Question about 2004 Toyota RAV4

Open Question

How to change headlight assembly 2004 RAV4

Complete Headlight Assembly replacement

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 104 Answers

SOURCE: Moisture in headlight assembly, 2004 toyota seinna

Once the factory seal is leaking moisture, it can be hard to dry and reseal. You can try a hir dryer, and then look for a seam to lay silicone on, but the recommended fix is to replace the whole headlight assembly. The lens is not removable like on older lamps. The pieces are molded, and then epoxied together. Hard to split apart and get back together without damaging. Try a salvage yard.

Posted on Mar 20, 2009

  • 347 Answers

SOURCE: changing headlight 1996 toyota corolla

there are nuts/bolts behind the grill. remove them.

Posted on Sep 18, 2009

  • 157 Answers

SOURCE: How do you replace the headlight bulb on a Toyota Corolla 2003

You can and it is not difficult, there are two bolts holding the top of the headlight to the body just over the radiator and a couple of screws holding the indicato in place, but you can access the back of the light fitting without doing so . It is a bit of a squeeze on the battery side.

Posted on Mar 08, 2010

01fordeb
  • 1033 Answers

SOURCE: Can the headlight assembly of

The whole bulb will have to be replaced. One bulb has high/low beam. You should be able to access it from behind the light assembly. You should have a locking device at the headlight assembly and be able to pull the assembly out to make it easier.

Posted on Sep 09, 2010

1ATony
  • 159 Answers

SOURCE: how do i remove headlight assembly on 99 camry?

This video will show you how to remove them on your vehicle.">

Posted on Jan 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the bulb in 1999 RAV-4


Instructions
    • Open the RAV4's hood and locate the headlight bulbs plugging into the rear of the headlight assemblies. Each assembly has two bulbs, one outer and one inner. Unplug the wiring harness from the rear of the burnt-out headlight, by pressing the locking button and pulling down on the harness.
    • 2Grab the rear of the bulb and rotate the bulb about a quarter turn counterclockwise to unlock it. Pull the bulb from the headlight assembly.
      3
    • Grab a new 9005 (high beam) or 9006 (low beam) bulb by its plastic base. Insert the bulb in the rear of the headlight assembly, lining up the tabs on the bulb with the notches in the headlight assembly, and twist it clockwise to lock the bulb in place. Do not touch the glass part of the headlight bulb, as the oils from your hands can cause the bulb to fail prematurely.
    • 4Plug the wiring harness into the receptacle on the rear of the bulb

Jun 27, 2012 | 1999 Toyota RAV4

2 Answers

How do i change my headlight assembly on a 2001 honda accord


HEADLIGHT REPLACEMENT

1. Remove the front bumper
2. Disconnect the connectors (A).
3. Remove the 5 mounting bolts (B), then remove the headlight assembly (C).

Fig. 21: Removing Mounting Bolts & Headlight Assembly
6_26_2012_3_27_45_pm.jpg

Jun 24, 2012 | 2001 Honda Accord

1 Answer

How to remove front headlight assembly


Hi,

1 Open the RAV4's hood. Locate the back of the headlight assembly, just behind the headlight. You should see a ring-shaped plastic cover.

  • 2 Turn the locking plastic ring clockwise about 1/2 inch and it should pop off.
  • 3 Remove the rubber grommet covering back of the headlight. Simply pull it out of the headlight assembly.
  • 4 Depress the spring latch holding the bulb in place behind the headlight. This is a wire latch that looks somewhat like a bent paper clip. Press it down and move it to the side, away from the light bulb. It should come free and flip open, freeing the bulb.
  • 5 Disconnect the light bulb from the plug. Replace it with the new light bulb, and replace the latch and rubber grommet. Replace the plastic ring cover and turn your headlights on to ensure proper installation.

  • Thanks

    Aug 07, 2011 | 2003 Toyota RAV4

    1 Answer

    I'm having a problem removing the headlight assembly from my 2004 chrysler crossfire, i've removed the 2 screws from the top and removed 1 from below through the wheel well, are there two screws...


    Last I checked Chrysler had changed it's headlight mounting from external screws to just the two adjusting screws. Looking down from the top, you should be able to see two Torx head screws that are used to adjust the headlight assembly. The remove teh head light assembly you remove those and the assembly should come right out. Both of these screws or adjusters will be 6 to 8 inches long. I hope your not removing this to change the headlight it self. Chrysler has been using the insert bulbs for several generations and to replace the bulb you only have to unlock the collar on the back of the light assembly and pull and then replace the bulb.

    May 14, 2011 | 2004 Chrysler Crossfire

    2 Answers

    How do you remove the headlights off a Pontiac grand am 2004


    Lighting Headlight, Side Marker, Park & Turn Signal Assembly Removal & Installation To Remove:
    1. Open the hood.
    2. Remove the front air deflector.
    3. Apply light pressure to the headlight lens to hold the headlight in place while disconnecting the retainers.
    4. Lift up the headlight retainers to release the housing.
    5. Remove the headlight assembly, pulling straight forward from the headlight mounting panel. NOTE: Note the location and position of the adjuster retainers and locator tab.
    6. Disconnect the wiring harness from the headlight assembly.
    7. Rotate the bulb(s)/socket(s) as needed counterclockwise to release.
    8. Remove the bulb(s)/socket(s) from the headlight assembly.
    To Install:
    1. Install the replacement bulb(s)/socket(s) to the headlight assembly rotating clockwise until fully seated.
    2. Connect the wiring harness to the headlight assembly.
    3. Position the headlight assembly to the mounting panel.
    4. Apply light pressure to the headlight assembly lens to hold the assembly in place while installing the retainers.
    5. Align the headlight assembly retainers and slide them over the assembly mounting tabs
    6. Install the front air deflector.
    7. Close the hood.
    prev.gif next.gif

    Feb 02, 2011 | 2004 Pontiac Grand Am

    2 Answers

    Trying to change headlight bulb


    Hello,

    The 2004 grand prix pontiac houses 2 headlight bulbs per headlight assembly. The low beam headlight are located at the fender of the car and the high beam on the grill side of the assembly.

