Question about Chrysler Aspen
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There should only be two bolts on the back of the caliper holding it into the knuckle. Removing those two bolts should free the caliper. In fact I believe they're 12 or 13 millimeter bolts.
Posted on May 16, 2008
There may be one that is "hiding" from you. I think that there are normally 3 that you have to take the nuts off of thru the back hatch. You may have to tug a little harder>
Posted on Mar 12, 2010
use a 14mm wrench or socket to remove the caliper bolts/slides. remove caliper. note how old pads came off, match the new pads with same location of old pads ( check for hardware or indicator location). press the caliper piston in . the correct way is to use a caliper press, apply a little pressure to piston, open bleeder screw, press piston all the way in, tighten bleeder. (or grab a 'c' clamp and slowly push the piston in. i would recommend having the rotors machined to for proper wear and to eliminate vibration. for this remove 2 17mm bolts holding caliper bracket on and rotor will slide off.
Posted on Apr 30, 2010
Tips for a great answer:
Sep 29, 2014 | Chrysler Aspen Cars & Trucks
Mar 24, 2014 | 2007 Chrysler Aspen 4x2
Sep 20, 2012 | 2007 Chrysler Aspen 4x2
Jul 31, 2012 | 2007 Chrysler Aspen 4x2
Apr 12, 2012 | 2007 Chrysler Aspen 4x2
Jan 21, 2011 | 2007 Chrysler Aspen 4x2
Sep 19, 2010 | 2007 Chrysler Aspen 4x2
Sep 11, 2010 | 2007 Chrysler Aspen 4x2
Mar 12, 2010 | 2007 Chrysler Aspen 4x2
May 17, 2009 | 2007 Chrysler Aspen 4x2
Nov 15, 2017 | Chrysler Cars & Trucks
117 people viewed this question
Usually answered in minutes!