Question about Chevrolet Blazer
The side view mirrors are not working, is there a fuse for them and if so where is it located
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1999 Chevy Blazer Starter
the starter is located on the passenger side lower motor. it has two bolts in it that hold it in place. it actually goes through a hole/slot in the transmission to the flex plate.
1st. disconnect the negative cable on the battery.
2nd. raise the vehicle safely and place a jack stand under the vehicle out of your way but near where you will be working(for safety).
3rd. remove the two bolts that hold the starter in place.
4th. remove the wires from the back of the starter.
5th. install in reverse order of above.
note: there may be little plates between the starter and the mounting points called shims. if there are then make sure you put them back.
Posted on Sep 24, 2008
SOURCE: clock and side mirrors
The fuse block is usually under the dashboard, as well as additional fuse box under the hood. Your owners manual would give u that info, if u don't have one, it can be purchased @ Lexus site, don't know how much though. If fuses aren't labeled as u say, just pull them out 1 at a time and check to see which one is burned out. An auto parts store would probably help u locate the fuse box under the dash, (which is where I think the blown fuse is) they want to sell parts, and offer a lot of free services to customers such as testing components, installing wipers etc. good luck countrycurt0
Posted on Oct 13, 2008
97 only had one fuse panel in the dash on the drivers side. There is/was a junction block for power that had/has fusible links on the driver side fender too.
a) 20a pwr accy
b) 30a pwr wdo
1) 20a stop/haz
2) 20a horn/dm
3) 20a tl/ctsy
4) 20a guages
5) 20a Eng-1
6) 25a htr/ac
7)25a pwr aux
8) 30a rr defog
9) 20a ecm/batt
10) 20a emc/ign
11) 20a radio
12) not used
13) 10a rdo/batt
14) 10a illum
15) 10a drl
16) 15a turn/back up
17) 25a wiper
18) 20a brake
19) 20a 4wd
20) 10a crank
21) 20a fog
22) 10a air bag
23) 10a trans
24) 10a prndl
The A/C relay is in the glove box behind a panel that indicate relay. There are three relays in there, the middle relay is the fuel pump and one of the out side relay is for the A/C compressor and the other is for the third brake light. Just can not remember which out side relay is the A/C so just swap the out side relays with one another. Good luck and hope this helps. Keep me posted.
Posted on Jun 25, 2009
make your self a jumper set of wires to test with. Find out what makes what move on the old unit,write down the color wire,then apply power and ground to the new unit onw wire at a time.Mark down the color and what function it did.after testing both units then match your research and put the wires together.I wished I were there.Good Luck!
Posted on Jul 24, 2009
Tips for a great answer:
Jan 30, 2015 | 1999 Chevrolet Blazer
Nov 30, 2014 | 1999 Chevrolet Blazer
Jun 02, 2012 | 1999 Chevrolet Blazer
Aug 03, 2011 | 1999 Chevrolet Blazer
Nov 27, 2010 | 1999 Chevrolet Blazer
Nov 09, 2010 | 2006 Chevrolet Trailblazer
Jul 19, 2010 | 1999 Chevrolet Blazer
Apr 23, 2010 | 1999 Chevrolet Blazer
Jun 03, 2009 | 1995 Chevrolet Blazer
155 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: