Question about 2003 Pontiac Montana

Open Question

98 pontiac montana glove box won't close

When you open it it won't close

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1999 pontiac montana keyless entry

You have to go to the dealership where they will order you one.(You will have to supply the VIN number to them) The cost is around 100.00 CDN If you require a key made it has to be programmed first before attempting to use it because if you try and use it and it does not work it will lock up your ignition and then you will have to pay labour costs to have them undo it. The 1999 Montana has a anti theft chip built in (this is the blue light that flashes...looks like an alarm is on) so if anyone tried to put a key in the ignition that is not programmed for that vehichle it locks it up.

Posted on Feb 13, 2009

  • 4369 Answers

SOURCE: program my garage door opener on my pontiac montana 2005

you probably have a garage door opener that changes the code after each opening. I had to push a button on the door motor and then run to the car and push the opener button within 15 seconds. Your car salespwrson is usually an expert at this.

Posted on Mar 21, 2009

  • 3614 Answers

SOURCE: My 1999 pontiac montana rear sliding power door will not work

hi there,

this can be stuck contacts on the door. better to check the sliding contact point for any dirt debris on the slide or it may need some lubricant for easily sliding.

Posted on Apr 18, 2009

  • 2 Answers

SOURCE: 1993 Pontiac Grand Prix

code all 1s

Posted on Sep 04, 2009

  • 334 Answers

SOURCE: Car power window failed - need to get closed

You would have to remove door panel and remove the two nuts fastening the window to the window motor regulator then slide window up and use tape to hold it up until you can get it repaired

Posted on Nov 26, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2002 pontiac montana wont start won't turn over

First thing I would check would be the battery. Open the hood and make sure the battery terminals are tightly connected to the battery (try to turn them on the post by hand). If they are tight and you have a volt-ohm-meter you can check the battery charge yourself. If not you can remove the battery and take it to an autoparts store and ask them to check it for you.

Oct 01, 2012 | 2002 Pontiac Montana

1 Answer

Rear windows on 2003 Montana won't close, now that they're open. Is there 2 motor, one for each window. I;ve looked at the switch & all appears okay if it's the motor(s) are they easy to...

If the lockout switch on drivers door is "OFF"... Window fuse's and relay's may be up under passenger side dash or behind glove box.
Could also be a broken wire in the rubber boot going from the door to the body. You will have to eliminate each till you find the culprit.
The motor and the relay are the most likely to cause this problem. Try swapping the relay with a working window relay. If it still doesn't work, remove the door panel and remove the window motor.
Turn the motor shaft in both directions by hand several turns. Then plug the motor in and see if the switch will now run the motor. Sometimes thats all it takes to get it working again. I have had to do this with brand new motors. If voltage is not present at the motor connector, either a bad switch or a broken wire exsists. Make sure to check for voltage coming to that windows switch. Actually, GM use's a circuit breaker type relay for each window and one fuse for all the circuit breakers.

Aug 02, 2011 | 2003 Pontiac Montana

1 Answer

I can't find the fuse box on 2005 pontiac montana because drivers side blinker clicks really fast but doesn't work.

sumtimes they put the fuse panel behind the glove box, if its not under the hood or under the dash

Jan 15, 2010 | 2005 Pontiac Montana SV6

1 Answer

Where do i locate the cabin filters on the a 2006 pontiac montana sv6

locatedbehind glove will see a little door open door and theres filter good luck.

Oct 10, 2009 | 2006 Pontiac Montana SV6

3 Answers

Pontiac montana heater works but doesnt blow heat out on defrost

If the heater core is good and the blower works, the valve doors may not be opening and closing properly to direct air towards the proper vents. This may be because something has fallen in and is obstructing their movement. The actuating motors may not work properly, or the linkages that connect them to the mode doors may be worn or improperly adjusted. You can get a look at the mechanisms by removing the driver side knee bolster (two screws) and a lower trim panel on the side of the center console.

Be careful fiddling with the linkages. Everything is plastic and easy to break, and replacing the heater box requires removing most of the dash.

Dec 20, 2008 | 2001 Pontiac Montana

2 Answers

Where is the ecu in a 99 pontiac montana van

The ecu is located under the Air filter housing on my 99 montana

Nov 30, 2008 | 1999 Pontiac Montana

Not finding what you are looking for?
2003 Pontiac Montana Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides