Question about 2004 Jeep Grand Cherokee

1 Answer

4x4 won;t unlock

Tried what the manual tells ya but still won;t , have to keep it in part time 4x4 , any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Start the vehicle, shift transmission to nuetral. then move the 4x4 shifter to the 2wd position. then shift the transmission into reverse and back up a few feet straight, then drive forwards. it should be out of 4x4.

Posted on Jan 13, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

G'day my courier is a 4x4 my light on my 4x4 light is flashing on and off is it just a senser can't tell if in 4x4 mode or not just keeps blinking the whole time

Refer to owners manual and video under troubleshooting if that does not work almost all auto part stores have hand held computers to check your sensor which they will give you a print out telling you the possibilities if its always done this it could just be telling you that the 4x4 is engaged

Mar 17, 2016 | Cars & Trucks

1 Answer

01 Isuzu Trooper 3.5L V6 Manual 4x4

The answer to all your questions is, no we can not, because
this is a chat room only,we are at home like you & use the
internet as you can,no one is at fix ya answering questions
Just a social web site,something to do

You need the shop that worked on it, to continue on

They should have keep it & gotten the required reference
material your asking for here,wiring diagrams & such

Your asking for a info that shops pay for by subcription or
we pay hundreds for the factory manuals to work on our

Also only the proper testing will uncover a vehicle fault

There is no guessing or someone had the same problem
Every job is a fresh start regardless

Again the shops people go to should have the material to
become familiar with the vehicle before any work or testing
starts,no one knows it all

As a customer you do not need to help them or give them
any materials,parts numbers etc, that is their job & why your
paying them

Mar 19, 2014 | Cars & Trucks

1 Answer

Alarm won't shut off on 1999 Chevy blazer 4x4

Is it factory alarm or aftermarket??. Try using the key to lock and unlock the doors driver and passenger then turn the ingnition on with the key and leave it in the key on engine off position for a few minutes and start the vehicle

Oct 14, 2012 | Cars & Trucks

1 Answer

The 4 wheel drive

well turn the hubs to lock if it is manual. or if auto hubs leave alone. then push button to 4x4. if its push button. if it doesnt light up then ya have a problem with the 4x4 and i can help you through that if need be.

Feb 14, 2009 | 1992 Ford Explorer

4 Answers

How do you know when your in A4WD?

no you have it reversed....if the light is on its in awd if its off its not

Feb 14, 2009 | 2006 Ford Expedition

1 Answer

4x4 malfunctioning

some times the truck has to be put in the opisite direction the for wheel drive was driven in last. so if ya were going forward and you have auto locking hubs then you need to drive irt backwards till lights go out. and if you have driven a long way with it like that then you might have to back up far but it should unlock those hubs. if not then on transfer case there is a small motor that engages and you will need to remove that motor and manually move selector to 2h.

Feb 05, 2009 | 2000 Ford Excursion

2 Answers

New to 4x4

Best way to engage 4x4 that I've found is to keep the vehicle rolling at 15-30mph and just engage 4 high. Generally, you don't need 4low unless in extreme conditions (pulling stuff etc) It gets about as much use as driving in 1st gear with a passenger car with auto trans! When disengaging, do the same... generally does not disengage for a few yards, but it will eventually! There is usually a brief summary on inside of sun visor. you can usually find a owners manual in scrap yards, if they let you check glove boxes.Unless you buy a shop manual, if you have ever driven anything, there is pretty limited info in them, but still a good "quick reference" for simple stuff.

Dec 26, 2008 | 1989 Jeep Cherokee

1 Answer

Will not engage into 4wheel drive

Start Vehicle with engine running push on BRAKE and with feet firmly on brake put vehicle in NEUTRAL. Keeping foot on brake try to engage 4x4 should work. If I fixed-ya leave ma FIX-YA comment thanks

Dec 19, 2008 | 1995 Kia Sportage

2 Answers

03 f250 w/6.0 4x4

Sounds like a problem with the elctronics to me?

Oct 02, 2008 | 2003 Ford F250 Super Duty Crew Cab

3 Answers

Electric push button 4x4 transfer case

I work for a GMC dealership....and I have an 03 sierra with auto 4x4 and i work on these every day....and im not seeing this common problem ur talking about.....sounds like its the mode switch or the tccm.....would need more info to diagnose

May 16, 2008 | 2003 GMC Sierra

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

Related Topics:

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides