Question about 2008 Ford F 250 Super Duty 4WD

Open Question

4x4 light flashing wont go into 4x4

Yesterday I was using my truck in 4x4 and everything worked normaly. Today while driving in an icy parking lot I tryed to shift my truck into 4x4 high and the light came on but was flashing and the truck was clearly not in 4x4. I checked the plugs on the transfer case and all were plugged in. I just cant seem to figure out the problem.

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
dcgun007
  • 63 Answers

SOURCE: 98 Ford F150 4x4 wont engage

I copied something that you might use because it was handy I know its not going to be exactly for you but it might get you fixed. Let me know if it helps or NOT please. gl dc

Posted on Jun 22, 2009

Ad
  • 30 Answers

SOURCE: 02 Ford Explorer XLT 4x4 High light flashes and

I had same problem on my 2002 explorer. Its either the computer module, or the electric solenoid on the transfer case. In my case it was both. The computer module I had done twice in 14 months.

Posted on Jul 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4HI, 4LO and VSC OFF lights are flashing, the ABS and Slip Indicator lights stay on. I was operating in 4Hi earlier and all worked ok. Parked truck for about 2 hrs and then re-started to drive away the...


lot of time 4X4 will engage only in neutral and disengage in neutral. some times switching from drive to neutral and revers will help to disengage. just sake back and for till you feel the 4X4 is off.
Good luck

Mar 15, 2015 | 2011 Toyota Tundra

1 Answer

Battery light went on and a/c light started flashing


check and make sure the drive belt did not break thats what is sounds like.

Aug 24, 2009 | 1998 Toyota Camry

1 Answer

!998 ford ranger stuck in 4x4


sounds like it's the motor is going bad or has a bad connection, try cleaning the connector if there isn't any gunk in the connector, check the manual see if there is a ohmn test you can run on the motor, if not i'd replace the motor.

Mar 19, 2009 | 1998 Ford Ranger SuperCab

1 Answer

95 blazer 4x4 4 wheel drive not working


There is a vacuum actuator mounted on the front differential that locks the shafts to engage four wheel drive.

Jan 28, 2009 | 1995 Chevrolet Blazer

1 Answer

4 Hi light flashing


Try this before you do any repairs or sp[end any other money. Make sure that vehicle is on a flat surface. Start vehicle and Push down on brakes while holding brake put vehicle in neutral. Still holding brakes in NEUTRAL, Engage 4x4, it should work. If it doesn't get back to me. Good Luck. If I fixed ya leave me a FIX YA comment

Dec 20, 2008 | 1997 Chevrolet Suburban

1 Answer

Unable to shift from 2hi to 4hi in 1999 gmc jimmy slt 4x4


do the lights work on selector buttons if so check actuator on transfer case may be bad or replace selector switch i just did and my four wheel drive works sometimes

Dec 18, 2008 | 1999 GMC Jimmy

1 Answer

1998 GMC JIMMY 4X4 NOT ENGAGING


Sounds like a vacuum line is off

Dec 12, 2008 | 1998 GMC Jimmy

1 Answer

Car wont go out of park


do the brake lights work ?
they probaly do not,there is a brake light switch on the brake pedal lever,there is most likley a broken wire at this switch.If wire is broken repair wiring.
If this is the problem and you are unable to repair your self,do not start vehicle,put key to run position,then pull shifter into netural,then start vehicle and now you will be able to drive to get repaired.Remember if this is your problem you have no brake lights,be careful.

Aug 24, 2008 | 1994 Mercury Grand Marquis

1 Answer

1999 isuzu rodeo 4wd not woking


I had this happen to a 1999 4x4 LS and my sisters boyfriend mentioned to periodically turn 4x4 on/off at least once a month.
What I did was go down a stretch of road slowly and attempt to turn it on/off till it became unstuck.
Drove around 10 miles on a road that was hardly used...to get the stupid light to quit flashing I had to put it in park and try to creep forward ---while using off settiing or put in park then reverse...while using the off -setting on 4x4. My patience paid off. They get sticky...you must be cautious... because there is a way to cause vibration and then it won't start...some deadman feature that I experienced once and the LWD must have slipped in a little and I had to look at everything.
Mine is an Automatic with the shift on the floor...that can get sticky too.

Good luck and hope this helps...mine had lots of growing pains but I get 23 mpg and it runs/idles better and the only gremlin left is some short in the dash which leaves the lights D/3 (one or both on)for the shift indicator on:)

Jun 19, 2008 | 1999 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...