Question about Land Rover LR2

Open Question

Land rover LR2 rear wiper not working - LR2 Land Rover Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Landyman
  • 89 Answers

SOURCE: land rover rear axle

The pinion bearing preload should be 3 Nm on a pull scale with the side shafts removed.

Posted on Dec 14, 2008

Ad
Landyman
  • 89 Answers

SOURCE: windshield wiper motor

The wiper motor is situated under the plastic air intake cover at the bottom of the wind screen.Remove the wiper arms and the clips holding the cover on , replace the wiper motor and operate before putting the wiper arms back to return the motor to it's park position.

Posted on Dec 14, 2008

TORC
  • 53 Answers

SOURCE: 02 land rover windshield wipers

http://carservicemanuals.blogspot.com/2008/06/download-land-rover-discovery-workshop.html

Posted on Mar 30, 2009

SOURCE: 1997 Land Rover Discovery II windshield wiper stop working

It sounds lilke the wipers are just going through the "park routine": one swipe and stop.

The melted part is the end of a wiring harness. But replacing this will not solve the problem. It sounds like you have a bad wiper motor which is pulling too much current and overheating.

There are switches on the wiper motor which probably have burned out and the only one left working is the park switch.

Posted on May 04, 2009

  • 490 Answers

SOURCE: land rover 110 fuse keeps blowing on wipers - is

yes you have a short,a hot wire touching ground or your wiper motor is shorted on the inside

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing exhaust manifold on a 2009 LR2 Land Rover


4 bolts top, 4 bolts bottom, 3 nuts connecting down pipe. 1 exhaust manifold gasket. Spray with PB, soak, remove drop in new exhaust manifold and gasket

Sep 29, 2016 | 2009 Land Rover LR2

1 Answer

How to replace blower motor on 2008 Land rover LR2


most of them can be replaced from under the hood (bonnet) simply by unbolting from the firewall

Aug 02, 2015 | 2008 Land Rover LR2

1 Answer

Can't. Find low side


can you please elucidate a little and resubmit the query, ,

Jun 14, 2015 | 2009 Land Rover LR2

1 Answer

Why want my 2009 land lr2 rover crank


Check for codes

After 34 years of having computers on
vehicles ,you would think folks would check the
battery first,then check for codes

Long learning curve isn't it !

Jul 25, 2014 | 2009 Land Rover LR2

1 Answer

Where is the service port to refill Freon on 2008 LR2?


Located under the plastic cover below the wipers on the passenger side of the car. the other is visible just behind the radiator.

Sep 24, 2013 | 2008 Land Rover LR2

4 Answers

My 2008 Land Rover LR2 HSE key fob won't


So did you fix your problem? I'm now having the same exact problem. The key simply doesn't work; HOWEVER, I know the key is not dead. I also have a 2008 LR2 and there is no "Battery" in the key fob. I compained countless times to the dealer that the key would just stop unlocking doors on me. They told me the battery charges when it is in the ignition but there is no battery to replace. They recommeded I rotate my main and spare key to make sure they're both always charged. Well, I do, and same problem.

This problem started one year ago and I complained that I should not have to spend $500 for them to replace the key... because a 3-year-old key SHOULD NOT be dying. And not to mention, a large chunk of that $500 is for them to "program" the key.

I have an appointment on Friday at a certified Land Rover repair shop but NOT the dealer. The shop I called said the '08 LR2 has "huge key issues." I have had it with Land Rover and their lack of interest in helping deal with the problem, which I might add is clearly THEIR problem, if so many are having similar problems.

I will post an update after my appointment Friday.

May 08, 2012 | 2008 Land Rover LR2

1 Answer

How do I change the battery in the key chain (LR2 model)?


How do I change the key battery in my Land Rover LR2 HSE 2009 model?

Jan 01, 2012 | Land Rover LR2

1 Answer

I need the location for the cabin filter on a 2008 land rover lr2


looked in my bible and i cannot find this number but the later models are all under the passenger side dash behind the glove box but some are showing in the middle of the bulkhead under the wiper mechanism ,hope this helps

Apr 21, 2011 | 2008 Land Rover LR2

1 Answer

How to reset oil service meter 2008 land rover lr2


You need to have it reset by dealer or someone who has OBII scanner (fault scanner) Autozone, Advance & other auto parts stores can do it for you.

Jan 07, 2011 | Land Rover LR2

1 Answer

How to replace LR2 Third Brake Light


The Freelander is Land Rover's entry-level crossover SUV. Unlike other Land Rover vehicles that use a traditional "truck," body-on-frame chassis, the Freelander is built on a unibody, front-wheel drive car chassis. The Freelander is sometimes known in the U.S. as the "LR2."

1 Purchase replacement bulb P21/5W, available at most auto parts stores and at any Land Rover
dealer.

2 Turn off engine and open rear cargo door.

3 Remove the two Torx screws from the side of the tail light assembly. Carefully pull the assembly
away and unplug the electrical harness.

4 Turn the assembly over to access the bulb modules. There are three separate bulb modules; the
top module should be the brake light.

5 Rotate the bulb module counterclockwise to release it from the tail light assembly. Push the bulb
down (into the module) and turn it counterclockwise to remove it from the module.

6 Insert the new bulb into the bulb module. Carefully push the bulb down and turn it clockwise.
Reinsert the bulb module into the tail light assembly and turn it clockwise.

7 Reconnect the electrical harness to the tail light assembly. Remount the tail light assembly and
replace the Torx screws.


Dec 26, 2010 | Land Rover LR2

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...