Question about 1992 Honda Accord
When i get on the accelerator its shifts just fine but when im just cruising along it acts like it dont know when to shift? does my light not work at all and it should be blinking idk. please help
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 92 Honda Accord
Blinking light means there is a trouble code.There is a procedure to manually pull codes from the computer.Have the codes checked,have them written down.It could be just shift solenoids,or could even be something more serious,but thats the starting point.
Posted on Jul 09, 2008
SOURCE: 92 Accord Automatic shifting
Has anyone change the transmission fluid and used anything other than Honda ATF-Z1. If so, have the fluid/filter changed in this car and use only Honda Fluid. This is the only fluid that you can use in a Honda. Even if you have used the correct fluid an fluid/filter change may help. If that is not the case then I suggest you seek out a trusted professional.
Posted on Aug 08, 2009
SOURCE: d4 blinking 1995 honda accord
This is involved. When the D4 light blinks, it is indicating a problem with the input or output systems for the A/T. If you find your Service Check Connector (it should be near or at the top of the kick panel on the passenger's side; it's usually blue and has two holes in it; it is at the end of a wire so don't look for a fixed unit; it is often simply tucked in behind the top of the kick panel. You should pull the kick panel out to find it) you can insert a paper clip so that it connects the two holes. Then, if you turn your ignition to ON II (do not start the car) the D4 light will blink out a code, using both long and short blinks. The blinks have to be carefully counted. Problem codes 1 through 9 care indicated by short blinks. Problem codes 10 through 15 are indicated by a series of long and short blinks (you have to add them together to get the code).
I tell you all this to indicate that the procedure is fairly involved, and since you probably don't have a list of what the codes mean, I would have to say that it would be best to find, if you can, a Honda dealer to read the codes and check your transmission. Most of these problems are connector or sensor related and are usually indicated by the transmission not shifting from one gear to another, or by the transmission jerking hard when it shifts. If your having no problems and you are in a position to not have access to a Honda service department, you can find the backup radio fuse in your engine compartment fuse box and take it out(not with the car running) for 10 seconds or so, then put it back. It will clear the computer. If the D4 starts blinking again, it would indicate that the warning was not just a glitch.
I really hope that this is helpful; I'm sorry if it is only disheartening.
Posted on Oct 29, 2009
Testimonial: "thank you much, ill do that, i hope i can follow that . God bless you. ill keep in touch , maraming salamat."
Tips for a great answer:
May 23, 2015 | 1992 Honda Accord
May 10, 2011 | 1992 Honda Accord
Jan 05, 2011 | 1992 Honda Accord
Oct 27, 2010 | 1992 Honda Accord
Aug 21, 2010 | 1992 Honda Accord
Jun 15, 2010 | 1992 Honda Accord
Feb 27, 2010 | 1992 Honda Accord
May 29, 2009 | 1992 Honda Accord
May 20, 2009 | 1992 Honda Accord
Aug 09, 2008 | 1995 Honda Accord
19 people viewed this question
Usually answered in minutes!