Question about 1992 Nissan Pickup

1 Answer

92 Nissan pickup is stuck in nuetral

I can still shift gears. The clutch isnt stuck on the floor. When in a gear and clutch released the truck does not stall. The hydrualic fuel is fine.

I smelt a burning for about a week and thought it was my brakes. Now I believe it was the clutch. Burning didnt start untill I had to keep it in 4wd over winter.

Any ideas would be great if it will save me from replacing the clutch

-Thanks Tyson

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

I have the same problem with my truck at the moment the problem is that your clutch is burnt up. you will need to replace the entire thing. you will have to buy a clutch kit and u joints and maybe a flywheel. its about $200-300 but this website offers free shipping

http://www.clutchcityonline.com/nissan_pickup_24.htm


good luck and dont do donuts that what happend to mine

Posted on Jan 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hot to fix a clutch that goes all the way to the floor


Check your clutch master cylinder's fluid,it's located under hood in right corner,if low or empty,then your slave cylinder is bad and leaking,it's connected to side of transmission.Here's a link. Repair Guides Clutch Clutch Release Cylinder AutoZone com Here's the part. Duralast Clutch Slave Cylinder 12425 1992 Nissan Datsun D21 Truck 2WD 4...

Jan 14, 2014 | 1992 Nissan Pickup

1 Answer

91 integra stich shift stuck in nuetral


Without more info id have to say its the clutch being when the clutch is depressed it releases the clutch from the flywheel disengaging the engine from transmission allowing you to select gears.
it is about an 8 hour process to replace a clutch if you know what your doing.

Sep 07, 2013 | Acura Integra Cars & Trucks

2 Answers

Clutch go's all the way to floor with no resistents can not shift gears engine won't stay on. 1987 5 speed pickup truck


Sounds like the hydraulic fluid may have leaked out of a line or the slave cylinder is leaking, or the master clutch cylinder has an internal leak that doesn't actuate the clutch effectively when the pedal is pushed to the floor.

Oct 28, 2010 | 1987 Nissan Pickup

1 Answer

1986 Nissan Pickup


Shift fork may also be one of the reason! watch the shift fork while moving the clutch in and out.
1)The shift fork is near the clutch master cylinder on the tranmission housing. you should now move the fork left and right while the clutch is moved in and out. 2)From your query, it sounds to me that your clutch is not engaging and disengaging completely. 3) This is due to the air block. Make a bleeding process to blow the air out! 4)A broken shift fork will also prohibit the clutch from engaging/disengaging.

May 10, 2010 | 1986 Nissan Pickup 4WD 1986

2 Answers

Wont shift into gear


Was the fluid low? Does the pedal have any resistance? does it feel normal? Did it happen all of a sudden? Does it shift into gear with the engine off? You say it doesnt shift into gear, but does the shifter move into gear or not? Or it does and the truck wont move? Sounds like maybe the SLAVE CYL isnt operating? leaking? theres more questions to answer.

Dec 30, 2009 | 1988 Toyota Pickup

1 Answer

1988 Nissan 300zx shifts real hard or not at all


you may have a weak clutch master cylinder

May 06, 2009 | 1987 Nissan 300ZX

1 Answer

Nissan clutch problem


If your not able to shift into any gear that means your clutch is not engage/disengaging. Check for fluid leaks, you said topped off and fluid levels were low? It sounds like you have a Slave cylinder or master cylinder leak, if its leaking its bet to replace both.

Apr 27, 2009 | Nissan Sentra Cars & Trucks

1 Answer

92 paseo 5 speed manual will only shift when car is not running


sounds like the clutch isnt engaging at all...is there a different sound in engine rpm when car is at idle and the clutch is pressed and released? Check clutch cable.

Dec 05, 2008 | 1993 Toyota Paseo

Not finding what you are looking for?
1992 Nissan Pickup Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...