Question about Dodge Durango

Open Question

2000 dodge durango firing order

Firing and position on distrubtor cap

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
ZJLimited
  • 17970 Answers

SOURCE: firing order for spark plug wires for a1999 dodge

1999 Dodge Truck Durango 4WD 5.2L SFI 8cyl

e8dbcd9.jpg
5.2L and 5.9L Engines Firing Order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

I hope help you with this. Good luck (remember rated this help).

Posted on Oct 09, 2009

Ad
ZJLimited
  • 17970 Answers

SOURCE: firing order for dodge durango 1998 5.2 liter

For 1998 Dodge Durango 4WD 5.2 liter V-8 VIN "Y"...

285823d.gif


Hope this helped (remember coment and rated this).

Posted on Apr 05, 2010

ZJLimited
  • 17970 Answers

SOURCE: 1999 dodge durango 5.2 firing order diagram

1999 Dodge Durango 5.2 liter V-8 VIN "Y"

66ccb28.gif


Hope helps (remember rated and commetn this).

Posted on Sep 01, 2010

duane_wong
  • 6826 Answers

SOURCE: Need a diagram for the

Firing Orders NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
If a distributor is not keyed for installation with only one orientation, it could have been removed and installed improperly and then rewired. The new wiring arrangement would maintain the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes of the current plug wire locations and orientation of the distributor cap.
3.9L Engine dod_trk_39firingorder.gif

1-6-5-4-3-2
5.2L Engine 1-8-4-3-6-5-7-2
5.9L Engine Firing order: 1-8-4-3-6-5-7-2
4.7L Engine chry_47_firingorder.gif

Firing order: 1-8-4-3-6-5-7-2
prev.gif next.gif

Posted on Oct 12, 2010

Testimonial: "Great!!"

  • 3074 Answers

SOURCE: do you have a diagram for a 2000 dakota 3.9

Firing order 165432 Clockwise from #1. The cylinder numbers are as follows : From the front of the truck, on the drivers side it is 1-3-5 , on the passenger side 2-4-6. Hope this helps Tim

Posted on Oct 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed a new distributor and entire ignition for a 2000 Dodge Durango. It will not start.


it needs more than spark to run! You need compression and fuel too.Try spraying some throttle body cleaner down the intake while someone cronks it.If it runs on the spray,check the fuel sytem(maybe a bad fuel pump,pump relay,blown injector fuse,etc)

Jun 13, 2012 | 2000 Dodge Durango

2 Answers

How to time dodge 5.9 motor. it wants to fire but will not. the marks of the harmonic balencer vs. where the distributor button goes


when you install the distributor the rotor button should point at the # 1 plug wire on the distributor cap make sure you are on the compression stroke of the motor when doing this you can verify that you are on the compression stroke by removing the #1 spark plug and turning the engine over while holding your fingure over the spark plug hole it will push your finger off the hole you need to spin the engine .spin the engine over slow while doing this so you don,t pass the timing mark on the harmonic balancer.

May 08, 2011 | 1999 Dodge Durango

1 Answer

I need the firing order on the distributor for a 1999 dodge durango 5.9 engine


Below is a diagram with firing order. Arrow on the distributor cap indicates direction of engine rotation.


emissionwiz_46.gif

Mar 02, 2011 | 1999 Dodge Durango

1 Answer

FIREING ORDER DODGE DURANGO 2000


there are 3 diff engine avail firng order is the same for all three

1-8-4-3-6-5-7-2

Jun 03, 2010 | 2000 Dodge Durango

1 Answer

Firing order of 98 durango with a 5.2L


For the 1998 Dodge Durango 5.2L V8:

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
..........(back)
_____..........._____
|...8...|..........|...7...|
|...6...|..........|...5...|
|...4...|..........|...3...|
|...2...|..........|...1...|
..........(front)

Distributor:
........(back)
............3
....4..............6...
.......................(+)-screw: rounded-end of Cap
8......................5
(+)-screw: square end of Cap
.....1...............7
..............2
.........(front)

Rotation: Clockwise

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!


Apr 09, 2010 | 1998 Dodge Durango

1 Answer

Need diagram for firing order to a 2000 Dodge Durango Magnum,4.7


I apologize for the late response...Due to the bad economic situation this site has had a substantial (+50%) increase in the number of questions being asked in the last four months.

For the 4.7L:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
8----------7
6----------5
4----------3
2----------1
(Front of Vehicle)

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Feb 01, 2010 | 2000 Dodge Durango

1 Answer

Wiring diagram for distributor cap


the old fashioned way to check this is to remove your distribution cap and watch the position of your rotor arm to see which position it is for cylindar 1. then take out the spark plug for cylider one and use a light to see inside you should be able to see the piston move up and down throgh the hole, now the piston only goes down twice in one cycle so by cranking the engine round by hand you can correspond where the piton just starts to go down is the point of ignition so the rotor arm should be at the same point lined up with the spark lead for cylinder one inside the cap. if it mile off then cylinder 1 is at the top of the induction stroke, so crank round again until the piston starts to go down again. then you have the distributor arm at the right position, then follow round the cap the firing order for your engine. and then wire up the cap the same way.

Nov 14, 2009 | 2000 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...