    To replace the headlight bulb of Your pontiac grand prix, 2004 model. It is qiute technical and moderately easy to fix. There is no solution that cannot be done the DIY way, as long as You get the proper guide and You are technically able to do such works.
    1. Park the Grand Prix on a flat surface, apply the parking brake and ensure both the engine and headlight switches are off.
    2. Open the hood and approach the headlight assembly with the faulty headlight bulb.
    3. Locate the headlight assembly retaining clip. It's behind the headlight assembly on top on the fender side. Lift the clip upward halfway to release the headlight assembly.
    4. Pull the assembly out being careful not to scratch the paint on the fender or the lens of the assembly.
    5. Reach behind the assembly and disconnect the wire connection and plug from the headlight bulb socket.
    6. Turn the socket of the bulb counterclockwise 1/4-turn to remove the composite bulb from the assembly. Discard the bulb.
    7. Install the replacement bulb into the assembly (handling the plastic socket part only oil in skin will damage the glass bulb of halogen bulbs because of the intense heat they burn at), but ensure the tabs of the socket end of the bulb are aligned with the notches in the assembly before turning it clockwise and locking the bulb into place.
    8. Plug the wire connection back into the socket of the bulb before replacing the assembly back into place and pushing down on the retaining clip. Test the headlight bulb for operation before closing the hood.
    Hope this was helpful. Thank You for using FixYa!!!

    Jan 15, 2011 | 2004 Pontiac Grand Prix

    1 Answer

    Replacing headlight bulb. How to get the grill out.


    For agrivation go to walmart and have an oil change and ask them to change the headlight bulbs, they do NOT CHARGE EXTRA labor charges.

    Otherwise, gently apply pulling pressure on the front grill every few inches to get the grill unhooked on the top and bottom nearest the headlight assembly. Then have someone hold the grill assembly out while you pull out the headlight assembly to access the rear of it to remove the hold down nut to remove the bulb's. Reverse removal procedure, which is actually harder to put the headlight assembly back into place then it is to remove.

    Oct 20, 2010 | 2004 Buick Rainier

    1 Answer

    Replacing headlight assembly --or cover--for Kia Optima-2004



    1. Open hood. Disconnect negative battery cable.
    2. Remove five bolts attaching headlight and combination light assembly to vehicle. deb10ad.jpg 3. Pull headlight and combination light assembly forward clear of vehicle. 4. Rotate back cover counterclockwise to disengage from light assembly. 5. Pull socket with bulb straight out of headlight and combination light assembly. Regards, Jeep Brainy

    Jun 22, 2009 | 2004 Kia Optima

    1 Answer

    2006 toyota rav 4 fog light bulb replacement


    fIRST YOU SEE A RUBBER GASKET SURROUNDING THE HEADLIGHT PLUG IN THE BACK OF THE HEADLIGHT ASSEMBLY. pULL OFF THE GASKET AND LET IT HANG ON THE SURROUN DING HEADLIGHT WIRES. tHEN PULL OFF THE HEADLIGHT WIRE HARNESS BY GRABBING THE SOCKET (NOT THE WIRES). AROUND THE BULB IS A THIN SILVER HOLDING SPRING THAT LOOSENS BY SQUEEZING THE ENDS TOGETHER AND ROTATING IT. iT WILL LOOSEN AROUND THE HEADLIGHT. WHEN THIS HAPPENS THE HEADLIGHT WILL "FLOP" AROUND AND PULL IT OUT, REMEMBERING TO SEE HOW THE THREE CONNECTORS ARE LOCATED (I.E - IS ONE CONNECTOR AT 12 O CLOCK POSITION AND THE OTHER TWO ARE AT 9 AND 3 OR ARE THEY AT 3,6 AND 9, ETC.). rE-ASSEMBLY IS THE OPPOSITIE. tHE TRICK IS TO GET THE THIN SPRING WIRE BACK IN PLACE. YOU HAVE TO SQUEEZE THE SPRING AND RE-POSITION IT SO IT KEEPS THE BULB SECURLY IN PLACE

    Having just changed the bulb, I would advise taking the whole headlight assembly out first. It is near impossible to feel or imagine how to change the bulb without seeing it. First, use a phillips screwdriver to take the single screw holding the strip off just below the headlight assembly. By doing so, you will now see the other two bottom bolts holding the headlight in. Take all four bolts out then disconnect the bulb from behind. Then proceed as above.

    Jun 14, 2009 | 2006 Toyota RAV4

    2 Answers

    How do I replace headlamp bulb?


    Some imports require the entire light assembly to be removed in order to replace headlamps. Look to see if there are angled rods on the back side of the light assembly. If so, see if the can be pulled straight up towards the hood of the car. When they are released the headlight will be able to come forward. Good luck. Hope this helps.

    Apr 25, 2009 | Hyundai Motor 2004 Accent

    Not finding what you are looking for?
    2004 Toyota RAV4 Logo

    Related Topics:

    491 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    75077 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7768 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...