Question about 2005 Hyundai Terracan 2.9
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi, this warning light is either telling you the water level is low or the temp is to high.
If this light comes on as soon as the ignition is switched on then its more than likely low water level or it could be that the sensor itself as give up working, these are not that expensive to buy but check your water level first and top up if needed.
If the light comes on after you have been driving for a while then this is telling you it is getting to hot which usually means the thermostat needs replacing.
Any of these problem shouldnt cost to much to repair as their are plenty of parts available so will be cheap and easy to get.
Hope this is some help to you if you have any problems or questions then give me a shout back.
As for driving 300 miles then if the light comes on as soon as you start the car then you should be ok but if it comes on after the car has been driven then it could over heat and this can cause the head gasket to blow and then this mean very expensive repair. So if this is the case then when the light comes on its best you switch of and rest for 30min to get the temperature down. If the lights on as soon as you start the car then you should find you will be ok.
Posted on May 20, 2008
go to this link and then follow instructions from that page to Hyundai site for PDF download.
Posted on Apr 22, 2009
SOURCE: warning light
Usualy the check engine light reports a malfuction in your engine performance system, it coulb be a misfire, bad sensors, vaccum leak, you need to have your engine code read from a garage or an auto parts store that offers the service for free.
Posted on Apr 29, 2009
the solution is simple,
you only need to undo the screw on top of the side light/indicator. then facing the head light place a flat headed screw driver under the bottom lip of side light. the bottom of the lihgt is on a small push fit stud, use a sponge or cloth to protect your bumper paint work then just apply pressure gently to lever side light out towards you, It will come dont worry, you may then change your bulbs if you wish remove the whole light unit you will see the bottom bolt as soon as you release the side light. to replace just push back into place then replace screw. whole job takes about five minutes
hope this helps kevan hildred
Posted on Jan 28, 2010
Tips for a great answer:
Jan 14, 2016 | 2005 Hyundai Terracan 3.5
Aug 09, 2013 | 2005 Aston Martin DB9
Dec 28, 2012 | 2005 Hyundai Terracan 2.9
Dec 08, 2012 | 2006 Hyundai Terracan 2.9
Aug 15, 2012 | 2005 Ford Five Hundred
Apr 06, 2012 | Cars & Trucks
Sep 29, 2010 | 2005 Chevrolet TrailBlazer
May 02, 2009 | 2005 Suzuki Forenza
Oct 13, 2016 | 2005 Hyundai Terracan 2.9
Aug 04, 2014 | 2005 Hyundai Terracan 2.9
279 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: