Question about 2002 Toyota Camry

2 Answers

2002 toyota camry engine knocking - 2002 Toyota Camry

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My probox car knocking after 3/4 miles

Posted on Apr 21, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,961 Answers

A light knock at the top of the engine, or ticking, is the valve gear. This is not a worry if it eases when the engine is hot.
A heavier knock down lower indicates trouble with the engine bearings, and this will usually get louder as the engine becomes hot.
These problems have arisen in Camrys due to engine oil sludging. This starves the bearings of oil and they wear quickly. Toyota says it affects engines up to a 2001 build, but I have heard of 2002 engines being affected as well. Toyota insists it is due to owner neglect, but they have taken it on in limited circumstances:

http://www.autosafety.org/toyota-broadens-sludge-repair-program

A light rattling sound when the engine is under load indicates you should try a fuel with higher octane rating, although this would be unusual in your model unless you are using a fuel with high ethanol.

Posted on Dec 09, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Need to locate knock sensor on 1999 camry V6. Where is located.

i have toyota windom 4vz-fe i need locate knock sensor

Posted on Aug 15, 2009

  • 1861 Answers

SOURCE: DRIVE BELT ON 2002 TOYOTA CAMRY

If you are referring to the vehicle having a "Timing Belt", no, it does not have one.
The 2002 Camry 4 cylinder has a Timing CHAIN, and does not need to be replaced.

Posted on Oct 29, 2008

  • 25 Answers

SOURCE: FACTORY ALARM CAMRY TOYOTA 2002 WENT OFF WHEN i WAS DRIVING

If your remote is attached to the key in the ignition, it could have been bumped setting off the alarm. It is also possible for the lock button to be depressed and lock the doors, if you do not notice this and get out of the car........!

Posted on Jan 15, 2009

mkv0525
  • 358 Answers

SOURCE: Problem with toyota camry knock sensor switch

ther are two, they are located below the intake manifold. not for the weekend guy.cost very from dealership to aftermarket.

Posted on May 20, 2009

  • 1 Answer

SOURCE: 2002 Toyota Camry 4 cyl has a check engine light

anyone knows the solution for Camry Engine code 440. I reset at half tank of gas & then filled upo the tank. Engine Light came back exactly on half tank again.

Posted on Feb 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the crank sensor located on a 06 toyota highlander


images for Where is the crank sensor located on a 06 .

How To Install Replace Crankshaft Position Sensor Toyota ...

? 6:58
https://www.youtube.com/watch?v=M6zU6jh8pNc
Jan 24, 2011 - Uploaded by 1A Auto Parts
How To Install Replace Crankshaft Position Sensor ToyotaCamry 3.0L V6 1AAuto.com ... the crankshaft position sensoron a 1994 Toyota Camry 3.0L V6. ..... 2002-2006 LEXUS ES300 ES330 TOYOTA CAMRY KNOCK ...

Dec 05, 2015 | Toyota Cars & Trucks

1 Answer

Where is my knocking sensor wires located at in a 1995 Toyota Camry LE V6 3.0


knock sensors on v engines are on the insides of the cylinders in the v
the wires and harness will run down the v of the engine

Sep 08, 2015 | 1995 Toyota Camry

2 Answers

Knock sensor diagram


On the 2.4 liter four-cylinder engine it is located on the siie of the engine block (the side nearest the firewall).

On the 3.0 Liter V-6 engine there are 2 knock sensors and the are located in the "valley" below the intake manifold. You'll have to remove the intake manifold to get to them.

Jul 22, 2014 | 2003 Toyota Camry

1 Answer

How can I fix a1998 Toyota Camry which the engine knocking


Once the engine is knocking when it's running, it has to be removed
frdm the car, taken apart and repaird.

May 09, 2014 | 1998 Toyota Camry

1 Answer

Knock Sensor


Hi. its somewhere under the intake manifold. quite painful to access.

Feb 04, 2014 | 1999 Toyota Camry

1 Answer

Where is the knock sensor on a 2003 Toyota Camry?


code p0325 = ecm engine control moduel

Aug 20, 2012 | 2003 Toyota Camry

1 Answer

How i repair a knock sensor for toyota camry 93


hi first try this? unbolt knock sensor and clead both engine block suface and the brass surface of sensor then re bolt to engine block do not use any grease/lube make sure the wiring to sensor+plug are clean then recheck operation of sensor ? if no joy ? renew sensor

Apr 06, 2010 | 1993 Toyota Camry V6

Not finding what you are looking for?
2002 Toyota Camry Logo

778 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...