Question about 2005 GMC Yukon Xl Denali
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are 2 fuse panels in the Denali.
One is a panel on the drivers side, its on the dash but facing the door.
The ohter is under the dash and above the pedals, this one is much tougher to access.
Your Owner's Manual should tell you where the fuses are that you need to access.
Posted on Oct 20, 2008
There's a lever that connects the driver-side rear shock to the Automatic Level Control module (the air compressor and the ride-height sensor). Disconnect the lever from the shock and rotate it up and hold it. The compressor should kick in when you hold in place after a few seconds. If it doesn't kick in, make sure your fuses and relays are good. Otherwise, you may have a failed ALC module/burned out air compressor (from the shocks being shot). After you replace the shocks (and after you recouped from the heart attack you had when you shelled out $500+ for each shock), replace the ALC module/compressor (it's all one unit), and test it - it should kick on when you rotate the lever up again.
Figure about $350 for the ALC module from your dealer, and make sure the part numbers match! Your truck came with an upgraded ALC module from the 2001-2004 module, which were prone to water damage.
Posted on Dec 30, 2008
Could be the latch mechanism for the door is sticking. You could try using some white grease on the latch and the contact where the latch hooks to. You can purchase the grease from most auto parts stores. You will not need to use alot. Just apply a small amount to the mechanisim and then work it in using the manual handle. Then open and close the door several times to feel the "action". Then apply a little more and repeat. This should loosen the latch and get it working again. Also make sure that none of the tension springs have come loose on the latch. And check the seal around the door and make sure it is not pinched and has a proper fit.
Posted on Dec 29, 2009
I have the exact problem described. I can't find any brass contacts on the door frame of any door. What door are you referring to? The liftgate is closed and locked, so I can't get to that door frame.
Posted on Apr 25, 2010
Tips for a great answer:
Aug 08, 2015 | 2007 GMC Yukon XL Denali
Feb 17, 2014 | 2007 GMC Yukon XL Denali
Nov 25, 2010 | 2005 GMC Yukon Xl Denali
Dec 29, 2009 | 2006 GMC Yukon Xl Denali
Jul 21, 2009 | 2003 GMC Yukon XL
Jul 09, 2009 | 2005 GMC Yukon Xl Denali
Apr 07, 2009 | 2002 GMC Yukon XL
Mar 12, 2009 | 2003 GMC Yukon XL
Aug 19, 2008 | 2005 GMC Yukon Xl Denali
Jun 15, 2008 | 2004 GMC Yukon
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: