Question about 2004 Honda CR-V

Open Question

Climate Control Cluster

The Climate Control Cluster works fine. However, when I turn on the Park/Headlight Switch the cluster does not illuminate. I have checked the fuses and all fuses are operational. Is there a way to open the Control Cluster and change the bulb(s) that illuminate same cluster. The Climate Control Cluster, despite controlling the temp, ect. accurately, is the only cluster that does not illuminate when I switch on the Park/Headlight Switch. How do I fix the nagging problem with the cluster.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
m-sykes
  • 71 Answers

SOURCE: Instrument Panel Lights

hey

yes theres bulbs right behind your clocks!! theyre actually prity handy to take of.... the key is to find all of the scews that hold the clocks in!! then with a bit o fiddling it should come out!! and the bulbs twist out!!

best of luck:)
damien

Posted on Aug 22, 2008

Ad
emissionwiz
  • 76848 Answers

SOURCE: 1990 honda civic dx no

The first thing you want to check is to see if the rheostat for the dash panel lighting isn't turned "off". There is a button on the instrument panel to the left of the steering wheel just below the gauge cluster corner. push the round knob in and it will pop out. when it does you can turn the knob to adjust the brightness of the dash lights.

Posted on Sep 05, 2008

  • 78 Answers

SOURCE: Climate control buttons dont work

these cars have i issue of the knobs breaking in the back try switching the blower knob with it and see if it works as far as the clock they are not tied together most likely the bulb is burned out stick a small screw driver under it pull down the clock pops out you will be able to see the bulb

Posted on Oct 29, 2008

  • 4 Answers

SOURCE: One high beam works one doesn't, gauge cluster does not light up

most honda have a light module under driver side dash panel and this module is often shortcut or burned by the inside (brown connecter)

Posted on Dec 21, 2009

bayyagg
  • 1672 Answers

SOURCE: Need to know location of turn signal relay.

Hi,

The flasher relay would be in your fuse box, under the dash at the driver side. You could look at the cover of the fuse box to see the location of the relay.

Hope that helps you out!

Thanks for using Fixya!

Posted on Dec 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the fuse number for the dashboard lights on a 2007 Ford Focus 3 door hatchback?


Principles of Operation
The instrument cluster and panel illumination consists of dimmable and non-dimmable illumination components. The dimmable illumination is controlled by the instrument panel dimmer switch, which allows the brightness level of the backlights to be adjusted to the customer preferences. With the parking lamps ON, the instrument panel dimmer switch uses electronic circuitry to provide a variable pulse width modulated (PWM) output to the instrument panel and all applicable switches depending on the driver-controlled level of intensity. The headlamp switch backlighting consists of 2 constantly illuminated LED bulbs that are powered by separate circuits. Battery voltage is supplied to the first bulb when the ignition switch is in the RUN position. Battery voltage is supplied to the second bulb with the parking lamps ON. The non-dimmable illumination allows for full intensity dependant on the ignition switch position.

Inspection and Verification
  1. Verify the customer concern.
  1. Visually inspect for obvious signs of mechanical or electrical damage.


Visual Inspection Chart Mechanical Electrical
  • Headlamp switch
  • Instrument panel dimmer switch
  • Circuitry
  • Connector(s)
  • Headlamp switch
  • Instrument panel dimmer switch
  • Illumination source(s)

  1. If an obvious cause for an observed or reported concern is found, correct he cause (if possible) before proceeding to the next step.
  1. If the cause is not visually evident, verify the symptom and GO to Symptom Chart .

Symptom Chart
Symptom Chart Condition Possible Sources Action
  • The control illumination is inoperative
  • Headlamp switch
  • Circuitry
  • Go To Pinpoint Test A .
  • The instrument cluster illumination is inoperative
  • Circuitry
  • Instrument cluster
  • Go To Pinpoint Test B .
  • The climate control panel illumination is inoperative
  • Circuitry
  • Climate control panel
  • Go To Pinpoint Test C .
  • The audio unit illumination is inoperative
  • Circuitry
  • Audio unit
  • Go To Pinpoint Test D .
  • The transmission control lever illumination is inoperative
  • Circuitry
  • Transmission control lever illumination bulb
  • Go To Pinpoint Test E .
  • The hazard warning switch illumination is inoperative
  • Circuitry
  • Hazard warning switch
  • Go To Pinpoint Test F .
  • The traction control switch illumination is inoperative
  • Circuitry
  • Traction control switch
  • Go To Pinpoint Test G .
  • The window control switch illumination is inoperative
  • Circuitry
  • Window control switch
  • VERIFY the operation of the window control switch in question. If the window control switch is inoperative, REFER to Section 501-11 . If the window control switch operates correctly, INSTALL the new window control switch in question. REFER to Section 501-11 .
  • The instrument panel illumination does not dim
  • Headlamp switch
  • Circuitry
  • Go To Pinpoint Test H .

Pinpoint Test B: The Instrument Cluster Illumination Is Inoperative
Normal Operation A variable pulse width modulated (PWM) voltage is supplied to the instrument cluster through circuit 29S-LA31 (OG/BU). The instrument cluster is grounded through circuit 91-GG14 (BK/OG).
    Possible Causes
  • circuit 29S-LA31 (OG/BU) open
  • circuit 91-GG14 (BK/OG) open
  • instrument cluster
PINPOINT TEST B: THE INSTRUMENT CLUSTER ILLUMINATION IS INOPERATIVE CAUTION: Use the correct probe adaptor(s) when making measurements. Failure to use the correct probe adaptor(s) may damage the connector.

Sep 24, 2017 | Ford Cars & Trucks

1 Answer

I have an 06 ford explorer the instrument cluster lights and radio lights don't work


Are these the lights you are talking about ?
Instrument Cluster and Panel Illumination The instrument cluster and panel illumination is used to provide backlighting to the instrument panel, switches, and control components when the headlamp switch is in either the PARKING LAMPS ON or HEADLAMPS ON position. The level of intensity is adjustable by rotating the instrument panel dimmer switch either up to increase intensity or down to decrease intensity.
Fixed Backlighting When the accessory delay relay is energized, switched voltage is supplied to the non-dimmable components and switches.
Dimmable Backlighting When the parking lamps or the headlamps are in the ON position the smart junction box (SJB) monitors the input from the instrument panel dimmer switch. The SJB sends a pulse-width modulated (PWM) voltage to the dimmable components and switches based on input received from the instrument panel dimmer switch. The SJB also sends a message over the controller area network (CAN) to the audio unit, and the instrument cluster to indicate the backlighting intensity level.
If you don't know about PWM an smart junction box your better off taking your vehicle to a quailified repair shop ! You don't the diagnostic tools or technical information . May have DTC'S - diagnostic trouble codes stored in the SJB (computer ). Do you know where SJB is located ?
Visual Inspection Chart Electrical
  • Smart junction box (SJB) fuse 23 (15A)
  • Bulb(s)
  • Circuitry
  • Connectors
  • Illumination source(s)
  • Auxiliary climate control switches (if equipped)
  • Door lock control switches
  • Window control switches
  • Headlamp switch
  • Dual electronic automatic temperature control (DEATC) module
  • Audio unit
  • SJB
  • Instrument cluster

  1. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  1. If the cause is not visually evident, connect the diagnostic tool to the data link connector (DLC) and select the vehicle to be tested from the diagnostic tool menu. If the diagnostic tool does not communicate with the vehicle:
  • check that the program card is correctly installed.
  • check the connections to the vehicle.
  • check the ignition switch position.
  1. If the diagnostic tool still does not communicate with the vehicle, refer to the diagnostic tool operating manual.
  1. Carry out the diagnostic tool data link test. If the diagnostic tool responds with:
  • CAN circuits fault; all electronic control units no response/not equipped, refer to Section 418-00 .
  • No response/not equipped for SJB, refer to Section 419-10 .
  • System passed, retrieve and record the continuous diagnostic trouble codes (DTCs), erase the continuous DTCs, and carry out the self-test diagnostics for the SJB.
  1. If the DTCs retrieved are related to the concern, go to the Smart Junction Box (SJB) Diagnostic Trouble Code (DTC) Index.
  1. If no DTCs related to the concern are retrieved, GO to Symptom Chart .
    • The control illumination is inoperative
    • Fuse
    • Smart junction box (SJB)
    • Go To Pinpoint Test A .
    • The instrument cluster illumination is inoperative
    • Instrument cluster
    • CHECK the audio unit illumination for correct operation.
      • If the audio unit illumination operates correctly, INSTALL a new instrument cluster. REFER to Section 413-01 . TEST the system for normal operation.
      • If the audio unit illumination does not operate correctly, REFER to Section 418-00 to continue diagnosis of the communications network.
    • The audio unit illumination is inoperative
    • Audio unit
    • CHECK the instrument cluster illumination for correct operation.
      • If the instrument cluster illumination operates correctly, REMOVE the audio unit. REFER to Section 415-01 . SEND it to an authorized repair facility. TEST the system for normal operation after the repair.
      • If the instrument cluster illumination does not operate correctly, REFER to Section 418-00 to continue diagnosis of the communications network.

