Question about 2001 Ford Escort ZX2

Open Question

Removing center console on 2001 ford escort - 2001 Ford Escort ZX2

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 321 Answers

SOURCE: transmission problem with 2001 Ford Escort

Sounds like a problem with the shift interlock.Here's how it works:You put your foot on the brake pedal,the brake pedal switch sends voltage to a solenoid mounted on your shifter.The solenoid unlocks the shifter,and you remove it from Park.When the interlock doesnt work,it's usually the interlock solenoid mounted on the shifter malfunctioning,however the brake pedal switch,or wires to and from can also be at fault.

Posted on Jul 11, 2008

Ad
alicantecoli
  • 22219 Answers

SOURCE: timing belt diagram for 2001 ford escort zx2 dohc

cam shaft timing marks on back of cams ,two slots ,use a flat piece of metal to align .remove no1 spark plug and drop long thin screwdriver down it to bring piston just below tdc,then align cams so both cams are on the rock (valves closed) with knob on back cam aligning with pick up sensor left side between lobes.then bring piston up to tdc and fit belt.turn engine over twice with socket on bottom pulley to make sure no valves clear pistons.Remember to remove flat edge from back of cams i didnt last time and bent my home made tool

Posted on Jan 28, 2009

  • 1 Answer

SOURCE: removinf tentioner on 2001 ford escort

i found the only way is from the bottom of car.there is a plastic sheild under car held on with 10mm bolts.remover the cover and acess to the tensioner is made alot easier

Posted on Apr 03, 2009

harley9701ha
  • 424 Answers

SOURCE: 2001 FORD FOCUS SHIFTER CABLE SNAPED

You did not need to remove the heater box to replace the cable. There is a hole in the floor the cable passes through.

Posted on Nov 16, 2009

wracefans24
  • 1985 Answers

SOURCE: need serpentine routing diagram for 2001 ford escort zx2

if there is no white label on top of the radiator guard,
If you buy your belt from Autozone the belt routing is on the package,If you already bought the belt you could always buy one from AutoZone and then return it after you use the routing.

Posted on Jan 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1984 Ford escort 1.6L..where is the ecm located..


The ECU is located in front of the center console under the radio, remove the center console side panels to access it.

Feb 02, 2017 | Ford Cars & Trucks

1 Answer

Where is the power control module on a 1997 ford escort wagon?


PCM / ECU is located in front of the center console.
Remove center console: 
Remove plastic retaining plugs on each side of front of console use a very small screwdriverto lift the center plug.
Move front seats all the way forwarding and remove two back screws on the back part of the console. 
Lift up the front end of the rear part of console and remove two screws that hold down the front part of console, rear of shifter.
Before you can remove the front part of the console the gear shifter must be moved from out of park position, if your car is an automatic. Note: If the battery is disconnected you will need to use the emergency access portin the top of the console. Remove a small cover plug and insert a small screwdriver or ink peninto the hold to release the shift lever out of park. With the shift lever out of the way the console can be removed. 

Jun 14, 2015 | 1997 Ford Escort

4 Answers

What is and where is the pcm on a 2.0 ford escort engine


The Powertrain Control Module (PCM) detects the engine operating and driving conditions, along with the exhaust gas oxygen content. Various switches, sensors and components provide the PCM with information which allows it to control the air/fuel ratio (mixture), emissions and drivability.

To get to the PCM you would have to remove the parking brake and shift consoles and then the gearshift knob and and boot...I know, GREAT place to put a part needing to be serviced!

Jul 05, 2014 | 1998 Ford Escort

1 Answer

Need to know how to adjust e brake on 2001 ford escort ZX2


Under the center console next to the emergency brake lever is an adjusent bolt use a 10 deep well socket to tighten up

Dec 18, 2010 | 2001 Ford Escort ZX2

1 Answer

Cannot find belt tensioner on 2001 ford escort


  • Locate the serpentine belt tensioner on the front of the engine. The belt tensioner on the 2001 Ford Escort is located directly under the power steering pump and above the air conditioner pump. The belt tensioner has a 17 mm bolt head in the center of the pulley.






  • Nov 20, 2010 | 2001 Ford Escort ZX2

    1 Answer

    How do you replace the water pump on a 2001 Ford Escort ZX2?


    hello there:
    to replace you're water pump you will have too also do the timing belt the water pump is going to be internal you will have to remove the timing cover and remove the wheel splash guard and left front tire to be able to get to cover you will also need to remove the drive belt accessory belt the alternator possible the a/c pump and make sure you have go the number 1 cylinder top dead center on the exhaust stroke and remove the harmonic balancer to get in to the pump then you will have the do believe eight bolts to remove the water pump install in reverse.....hope this helps you out...sincerely D.Jones

    Jun 01, 2010 | 2001 Ford Escort ZX2

    1 Answer

    2001 Escort ZX2: it wont go out of park...


    There is a safety lock-out that keeps you from taking the car out of gear if you don't push the brake. If your brake lights still work then the switch is good. Also, some people have reported that if the high mount brake light is bad it will keep the car from being shifted out of park. If all of your brake lights work then the solenoid is bad. Remove the center console to get to the solenoid. Since the solenoid is expensive most people just zip-tie the solenoid open so that you don't have to push the brake to shift it from park.

    May 16, 2010 | 2001 Ford Escort ZX2

    1 Answer

    What would cause the switch in the center console to not allow the car to be put in gear


    A shift solenoid is in the console. That solenoid operates upon when your foot depresses the brake pedal to shift

    Mar 19, 2010 | 2001 Ford Escort ZX2

    1 Answer

    Need 2001 ford escort zx2 DOHC engine information, belt diagrams


    The tensioner is between the a/c compressor and crank pulley, below the power steering pump. Use a 13 mm wrench to 'tighten' the bolt in the center of the pulley and it'll move to release tension off the belt.

    Jan 25, 2010 | 2001 Ford Escort ZX2

    1 Answer

    Removinf tentioner on 2001 ford escort


    i found the only way is from the bottom of car.there is a plastic sheild under car held on with 10mm bolts.remover the cover and acess to the tensioner is made alot easier

    Apr 01, 2009 | 2001 Ford Escort ZX2

    Not finding what you are looking for?
    2001 Ford Escort ZX2 Logo

    Related Topics:

    72 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    fordexpert

    Level 3 Expert

    5537 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...