Question about 1983 Porsche 911

Open Question

Replaced turn signal arm on steering column but signals do not work

Its an sc model

Posted by on

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1983 ranger turn signal lights flash quickly on both sides. Hazard lights work. Steering wheel felt locked and heard a breaking sound that seemed to come from the steering column.


fast flashing usually means a bulb is burnt... have you checked them all ??? or did you wire in a trailer plug and did something wrong ???

Dec 28, 2013 | 1983 Ford Ranger

1 Answer

HELP ME PLEASE!!!!! I replaced my flasher unit, and my signal lights still blink 1-2 times then nothing. My hazards and brake lights work fine. I push the signal arm down and it blinks 1-2 times then...


Have you replaced the relay because there's one of them as well with the flasher unit. I've been having a problem with my hazards not working but turn signals work fine. Maybe the arm on your steering column might be on its way out because they do get used alot.

Sep 20, 2013 | 1999 Ford Expedition

2 Answers

How to replace the turn signal switch in a 1992 Cadilac?


Turn Signal Switch REMOVAL & INSTALLATION CAUTION
Some models covered by this manual may be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column, and instrument panel disable the SRS. Deville, Eldorado, Seville, and Fleetwood - Early Models
  1. Disable the SIR system.
    1. On Deville and Fleetwood, remove the left lower sound insulator. On Eldorado and Seville, remove the left side sound insulator.
    2. Remove the Connector Position Assurance (CPA) and detach the yellow 2-way connector at the base of the steering column.
    3. Remove the steering wheel.
    4. Make sure the ignition switch is in the LOCK position to prevent the SIR coil assembly from going off-center.
  2. Remove the SIR coil assembly retaining ring and the coil assembly. Allow the coil to hang freely. WARNING
    The SIR coil assembly will become off-center if the steering column is separated from the steering gear and is allowed to rotate or if the centering spring is pushed down, letting the hub rotate while the coil is removed from the column.
  3. Remove the wave washer.
  4. Use tool J-23653-C or equivalents, to depress the shaft lock, then remove and discard the shaft lock retaining ring.
  5. Remove the shaft lock.
  6. Remove the turn signal canceling cam assembly.
  7. Remove the upper bearing spring, upper bearing inner race seat and inner race.
  8. Move the turn signal switch to the RIGHT TURN position.
  9. On Deville, Fleetwood, and 1990 Eldorado, and Seville, remove the multi-function turn signal lever as follows:
    1. Make sure the lever is in the OFF position.
    2. Remove the access cover from the steering column housing.
    3. Detach the cruise control wiring connector. Note the position of the connector when installed in the column.
    4. Pull the lever straight out of the turn signal switch.
  10. On Eldorado and Seville, remove the multi-function turn signal lever as follows:
    1. On 1992-93 vehicles, slide the connector cover toward the front of the vehicle.
    2. Unplug the electrical connector. On 1991 vehicles, note the position of the connector when installed in the column.
    3. Push the lever straight in, rotate clockwise 1?4 turn and pull the lever out of the switch.
  11. On Deville, Fleetwood, and Eldorado and Seville, remove the screw, button, spring, and hazard warning switch knob.
  12. On Deville and Fleetwood, remove the one signal switch arm retaining screw. On Eldorado and Seville, remove the 2 signal switch arm retaining screws. Remove the signal switch arm.
  13. Remove the turn signal switch retaining screws.
  14. Remove the wiring protector and detach the turn signal switch connector.
  15. Gently pull the wire harness through the column and remove the turn signal switch. prev.gif next.gif

Nov 12, 2010 | 1992 Cadillac DeVille

2 Answers

I have a 93 Olds Bravada. The multi-function turn signal switch, the whole assembly including the turn signal switch arm needs to be replaced. I was told by one party that this part is non-replaceable and...


I believe yes, you can replace just the switch. You will need to unplug the wire harness to the switch from under the dash/column area and fish it out, and the steering wheel will need to be removed.

Aug 27, 2010 | 1993 Oldsmobile Bravada

1 Answer

Signal turn does not work on 1995 olds achieva; have replaced fuses; cruise control is on the same arm and does not work also


I believe it is the Turn Signal Lever on your steering column. You will need to test it to determine if that is the culprit.

May 28, 2010 | 1995 Oldsmobile Achieva

1 Answer

Just replaced steering column, and turn signals


Do your brake lights work? If not, Check to make sure the brakwiring is connected. Turn signals and brake are electricaly associated. Good Luck, -Ned_

Oct 30, 2009 | 1987 Pontiac Fiero

2 Answers

Brake lights


the switch in the steering column is broken. you will need to replace it. the contacts are separating when signal arm is moved.

Sep 17, 2009 | 1997 Oldsmobile Cutlass Supreme

2 Answers

The turn signal keeps flashing the to the left


It sound to me like it's the switch it's self and not a relay.

Aug 03, 2009 | 1998 Chrysler Sebring

2 Answers

Turn signals won't come on.


I would have to say that it is your turn signal switch in the column. You will have to take the steering column apart and replace it.

Jun 19, 2009 | 1993 Ford Taurus

1 Answer

Turn signals not operating


Your right in your assumption. Same problem for me, signal switch within the Steering column is bad and needs replaced

Aug 02, 2008 | 1991 Oldsmobile 88

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...