Question about Cars & Trucks

Open Question

Just changed a clutch on 2008 yaris mmt gearbox all is aligned with clutch tools but put it all together and gear won't engage just grinds! Help please does it need calibrating?

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

lobsterman72
  • 91 Answers

SOURCE: tdi clutch pedal pushed all the way down but hard to shift gears

Check your clutch fluid level, sometimes a seperate reservoir (drivers side on firewall), some clutch systems take fluid from the brake system (check brake fluid). If thats ok then the clutch slave may be failing.
If the clutch fluid is low refill it and check for leaks (or just wait till the symptom comes back). If it's happens often then theres a leak in the line or the slave somewhere.

Posted on Jul 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When clutch is engaged and you are changing gears there is a grinding noise kind of like a broken barring noise but that's not the problem, and it sticks when you change gears to 1st. We just did a...


sounds like the syncronizers are broken in the gearbox or it just may be low on gear oil all together.. check gear level by removing the plug in the side of the box under the vehicle and stick the smallest finger in the hole and bend down..see if fluid oil shows on fingertip..if not fill until it runs out this plug hole..there is also a drain at the base near the back tailshaft.. this is not a level check location.. it is a drain only.. if in doubt, get a towyard replacement trans gearbox and intall it in and it should work.. good luck

Jan 22, 2013 | Cars & Trucks

2 Answers

Isuzu trooper gearbox problems


You need to be a bit more specific when describing your problem. By "not getting any gears" do you mean (A) the shift lever will not move into position to select a gear?, or (B) shifts into gear position, but does not move? For (A), try reverse (it is not synchronized); Do you get a grinding of gears sound when you try to engage it? If so, this sounds like a problem with the hydraulic clutch release system. If it gets low on fluid, it will not release enough to let you put it in gear. top off the reservoir(tiny 1/2 cup sized one on driver side fender under hood below and to the right of the brake master cylinder) and frantically pump the clutch pedal about 100 times (that\'s right, 100!)
If the tranny goes into gear but the vehicle won\'t move, this sounds like either the clutch disc is worn too thin to grab, or something is broken in the driveline. Try locking the hubs and putting it into 4WD and see if it moves then. If so, then the rear wheel driveline or driveshaft has a problem. Good luck!
<Splinter, LA, CA 1990 Trooper >352,000 miles>

Jan 22, 2013 | 1999 Isuzu Trooper

1 Answer

I have a 1989 z24 cavilier and i just changed the slave cylinder and now when i start it and press the clutch it makes a grinding noise. When i try to put in gear it wont go in any gears and makes some...


hi i was wondering if anyone can tell me whats going on with my 89 z24 cav i just replaced two shifter cables on she's a 2.8l 5 speed and now when i starts her and lets the clutch out she dosen't engage at all but she has no noises and no grinding goes in gear fine but just won't move hope someone can help thanks

Jul 04, 2012 | Cars & Trucks

1 Answer

I am having a gear shifting problem with my Kia Sportage (4x4 Gasoline engine, 2009 version). taking off from an incline drive it is difficult to shift from first to second gear (grinding noise). Also...


Check your clutch fluid box located by your breaks master cylinder. Your clutch works like your breaks in that when you press the clutch pedal it uses hydraulics to disengage your clutch plate. If it's low or not working properly your clutch plate won't fully disengage and could lead to more problems.

May 27, 2011 | 2000 Kia Sportage

2 Answers

How do i change the gear oil for a toyota yaris 2007? i'm having difficulty changing my gears


There should be a drain plug on the bottom of the gearbox. Unlike engine oil, usually the filling location for gear oil is on the side of the gearbox. You use a syringe or a specialised tool to get the gearoil in, and when it gets up to the level of the hole it's full. However I do agree with agent91 that your clutch is a more likely cause. there are some tests you can do to check the health of your clutch e.g. drive along in 4th at 40, clutch down, rev to redline, snap out clutch keeping your foot on throttle, and if revs don't drop to the correct speed in around a second you're slipping.

Mar 26, 2010 | 2007 Toyota Yaris

1 Answer

Gearbox engagment


i cant solve this i got the same problem did u ever solve this. i have changed - clutch,slave an master cylinder and the gearbox has been rebuilt

Dec 11, 2009 | 2000 Mini Cooper

1 Answer

How to change the manual gearbox oil on Toyota Yaris 2008? (The locations of the gearbox drain and fill in plugs)


drain plug on the bottom of the gearbox,fill plug on the side of the gearbox and you only fill it till it just starts to run out and put plug back in should be 24 mm plug

Sep 20, 2009 | 2008 Toyota Yaris Sedan

1 Answer

Grinding sound on pressing clutch in at high revs


The grinding sound may be a throw out bearing or the pilot bearing. The sticking throttle problem sounds like a linkage or cable binding up from possibly damage due to the impact from the accident.

Feb 05, 2009 | 2008 Toyota Yaris Sedan

1 Answer

Gear Box


You need to check the adjustment on the shifter, I think that may be the problem, do that before assuming the gearbox is defective.

Sep 18, 2008 | 1991 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...