Question about Cars & Trucks

Open Question

My wheel balance coats 850 gift me an error 3

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does error code 2 mean on my hunter dsp wheel balancer


Call hunter support and request error code sheet. Let them know you are a end user and your machine is out of warranty. They should email or fax it to you.

Oct 20, 2014 | Cars & Trucks

1 Answer

Electrical Board Wiring diagram for coats 850 balancer


This was all I could find:

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CC8QFjAA&url=http%3A%2F%2Fwww.nytechsupply.com%2Fdownloads%2Fwheel_balancer_operation_manual%2FCoats_850_Operation_Manual.pdf&ei=omHAUczML-fE0QHqooHACg&usg=AFQjCNEm9EqJ9mDHaXPRhXNbfvweNtaDaw&sig2=UrkSObN8BHVH-GWyVUG0ZQ

Jun 18, 2013 | Cars & Trucks

1 Answer

No compression on 3 cylinders. I think it's the timing belt. Does it have a interference engine or not?


Hi,
you certainly have a problem. There were only a few manufacturers fitting 'free-wheeling' engines. I believe the Chrysler Acclaim series were the last to do so. Volvo 850 were not members of that club.

Jan 25, 2011 | 1995 Volvo 850

1 Answer

Bad vibration tends to go away when vehicle reaches 40 + mph.


jere are a list of potential causes of your problem
1-wheel balance
2-bad tire
3-need alignment
4-worn shock
5-worn suspension components

wheel balance is the cheapest repair

Good luck

Oct 05, 2010 | 2006 Ford Escape

2 Answers

WHY DOES MY FRONT RIGHT TIRE SIDE VIBRATE ON MY 2004 YUKON


Tire vibration can be caused by a few things. Here's what to check:
1. Check the tire inflation. Make sure it's at the recommended pressure.
2. Have a local tire shop check your tire balance. If a tire is out of balance you'll notice the vibration at speeds above 50mph.
3.Wheel alignment. If the alignment is out, the tire will show uneven wear and can cause vibration also.
4. If a front wheel bearing is going out, it can cause vibration, but since your car is only 5-6 years old, this probably isn't the case.
Hope this helps you narrow it down.
Best of success!

Mar 04, 2010 | 2006 GMC Yukon

2 Answers

HI I HAVE A 01 FORD EXPEDITION AND ABOUT 3 MONTHS AGO IT STARTED TO SHAKE A LITTLE WHEN IM GOING ABOUT 50MPH AND ITS LIKE WELL IM NOT A MECHANIC BUT ITS LIKE THE INJECTORS WERE DIRTY. OR SOMETHING WAS...


Sounds like a wheel balance problem. If there's no instability in the steering at speed (wandering, cutting) meaning you don't have to keep correcting it to stay on the road, its most likely tire balance. Check your wheels for packed mud, bent rims or tire belts that have seperated. The way to tell this is to look at the sidewalls for concave spots. This is where there will be a broken belt. This will create balance problems. If none of these exist take it to a tire shop and have them check the balance. The shop that installed the tires will usually do this for free.

Feb 08, 2010 | 2001 Ford Expedition

1 Answer

My daughter want to change her Scion alloy mag


That's definitely possible.

She'll need to thoroughly wash the wheel.
Then she'll need to sand the wheel down using 120 to 320 grit sandpaper in order to remove the gloss from the current finish and prepare it for primer. If your wheels are chrome, you need to get below the glossy surface to the dull finish below. Use 600 grit sandpaper to smooth out the the rim.
Then use a rag to remove the remaining dust.

If the tire is still on the wheel, tape and cover up the tire.

Lay the rim down on a flat surface in a well ventilated area and spray 2 to 3 coats of primer

Once it dries, gently sand it again with 600 grit sandpaper to to smooth it out again. use a rag to remove the excess dust.

Then spray 2 to 3 coats of the paint that she wants. and let dry.
Sand again to remove any runs in the paint.

Then spray 2 to 3 coats of clear coat. sand with 1000 to 1500 to remove any burrs. Then use a polishing agent to bring the shine back


Sep 22, 2009 | Scion TC Cars & Trucks

2 Answers

Car vibrates at idle.


you may have a pulley out of balance. ie harmonic balancer, steering pump, alternator. try increasing idle, set it at 850-900.

Oct 28, 2008 | 1992 Honda Accord

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...