Question about 1998 GMC Sierra

Open Question

Where is the control module on a 1998 gmc sierra 2500 5.7L

LOOKING FOR THE LOCATION OF THE CONTROL MODULE

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 134 Answers

SOURCE: where do I find ignition control module on a 97

It is right beside the coil on top of the engine passenger side. It is a little black box with 4 pin connecter on it. email me russalm900@hotmail.com with your problems. May not be the ign control module i just played with the same truck and it was a different problem. I bought the ign module $180 for no reason. Let me know what ya got... Hope this helps

Posted on Oct 28, 2009

  • 1608 Answers

SOURCE: cruise control stopped working on my 93 sierra

The only other thing that is the turn signal handle.This is the switch.It can be removed by making sure it is in the off position and pull straight out.Depending on which kind of handle it is.The wire connector is either right by the area where you pull it out or under the dash.Just follow the wire.Hope this helps.Good luck.

Posted on Dec 18, 2009

  • 1024 Answers

SOURCE: Needing to know what a BCM(Body Control Module) does.

it control warning
door locks
lights
alarm

Posted on Mar 10, 2010

DillyWackSac
  • 195 Answers

SOURCE: my 2002 GMC Sierra blower/A/C keeps running even

If the Blower is staying on high maximum blow then it is probably the a/c blower relay. The other thing it could be if not on maximum is the blower motor resistor pack. Lastly would be the blower switch shorted to power.

Posted on Oct 10, 2010

timsauto123
  • 750 Answers

SOURCE: 1998 jimmy....climate control system not

check the blender acuator,sound like it's not moving back and forth.under the dash.











TIM......

Posted on Oct 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is control module located on 2003 gmc sierra 6.6 sle


you are looking for the body control module. it is located on the drivers side under the dash

Feb 12, 2013 | Cars & Trucks

1 Answer

Vehicle location of transfer case control module on 1996 GMC Jimmy


More likely worn out bearings which are periodically seizing - have you checked the PS pump with the belt off? You should also check the other devices run by the belt for bearing trouble, particularly the idler pulley. Periodic seizing problems with worn bearings on any of these can cause the truck to stall and the low pressure signal.

Jun 10, 2017 | 1999 GMC Jimmy

1 Answer

Where is the transfer case control module on 98 gmc sierra


It is located under the passenger side kick panel. Remove the plastic kick panel cover to reveal the TCCM.

Nov 02, 2012 | 1998 GMC Sierra

1 Answer

Where is the A/C module located on a 2000 GMC Sierra?


hvac control module is in the center of the dash under the radio

Mar 02, 2011 | 2000 GMC Sierra

1 Answer

My gmc truck will not start up. It just constantly turns over and does not attempt to start.


ignition control module could be your problem, take the control
module to local auto parts to test.

Sep 28, 2010 | 1999 GMC Sierra

1 Answer

Were is the shift module located at on a 1993 gmc sierra


Shift module? Are you talking about a control for the transmission? The Engine computer controls the transmission. What kind of problem do you have? I can likely help.

Aug 07, 2010 | 1993 GMC Sierra

1 Answer

1999 gmc sierra wipers will only run on high. Any idea why?


The wiper motor control module needs replacing. On some models you can replace the "pulse board". On some you must replace the wiper control module which mounts directly to the windshield wiper motor. This is a very common GM problem.

Jan 19, 2010 | 1997 GMC Sierra

1 Answer

Location of transfer case control module


Under the drivers side dash......it is facing towards the driver so the connectors can be reached. The module just pops out.

Jan 11, 2010 | 2003 GMC Sierra

1 Answer

Where do I find ignition control module on a 97 GMC Sierra


It is right beside the coil on top of the engine passenger side. It is a little black box with 4 pin connecter on it. email me russalm900@hotmail.com with your problems. May not be the ign control module i just played with the same truck and it was a different problem. I bought the ign module $180 for no reason. Let me know what ya got... Hope this helps

Oct 27, 2009 | 1997 GMC Sierra

Not finding what you are looking for?
1998 GMC Sierra Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...