port and had it checked to see what the error is. This will be done for free at local autostores like an autozone. Go there and have it done and tell me what the error is and we can go from there how to fix it.

Sep 02, 2010 | 2006 Dodge Magnum

2 Answers

2006 Magnum: my check engine light comes on but the car is runn...

The check engine light comes ON when the cars computer(the ECU) notices any kind of electrical problem in car.In some cases the check engine light comes on then turns off.In that case the exact error is not getting confirmed so this happens.But once the problem gets confirmed the engine light will remain permanently ON till the problem gets solved.In this case i suggest you to get your car scanned at autozone service center.Its absolutely free.In case in the car scanning,if any error code is retrieved then you can check which part is faulty as per the error code.In case if no error code is retrieved then you can continue driving,till you get any confirmed indication. ---------- This will help.Thanks.Helpmech.

May 17, 2010 | 2006 Dodge Magnum

1 Answer

Check engine light

go by autozone and have them pull the code or codes they will do it for free and give you an idea of what the problem is!

Mar 02, 2010 | 2006 Dodge Magnum

1 Answer

Check engine evap code

Its a closed lope system and has to be reset at the dealer,you can try unhooking you battey but I dont think that will work on that fault

Oct 03, 2009 | 2006 Dodge Magnum

1 Answer

2006 dodge magnum check engine light stays on had checked

Try disconnecting the battery then connecting the scan tool then reconnect the battery

Jan 12, 2009 | 2006 Dodge Magnum

Not finding what you are looking for?
2006 Dodge Magnum Logo

925 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides