Question about 2006 Pontiac Montana SV6

1 Answer

Horn not working!

I have a 2005 pontiac Montana. V6 3.5L
Trying to figure out why horn isn't working. I checked power to the horn and the ground. I have no power to it and the ground is good. I checked the fuse. Not blown. No power to it either. I checked the relay, I hve no power on any of the terminals. That's as far as I can go with it, without a diagram. Can you help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

Check with dealer there was a recall on horn button spring not making contact rec insp that first.

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 pontiac montana horn doesn't work. Fuse is OK and Relay is OK. What could be the cause?


The horn itself may be faulty, disconnect it and use a voltmeter to see if the voltage changes on the wires feeding it when someone presses the horn button. Most horns are 12V so you should also be able to connect the horn directly to the battery to see if it works. Just get the polarity correct.
The horn switch harness. (the switches and wiring in the steering wheel) Disconnect the negative battery connection before attempting to check this as the air bag is also in that area.

Nov 21, 2016 | 2004 Pontiac Montana

1 Answer

2000 pontiac montana power windows stopped working ,checked fuses,all good ,checked voltage all good except where the up/down switch is the voltage is1.5 it reads 3.5 then goes down 1.5 .any suggestions?...


Manual window crank changeover would mean a different regulator and door panel for each door. It's very common for the wire harness between the A-pillar and the door frame have damaged wires, particularly the system ground wire.Really need to check that circuit! You can supply your own ground to the switch and recheck the operation just to verify and eliminate the harness as an issue.
If you have full battery voltage and a good ground circuit to the pin connector on the master window switch, then it's probably just the switch and the dismantler near you should have one for less than $20.

May 06, 2014 | 2000 Pontiac Montana

1 Answer

I'm fixing up a Camaro I bought from a friend and one issue I can't figure out is why the horn isn't working. I've checked all the fuses under the hood and they are all good. When you


the clicking sound you here is the switch get out a test light go straight to your horn have someone hit the button if your test light lights up your getting power next thing to do is to check ground use a ohm meter and check for less then .5 of ohm of resistance any more is bad and you should run a new ground if your still un sure hook the horn straight up to the battery and see if it will go off lol good luck!!!

Jul 09, 2012 | 2001 Chevrolet Camaro

2 Answers

My 2005 Pontiac Sunfire horn stopped working. I've tried replacing the fuse, but that's not the problem. Any ideas?


Hello: It could be a failed horn. the best way to check is to get a test light and connect one end to the green wire at the horn connection and the other end to a good ground, have helper press horn. if test light lights up the horn has failed. also you might check the fuse box under the hood and see if there is a horn relay. if there is a horn relay then look to see if there another relay like it. if there is one swap the relays and see if the horn works.

Jan 26, 2011 | Pontiac Sunfire Cars & Trucks

1 Answer

Horn stop working......horn relay clicking and the fuse ok ...do i have a defective horn ( bad )


could be the horn, wiring to it or a bad ground, pretty straightforward diagnosis will tell you

Aug 03, 2010 | 2004 Pontiac Montana

3 Answers

Looking for ground location for the horn , for 05


Most of them are grounded to the frame of the vehicle. You could try changing the horn relay , which is located under the hood, in the engine compartment fuse block. It should be clearly marked on the cover. Or, it could be the horn itself that is faulty. It doesn't take much moisture or dirt inside them to make them not function properly.

Nov 15, 2009 | 2005 Pontiac Grand Prix

1 Answer

How do I fix the horn? Is there a common problem


does the horn have prower source check all the power source and make sure horn is properly ground to vehicle body to make sure horn work unplug the horn wire and put touch the horn with twelve power from battery

Aug 06, 2009 | 2005 Pontiac Sunfire

Not finding what you are looking for?
2006 Pontiac Montana SV6 Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...