Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Find the screws in the inside door handle, remove the handle and disconnect the relay rod(s).
Remove the screws under the armrest.
Starting at the lower outer (rear) corner, carefully pry the panell off popping each "clip" out of its socket while leaving each clip attached to the panell.
Then lift the panell up to release the upper most edge where it wraps over the top of the door body and presses the weathestrip against the glass.
Carefully disconnect any wiring atached to the panell.
Posted on Jul 07, 2009
If you can get a trim removel tool it helps to keep from breaking the
clips. Next, it is just a matter of taking out all the phillips screws.
There is one in the handle area, under the little center cover. There
is one at the front of the door panel and another under the electrical
switch. Once all the screws are out the clips still hold the panel on
and that is where the trim removal tool helps. It looks like a flat
tool with a recess to get around both sided of the clip. You just slide
it in and pry out and that way the clip or door panel does not get
I like to have a helper so when the panel comes all the way off you have someone to hold it whild you remove the connectors to the wiring. Also, when you get all the clips off you will need to lift up to get the panel off the window ledge.
Two screws under the handle mine is snapped off.
Remove the door panel, disconnect the linkage to the handle and remove 2 screws that hold the Handle on.
Hope this help.
Posted on Mar 31, 2010
remove screw and bolts holding your trimboards to its door panel using screw drivers covered its tip with masking tape to avoid damaging the trimboards upholstery and simply lift off the trim panel which light in construction.
Posted on Apr 07, 2010
Tips for a great answer:
May 01, 2017 | Nissan Cars & Trucks
Mar 27, 2015 | 2008 Nissan Pathfinder
Sep 08, 2014 | 2006 Nissan Pathfinder
Jul 22, 2010 | 1995 Nissan Pickup
Apr 07, 2010 | 1993 Nissan Pathfinder
Feb 26, 2010 | 1994 Nissan Pathfinder
Nov 08, 2009 | 2001 Nissan Pathfinder
Sep 16, 2009 | 1991 Nissan Pathfinder
Jul 07, 2009 | 1995 Nissan Pathfinder
May 05, 2009 | 1990 Nissan Pathfinder
17 people viewed this question
Usually answered in minutes!