Question about 1995 Jeep Grand Cherokee

1 Answer

Auto shut down relay clicking and fuel pump not getting power what do i need to do ?

Posted by on

  • Kjac Dec 09, 2012

    For any one in the future i solved this promblem my self .If this ever happen to any one else i read the message that was displaying on the on da surcurity digram in the vehicle and noticed a flashing red door open on passenger right door . Adjust the button on the inside door.And the pump was restored powere

  • Kjac Dec 09, 2012

    overall it was a surcurity issue

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 21,873 Answers

Check the asd circuit to make sure you have power and ground on the correct terminals. You can switch the relay with another to verify the problem is not the relay.
There is a diagram on the side of the relay and you may need a shop manual for the complete wiring diagram.

Posted on Dec 09, 2012

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
lorimorris20
  • 4 Answers

SOURCE: driving down the road and the jeep shut down. I

try the ignition control sensor. sounds like mine. replaced all the same parts. then sell it while you can. mine took a ****.

Posted on Aug 14, 2009

MNfisherman
  • 11896 Answers

SOURCE: No check engine light,no spark,no fuel pump,no

Either your anti-theft unit is on, or your computer is faulty.

If anti-theft is on, leave key in ON position for exactly 10 minutes, then start car.

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Jeep Liberty not getting gas to fuel pump, all sensors good, fuel pump good. Is there a ASD on this vehicle?


Not getting gas TO the fuel pump ? Yes there is a ASD - auto shut down relay ,but has nothing to do with fuel pump power . Check the fuel pump relay . Videos on you tube testing fuel pump electrical circuit . Fuel Pump Electrical Circuits Description and Operation

Jul 24, 2016 | Jeep Cars & Trucks

1 Answer

2003. Where is fuel pump reset switch?


Sorry ,dodge doesn't have one ! No fuel pressure ? Can you hear the fuel pump run ? , check the ASD relay in under hood fuse / relay box . ASD - auto shut down relay supply's power to fuel pump relay an to ignition system an O2 heaters .

Oct 31, 2015 | Dodge Grand Caravan Cars & Trucks

1 Answer

No power to the fuel pump have checked all fuses


There are 2 relays that control your fuel pump. 1 is a fuel pump relay and the other is a Auto shut down relay or ASD relay.

Nov 03, 2013 | 2005 Dodge Durango

1 Answer

I Have a 94 cherokee country with a 56028297 ecu,it has no power at the grey wire at the ecu,it does flash sometimes and I can hear the relay work sometimes. I can bypass the fuel pump relay circuit and...


If you hear relays clicking sometimes and the jeep won't start, at those times, is the check engine light illuminated on the dash, or not? If no check engine light is on the dash, at times when the jeep won't start, your ecu is in need of repairs. The ecu sends power to the ignition and fuel relays and when the ecu starts to malfunction, the relays usually start clicking.

May 11, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

Why am i not getting any power to fuel pump? Checked relay, its good and replaced fuse also.


check your asd relay ,(auto shut down) and check owner manual to see were and if you have a fuel pump reset switch they or usely in trunk.

Jan 08, 2011 | 2000 Hyundai Elantra

1 Answer

2005 Ford F-150 5.4 The truck is not starting. When you turn it on it sound like it is not getting fuel to run the engine. Or the fuel pump is not comming on. Need help please.. Thank you


Fuel pump relay probably.There is also a relay which affects the injector output also controlled by the fuel pump relay which is called an auto shut down relay.Try the fuel pump relay first.Then the auto shut down relay.If not either of those,you may need a fuel pump but doesn't seem likely on a 5 year old truck but stranger things have happened.Good luck,Greg A dealer will likely tell you exactly where they are as I do not know parts locations for every car.Most systems,yes,parts locations,no.Happy (inexpensive) Holiday

Dec 05, 2010 | 2005 Ford F-150

2 Answers

Where is the fuel pump relay on a 2001 chevrolet suburban??the fuel pump went out on me while i was driven i changed that out and it still wont start and we dont know where the switch is.could it b...


If there is one it should be on the passenger side in the back behind the panel should have a tag that says fuel pump reset, and also did you connect the wires correct on the pump, do not cross them, should see a + & - on the pump

Sep 18, 2010 | Chevrolet Suburban 1500 Cars & Trucks

4 Answers

No spark and no gas now what


Hi,

If you have no spark and no fuel pump operation,I would strongly suspect the Auto Shut Down relay.
The Auto Shut Down (ASD) Relay supplies power to the ignition coil, fuel injector, electric fuel pump, and the oxygen sensor heater element as long as the key is in the START or RUN position and the Single Module Engine Controller (SMEC) is receiving a reference signal from the distributor.
If the SMEC receives no distributor reference signal for two seconds or more the SMEC interrupts power to the ignition coil, fuel injectors, electric fuel pump, and the oxygen sensor heater element by removing the ASD relay ground.

Thanks for contacting Fixya.

Jul 26, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Where is the emergency fuel cut off switch located?


The neon don't have one, check the fuse and relay's. The fuel pump is also controlled by the Auto Shut down relay (ASD). The power supplied to the fuel pump. Ignition coil, fuel injectors, and parts of the power module is controlled by the logic module through the Automatic Shutdown Relay (ASD). The ASD relay is closed (allowing power to flow through it) when the ignition is first turned on. If the signal from the ignition reference is lost while the engine is running  the logic module cuts power to the ASD, which in turn removes power from the fuel pump, ignition coil, injectors and those parts of the power module.  This causes the engine to shut down. Good luck and hope this helps. 

Jun 29, 2009 | Plymouth Neon Cars & Trucks

1 Answer

1991 dodge dynasty 3.3 litre,,,,,i replaced the fuel pump and the fuel pump relay in the main fuse box next to the air cleaner. im still not getting any power to the fuel pump.all fuses have been checked.....


Buy a repair manual. It will show you how to jump related circuits and show you related components like the oil sending unit. Which if it became faulty it would shut-down the fuel pump. Too much to fuel system to give one correct answer.

Jun 20, 2009 | 1990 Dodge Dynasty

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...