Sep 04, 2016 | 2006 Ford Explorer

1 Answer

I lost the fuse diagram for my dads 95 dodge grand caravan. Can anyone help me out with one?


#1: Panel Illumination
#2: Guages,Right High beam headlight and the high beam indicator
#3: Rear Wiper, Left headlight High Beam
#4: RH park, backup lights switch and relay,Speed porpotional steering module,power door lock switch illumination and daytime running lights(Canada)
#5: Power Door locks,Power Mirrors,vanity,dome,map,ignition and trunk lights,sunroof,radio,power antenna,body control module and power for the data link connector
#6:Heated mirrors,heated rear window indicator
#7: Instrument cluster illumination,park and tail lights
#8: Cigarette lighter,Radio Amp and horns
#9: Power door lock motors
#10: Not used
#11: Radio
#12:Left low beam head light
#13,14,15,16 not used
26153814-2qh1jtrzfrcszgktlooiom5o-3-0.jpg

Apr 05, 2016 | Dodge Cars & Trucks

1 Answer

98 cad deville headlights stay on headlight & twilight sentinel switch is off along with the ign. i'm stumped can you help. Ted


Did you check the high/ low beam headlamp relay ? Stuck contacts in side relay .Plus headlamp relay an DRL relay .All are located in the underhood relay center .
The headlamps are controlled by the body control module (PZM). The battery positive voltage (B+) is applied at all times through the HDLPS fuse at the switch side of the headlamp relay via CKT 340 (ORN).
Battery positive voltage (B+) is also applied at all times through the RADIO/PHONE fuse to the coil side of the high/low beam headlight relay via CKT 40 (ORN/BLK). Both relays are controlled by the PZM at separate output cavities.

When the headlamp switch is in the HEAD position, the instrument cluster headlamp switch input is grounded through CKT 10 (YEL) and the headlamp switch. The instrument cluster sends a request through the Class 2 serial data line to the BCM in order to active the low beam headlamps. The BCM supplies positive battery voltage (B +) to the coil side of the headlamp relay via CKT 352 (WHT). The coil receives ground through the headlamp switch via CKT 10 (YEL). The coil of the headlamp relay is then energized, closing the switch contacts. Battery positive voltage (B +) is then applied through the high/low beam headlamp relay via CKT 1346 (LT BLU) and the L HDLP LO fuse and R HDLP LO fuse via CKT 12 (TAN) to the left and the right low beam headlamps respectively.
This may sound pretty complex .
1
Was the Headlights System Check performed?
--
YES - Go to Step 2
NO - Go to Headlight System Check
2
Are the park lamps also on?
--
YES - Go to Step 3
NO - Go to Step 13
3
Connect a Scan Tool to the data link connector (DLC).
Inspect the IPC headlamp switch input.
Does the headlamp switch operate properly?
--
YES - Go to Step 4
NO - Go to Step 10
4
Disconnect the instrument cluster (IPC) connector C3.
Do the headlamps and park lamps turn off?
--
YES - Go to Step 5
NO - Go to Step 6
5
Replace the instrument cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console.
Is the repair complete?
--
Go to Headlight System Check
Is the repair complete?

6
Disconnect the body control module (PZM) connector C2.
Do the headlamps and park lamps turn off?
--
Go to Step 7
Go to Step 8
7
Replace the body control module (PZM). Refer to Body Control Module Replacement in Body Control System.
Is the repair complete?
--
Go to Headlight System Check
--

Your best bet is to take it to the dealer .

Mar 18, 2016 | Cars & Trucks

2 Answers

'95 Lincoln town car. Husband was driving uphill and the digital dash suddenly went dark. Radio is working and a/c is not. Exterior light still working and so are interior lights besides the dash


Could be a bad wire possibly chaffing or grounding out to to another wire or frame. Check your fuses. You may want to pull the dash out and check that wiring as well

Jul 07, 2015 | Lincoln Cars & Trucks

1 Answer

How do I replace dash light bulbs on a 2007 Ford Escape?


What lights are not working ? The instrument cluster illumination is inoperative or all the lights ,radio , heater control head, all the switches that would be back lighted.
  • The climate control panel illumination is inoperative , The passenger door lock control switch illumination is inoperative. Could need new dimmer switch , new instrument cluster. When installing a new instrument cluster, it is necessary to upload the module configuration to the scan tool. Following installation of the new instrument cluster, download the module configuration from the scan tool into the new instrument cluster. Refer to Section 418-01 .
  • Dec 09, 2014 | 2007 Ford Escape

    1 Answer

    Gauge cluster Illumination problems


    Do you have the dash light dimmer control turned off by mistake, a common cause. It is next to the headlight switch.

    Jul 25, 2012 | Cars & Trucks

    1 Answer

    No indicators working found fuse box which fuse?


    When you are talking about "indicators" we could assuming that your are refer about signal lights. This work with "flashers" devices.

    For 1996 Audi A4 2.8L SFI 6cyl the Flasher is located in front seating area, driver side, under dash, behind dash lower panel, mounted above driver side of steering column.

    About generic fuses, open the driver side door. Remove panel on left side of dash. Fuse box is behind panel:

    Fuse # / Description / Amps
    1 / Heated washer jets / 5
    2 / Turn signals flasher unit / 10
    3 / Headlight washer, illumination of glove compartment, engine compartment, climate control, automatic transmission, instrument cluster / 5
    4 / License plate light / 5
    5 / Instrument cluster, seat heating, test connection for cruise control, bulb monitor for auto-check control, Automatic transmission display, switch lighting, mirror switches and actuators, airbag warning light, outside temperature indicator, Climate control / 10
    6 / Central locking system / 5
    7 / Anti-lock brake system / 10
    8 / Vacant
    9 / Mirror heating / 10
    10 / Vacant
    11 / Cruise control (automatic transmission) / 5
    12 / On board diagnostic system / 10
    13 / Brake lights / 10
    14 / Interior lights, reading lights, anti-theft alarm system, vanity mirror / 10
    15 / Instrument cluster, power windows, climate control, automatic transmission / 10
    16 / Anti-lock brake system, Anti-Slip-Regulation / 5
    17 / Heated door locks / 10
    18 / High beam right / 10
    19 / High beam left / 10
    20 / Low beam right / 15
    21 / Low beam left / 15
    22 / Tail and side marker right / 5
    23 / Tail and side marker left / 5
    24 / Wiper and washer system / 25
    25 / Blower for heating, climate control / 30
    26 / Rear window defogger, mirror heating / 30
    27 / Rear window wiper / 15
    28 / Fuel pump / 15
    29 / Engine timing / 20
    30 / Sun roof / 20
    31 / Tail lights, cruise control, automatic transmission / 15
    32 / Engine timing / 20
    33 / Cigarette lighter / 15
    34 / Engine timing / 15
    35 / Trailer receptacle / 30
    36 / Fog lights / 15
    37 / Radio / 20
    38 / Luggage compartment light, central locking system / 15
    39 / Emergency flasher / 15
    40 / Horn / 25
    41 / Anti-lock brake system / 25
    42 / Vacant
    43 / Vacant
    44 / Seat heating / 30

    Hope this helps (remember to rate and comme this free answeer).



    Jun 16, 2011 | 1996 Audi A4

    2 Answers

    Fuel Pump Fuse Number for a 1998 audi a4 2.8 quattro


    Fuses: Fuse arrangement in fuse panel, behind instrument cluster, left
    Fuse Arrangement In Fuse Panel 62624464

    1 - Heated washer jets 5A 2 - Turn signals 10A 3 - Headlight washer (relay), illumination for glove
    compartment, climate control, Automatic Transmission, instrument cluster 5A 4 - License plate light 5A 5 - Instrument cluster, seat heating, test connection
    for cruise control, bulb monitor for auto-check display, Automatic Transmission display, switch
    lighting, mirror switches and actuators, airbag
    warning light, outside temperature indicator,
    climate control 10A 6 - Central locking system 5A 7 - Anti-lock brake system (ABS) 10A 8 - Vacant 9 - Mirror heating 10A 10 - Vacant 11 - Cruise control (Automatic Transmission) 5A 12 - On board diagnostic system 10A 13 - Brake lights 10A 14 - Interior lights, reading lights, anti-theft alarm system, vanity mirror 10A 15 - Instrument cluster, power windows, climate control, automatic transmission 10A 16 - Anti-lock brake system (ABS), Anti-Slip Regulation (ASR) 5A 17 - Heated door locks 10A 18 - High-beam, right 10A 19 - High-beam, left 10A 20 - Low-beam, right 15A 21 - Low-beam, left 15A 22 - Side marker and tail light, right 5A 23 - Side marker and tail light, left 5A 24 - Wiper and washer system 25A 25 - Blower for heating, climate control 30A 26 - Rear window defogger, mirror heating 30A 27 - Rear window wiper 15A 28 - Fuel Pump 15A 29 - Engine timing 30A 30 - Sun roof 20A 31 - Tail lights, cruise control, automatic transmission 15A 32 - Engine timing 20A 33 - Cigarette lighter 15A 34 - Engine timing 15A 35 - Trailer recptacle 30A 36 - Fog lights 15A 37 - Radio 20A 38 - Luggage compartment light, central locking system 15A 39 - Emergency flasher system 15A 40 - Horn 25A 41 - Anti-lock brake system (ABS) 25A 42 - Vacant 43 - Vacant

    Apr 05, 2010 | 1998 Audi A4

    1 Answer

    I need a printable image of fuse block / 97 ford windstar


    your owner manual sould have fuse chart. Some fuses/ekays in enine compartment. Some in car on left side of instrument panel

    in car

    1d470b5.gif
    Fuse Amps Circuits Protected 1 10 Power Mirrors, Anti-Theft Warning Light, Diagnostic Connector 2 5 Generic Electronic Module, Start Interrupt Relay Coil 3 5 Radio Illumination, Remote Radio Illumination, Electronic Instrument Cluster, Electronic Instrument Cluster PRNDL Illumination, Electronic Instrument Cluster Switch Module, Analog Cluster Illumination, Instrument Illumination 4 — Not Used 5 — Not Used 6 15 Rear Quarter Windows (LH and RH) 7 15 High Mounted Stoplamp, Brake Shift Interlock 8 25 Subwoofer, JBL Amplifier 9 10 Park and Turn Lamps, Side Marker Lamps, License Lamps, Stop Lamps 10 2 High Beam Indicator Electronic Cluster 11 15 Park Lamps 12 10 Remote Radio, Auxiliary Warning Lamp Module, Remote Keyless Entry (RKE) Module, Anti-Theft Controller Module, Radio Illumination 13 15 Radio, CD Disc Changer 14 5 Electronic Chromatic Mirror, Analog Cluster Indicator Lamps, Air Bag Module 15 — Not Used 16 15 Horns, Horn Relay Coil 17 15 Fog Lamps 18 25 Front Wiper Motor, Front Washer Pump, Wiper/Washer Relays 19 10 Generic Electronic Module (Pin 57), Electronic Instrument Cluster 20 25 Integrated Relay Control Module, Ignition Coil 21 10 Air Bag Module, Rear Window Defrost Relay, A/C Clutch, Temp Blend Door Actuator, Brake Shift Interlock 22 20 Rear Cigar Lighter, Power Plug 23 15 Multi-Function Switch 24 20 Rear Wiper Motor, Rear Washer Pump 25 10 Turn Signal Lamps, Instrument Cluster Turn Indicator 26 15 LH Aero Headlamp, Left and Right Trailer Stop/Turn/Hazard 27 15 Hazard Warning Lamps, Instrument Cluster Turn Indicator 28 15 Instrument Panel Cigar Lighter 29 15 Battery Saver Relay, Interior Lamp Control Relay, Interior Lamps, RH and LH Keyhole Lamps 30 25 Backup Lamps, Electronic Cluster 31 10 Rear Air Suspension 32 15 RH Aero Headlamp, Trailer Park Lamps 33 15 Anti-Lock Brake (ABS) Relay, Anti-Lock Brake (ABS) Module, Daytime Running Lamp (DRL) Module 34 30 One Touch Relay, LH Window Motor 35 15 Anti-Theft Controller Module 36 30 A/C Mode Switch 37 20 Door Lock Actuators, Memory Door Lock Relay 38 15 Heated Mirrors (LH and RH) 39 30 Auxiliary Blower Motor, Ref. Valve Solenoid 40 30 Window Motor (RH) 41 5 Autolamp Relay Coils, Autolamp Sensor 42 — — 43 — — 44 — —

    Mar 15, 2009 | 1997 Ford Windstar

    Not finding what you are looking for?
    2004 Honda CR-V Logo

    Related Topics:

    21 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    76848 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Kevin Daniels

    Level 3 Expert

    1455 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...