Question about 1991 Chrysler New Yorker

1 Answer

Whole instrument cluster is completely dead.

The entire instrument panel is dead. not one single gauge even twitches and no lights ever come on at all. would this be a fuse issue or do i need and entirely new cluster for the car? if so, is a junk yard the best but also cheapest route to go?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with my 92 new yorker my over head consle didnt work so it was shorting out my guages if u remove the four screws in the overhead consle and carefully lower it down there is a little black plug with small wires about 4 or 5 if you unplug the little plug your guages should work but like i said my overhead consle didnt work and if yours does it wont hurt to try this option

Posted on Dec 23, 2012

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 48 Answers

SOURCE: 2000 Chrysler Voyager Instrument Cluster is dead

have you got a dimmer switch on your model to dim the dash lights. if you have it may be faulty. link the cables together if the lights work the switch is faulty. if you have not got a dimmer switch
your printed circuit on the back of the dash may be faulty or the plug in the back of the dash is not pushed all the way in. hope this helps

Posted on Apr 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the instrument panel cluster located in 1999 grand voyager


The cluster is the array of gauges, warning lights, speedometer, and tachometer that is fitted into the dash. The whole array is called a clluster because it can be removed from the dash as a single assembly.

Dec 02, 2012 | Cars & Trucks

3 Answers

My oil pressure gauge reads over 80. So i replaced the sending unit on top back of block and no change is there another sending unit or baybee its in the gauge itself????????????


Hi, this is a pretty common problem on these Silverado instrument clusters. We can repair it for you or provide you with the parts to do it yourself. Click here to learn more about these Silverado instrument cluster problems: Dr Speedometer Instrument Cluster Repair Speedometer Repair Guage...

Jan 03, 2011 | 2003 Chevrolet Suburban 1500

2 Answers

All gauges stopped working on Friday but came back on after going through checking all lights etc. After turning right signal light on ( while driving) the gauges came on. All gauges went again today and...


this is a common issue. the internals of the instrument panel clusters become defective, and is a sealed unit - the entire cluster must be replaced. this must be performed at the dealer because they need to reprogram the mileage into the new cluster with the GM scantool. you should call your local dealer with your VIN#, some models are covered by a secret / extended / goodwill warranty. if the dealer says no, request the 1800 number to contact gm. good luck!

Oct 25, 2010 | 2004 Chevrolet Silverado

1 Answer

Info cluster including gauges are dead. fuse checks good


Is the cluster completely dead or is it a problem with the gauges only? If the entire cluster is dead it could be a cracked circuit board.Another posibility is a bad ground. This is known to occur in the 99-02 Silverado clusters and the 03-06's but not as many.

Jun 01, 2010 | 2003 Chevrolet Silverado 1500

2 Answers

Gas gauge has stopped working on 1998 Buick Park avenue, could it be a fuse?


If it was the sending unit, it is accessible through the trunk floor. A problem I have with my Park Ave gas gauge is when I get a dead battery and try to start the car, the needles will twitch and it sends my gas gauge needle to the far right side. This causes it to rotate/fall under the proper gauge are and come up under the rest pin on the left side. When that happens, I have to pull my whole instrument cluster and rotate it around so the needle goes back up to the top.
Check where you needle is the next time you turn the key to run. If its under the little rest pin at the empty position of the gas gauge, then this should be the fix.

Sep 03, 2009 | 1998 Buick Park Avenue

1 Answer

1999 Oldsmobile Alero Gauge problem


Could be lose connection on the back of the instrument cluster ,which means you would need to pull it out of the vehicle . Check pin fit to instrument cluster . for the B+ voltage suppy an ground connection's .
You said autozone - Tried to have auto zone diagnose from inside the car, came up with no codes. That's in the PCM - engine computer . There scan tool will not communicate with the instrument cluster ,which is also a computer in it's self. Need a factory scan tool to check instrument cluster.
Speedometer and/or Odometer Inaccurate
Step
Action
Value(s)
Yes
No
Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure, inspect the fuse(s) for an open.
1
Did you perform the Instrument Cluster System Check?
--
Go to Step 2
Go to Instrument Cluster System Check
2
Turn the ignition switch to the ON position.
With the scan tool select Instrument Panel Cluster, Special Functions, Instrument Panel Cluster (IPC) gauges.
Perform the Speed Gauge Sweep Test.
Does the speedometer complete a full sweep when commanded?
--
Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls
Go to Step 3
3
Replace the instrument cluster. Refer to Instrument Cluster Replacement .
Did you complete the repair?
--
Go to Instrument Cluster System Check
--
With a scan tool select the instrument panel cluster, data display, gear status.
Monitor the gear range status.
Move the gear lever through each gear.
Does the scan tool display the correct gear selected?
Your best bet , take it to a qualified repair shop .

Feb 27, 2017 | 2001 Oldsmobile Alero

2 Answers

Instrument panel


if nothing on the guage cluster is working, chances are you lost power to the whole cluster. try checking your fuses. betcha one of em is blown.

Jul 07, 2008 | 2002 Dodge Neon

1 Answer

Gas gauge no longer works


The light behind myRemove the cluster bezel from the instrument panel. See Cluster Bezel in this group for the procedures.
Remove the four screws that secure the instrument cluster to the instrument panel Instrument Cluster Remove/Install
Pull the instrument cluster rearward to disengage the two self-docking wire harness connectors
NOTE: The instrument cluster has two self-docking wire harness connectors that will be automatically aligned with, and connected to the instrument panel wire harness when the cluster is installed in the instrument panel.
Remove the instrument cluster from the vehicle.
Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N·m (20 in. lbs.)
when I turn my headlights on. All the other gauges are lit, but not the gas gauge. How do I get in there to replace the bulb and fix this? Or is it a fuse problem? I have a 1998 jeep scout Thanks

May 14, 2008 | 2007 Jeep Scout

Not finding what you are looking for?
1991 Chrysler New Yorker Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...