Question about 2004 Chrysler Sebring

Open Question

How to loosen the belt tensioner pulley on a 2.4 litre dohc 2005 sebring

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

polarcycle
  • 1392 Answers

SOURCE: removing the belt tensioner

You need a very long extension, and a swivel with a long socket. You can get it from underneath that way.

Posted on Mar 05, 2009

c17hydro
  • 2984 Answers

SOURCE: Belt idler tension

You didn't mention what size motor so here ya go. Check to match your accessories.

e2f5629.gif
a9e13c0.gif

Posted on Apr 03, 2009

MNfisherman
  • 11896 Answers

SOURCE: how do i loosen the tensioner on the pulley to

You will see an idler/tension pulley, this pulley can be pulled up or pushed down. It is not connected to anything besides a mounting bracket. It is designed to move to adjust tension on the belt.

Posted on Jun 17, 2009

wireguy212
  • 1627 Answers

SOURCE: 2005 chrysler sebring 2.4L 4cyl dohc engine wants to start

Get the exhaust system checked,you may need a new converter.

Posted on Nov 06, 2009

  • 1757 Answers

SOURCE: I need a timing belt diagram for a 2005 chrysler sebring

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...
http://www.2carpros.com/car_repair_information/year/2005/make/chrysler/model/sebring/2005_chrysler_sebring_timing_belt_diagram_marks.htm

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I loosen belt to replace Altenator


The tension pulley is the one that is not driving anything, and has a large spring assemble attached. At the centre on the (cllosed) side there should be a 1/2" square hole that will receive your torsion bar. Pull the pulley assembly so that the belt is released,and remove the bely.

Aug 16, 2015 | 2005 Dodge Stratus Sedan

1 Answer

Replace belt a/c


It may depend on engine litre size. 4 cylinder shows top pulley for ac belt, needs to be loosened. to release tension.

6 cylinder shows tensioner pulley on mounting bracket for compressor. Loosen the bolt for tensioner pulley to release tension.

Feb 23, 2015 | 1991 Mitsubishi Mighty Max

1 Answer

How do I relieve tenstion on 2005 Sebring belt tensioner?


Find the appropriate socket for the bolt along the tensioner pulley and attach it to the 3/8-inch ratchet handle. Place the socket head over the bolt on the tensioner pulley and push it in the direction indicated on the configuration chart on the hood of the vehicle to loosen the tension on the serpentine belt. Take the flat-head screwdriver to remove the serpentine belt from the tensioner pulley.

Nov 10, 2013 | 2005 Chrysler Sebring Conv

1 Answer

Tensioner location on 97 chrysler sebring 2.5L 6 cyl


The tensioner pulley looks like an idler pulley, only with an adjusting bolt protruding out about 2 inches from just behind the pulley. Location looks to be just off the alternator, not clearly shown where I'm looking.
To loosen belt, you loosen the tensioner pulley nut, and then turn the adjusting bolt in to relieve tension. When putting the belt back on, adjust tension with adjustment bolt, then tighten the pulley nut. This is for Sebring Coupe, Convertible is different. Good luck.

Jun 22, 2012 | Chrysler Sebring Cars & Trucks

1 Answer

How to remove and replace serpentine belt on 2004 sebring with 2.4l dohc engine. are special tools needed, space seems really tight.


MY solution was to remove the rain shroud underneath the car, and work from beneath. Route the belt over all the pulleys, leaving the tensioner for LAST. With someone above releasing the tensioner with a serpentine belt tool, you can work the belt over the tensioner bit by bit. Make sure the belt is seated correctly before engaging the tensioner.

Nov 04, 2010 | 2004 Chrysler Sebring

1 Answer

1999 sebring serpintine belt installation


My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.

Click on the following direct Link. It has several Diagrams for your Belt depending on your engine size and options (AC/No AC etc.) AND whether you have Tensioners OR Locking/Adjusting Bolts/Nuts.
IF APPLICABLE: These point out the direction of rotation for the Tensioner in order to loosen and reinstall the Belt.

IF APPLICABLE: These also point out where the Locking and Adjusting Bolts/Nuts are, to loosen the belt and remove; and reinstall the Belt and .

Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.


Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/1999/make/chrysler/model/sebring/1999_chrysler_sebring_drive_belt_routing_diagram.htm

Dec 28, 2009 | 1999 Chrysler Sebring

1 Answer

How can i get the idler tension to loosen up to cange my belt on my 2006 sebring


you loosen up center locking bolt bolt of tensioner pulley.there is a bolt next to tensioner pulley you turn the adjusting bolt to achieve the proper tension.

Dec 13, 2009 | 2006 Chrysler Sebring

1 Answer

1998 Dodge Avenger serpentine belt issue


What size of motor, do you have a/c and which belt are you replacing? Not sure about your engine size since you did not list it so please pick the applicable motor:

Sebring Coupe And Avenger (2.5L VIN N Engine)
  1. Disconnect the negative battery cable.
  2. Loosen the tension pulley locknut.
  3. Rotate the adjusting bolt to decrease the belt tension.
  4. Remove the drive belt from the engine.
To install:
  1. Position the replacement belt around the pulleys, making sure the belt routing is correct.
  2. Adjust the belt by rotating the adjusting bolt until the correct tension is reached. Refer to the procedure earlier in this section for belt adjustment.
  3. Once the desired tension is reached, secure the locknut. Recheck the belt tension.
  4. After the belt is installed and adjusted properly, tighten the locknut to 17 ft. lbs. (23 Nm).
  5. Connect the negative battery cable.

2.0 DOHC

Power Steering Pump And A/C Belt
  1. Disconnect the negative battery cable.
  2. Loosen the tension pulley locknut.
  3. Rotate the adjusting bolt to decrease the belt tension.
  4. Remove the drive belt from the engine.
To install:
  1. Position the replacement belt around the pulleys, making sure the belt routing is correct.
  2. Adjust the belt by rotating the adjusting bolt until the correct tension is reached. Refer to the procedure earlier in this section for belt adjustment.
  3. Once the desired tension is reached, secure the locknut. Recheck the belt tension.
  4. After the belt is installed and adjusted properly, tighten the locknut.
  5. Connect the negative battery cable.

Oct 29, 2009 | 2000 Dodge Avenger

1 Answer

Drive belts


If this car has a v-6 (2.5). You have to loosen the belt tensioner. It is located along the side of the passengers wheel well. Turn the passengers tire outwards, and kneel down. Look inside the wheel weel, and about the same line of sight as your eyes when you look in there you will see, a bolt, and a pulley, with a bolt in the center of the pulley. Loosen the pulley bolt first, and then loosen the tensioner bolt, Pun on belt careful to watch the routing, and pull pulley tight, with hand, and then tighten the tensinner bolt. Belt should be taught, but not very tight. Then tighten the pulley bolt.

Mar 27, 2009 | 1997 Chrysler Sebring

1 Answer

Belt came off 1998 chrysler sebring lxi


you have two belts . put the large belt on first . it goes around crank pulley air conditioning pulley alternator pulley.loosen tension pulley to adjust belt. tension. then you put the other belt on power steering pump pulley and crank pulley. adjust belt tension loosen power steering pivot bolt. that it.

Mar 16, 2009 | 1998 Chrysler Sebring

Not finding what you are looking for?
2004 Chrysler Sebring Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...