Question about 2007 Suzuki Forenza Sedan

Open Question

Turn signal flasher location on 2006 suzuki forenza

Turn signals and flashers not working

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 140 Answers

SOURCE: I CAN'T FIND THE TURN SIGNAL FLASHER ON A 1994 SUZUKI SIDEKICK

IF YOU CAN FIND THE FUSE BOX, ITS LOOK LIKE A LITTLE METAL ROUND CIRCLE PEACE,IF YOU PULL IT OUT IT LOOKS LIKE A FUSE ON THE END THAT GOES INTO THE FUSE BOX.. IF ITS NOT IN THE FUSE YOU CAN CALL ANY PARTS STORE AND THEY CAN GIVE YOU A LOCATE ON THE FLASHER..THANKS AND GOOD LUCK..KEITH..

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2007 turn signal flasher location for 2007 sx4


I'd be checking the fuses first. The turn signal flasher should be in the inside fuse panel.

Feb 08, 2017 | 2007 Suzuki SX4

2 Answers

How to fix the turn signals on my ford exposition


exposition ? Do you mean expedition ? What year ? The turn signal switch could be bad , bad fuse , turn signal flasher would be a likely culprit . hazard light flasher is different from turn signal flasher .

Mar 16, 2016 | Ford Cars & Trucks

1 Answer

TROUBLESHOOT TURN SIGNAL


try the hazard lights. if they work check the bulbs with them working. if good and the turn signals not working then it could be the signal flasher is bad. witch out the hazard flasher for the signal flasher it they work then replace flasher, or the turn signal switch it bad.

Sep 05, 2015 | Cars & Trucks

1 Answer

Turn signal flasher relay location in


Turn the switch on to power the signalstat/flasher,listen for the ticking sound(have signal on for the side that works)and figure about where the sound's coming from(will be just under dash about the knees when sitting in seat)then stick your hand under there.You will feel the flasher ticking.Pull it down and replace it.

Apr 15, 2014 | Chevrolet Equinox Cars & Trucks

1 Answer

What's your problmy turn signal light and hazard lights went out on my 2007 suzuki forenza fuses are still good em?


The Hazards and flashers both work off the same "combination relay, it is defective, replace it.

Feb 08, 2012 | 2007 Suzuki Forenza Sedan

1 Answer

Can not locate turn signal flasher unit. located hazard flasher but turn signal flasher is not on the same block even though the block is labeled for the turn signal flasher.


usually the one flasher serves both turn signal & hazard flasher, if either one isn't working you may have other problems.....hope this helps.....cheers.

Jun 27, 2011 | 1989 Plymouth Acclaim

1 Answer

Turn signals were working...but blinking fast. now they don't work at all...replaced fuse in side panel near door and still nothing. Everything else works..headlights, wipers, hazards..what gives?


you have a separate flasher for the turn signals.this is what your problem sounds like.if all your lights are working including the signal indicator on the dash then it will be the signal flasher.if you turn on the hazard flashers and locate it under the dash, this will show you what the turn signal flasher will look like.then you will have to look for the flasher unit on the fuse panel that looks like the hazard flasher.replace the turn signal flasher and you will have your signal flashers again

Mar 08, 2011 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Turn signal doesn't work. Is there a known problem?


If the front and back signal light do not work,but the flasher on your cluster works then STEP 1:turn signal switch on,check for current at the fuse,if power at this point then problem is after fuse.STEP2:if power at fuse check for power and ground at the light bulb harnes.(make sure light bulbs are not burned out by testing them with the unit that works by switching them)

Jan 22, 2011 | 2006 Suzuki Forenza

Not finding what you are looking for?
2007 Suzuki Forenza Sedan Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...