Question about Volkswagen Passat

Open Question

Abs fault code 01316

Bad hot starting

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 1.8 Jetta GLS. I had my mechanic install all new calipers, rotors and pads. I left my interior light on and ran the battery down. I'm getting error codes for 01316 and 18057 now


disconnect battery and join leads together ,leave for a few hours then reconnect and see what happens ,if fault persists then call mechanic and see if he can put them out for you .VW software is one of the easiest to obtain and its readly available on a copy of delphi so he will have this for sure .

Nov 08, 2017 | Cars & Trucks

1 Answer

ABS warning light comes on. Saying dics fault


It means you have one of two faults... either: 1) one or more of the wheel speed sensors is bad or 2) the ABS module is bad.
The sensors can be checked using a simple multimeter and the procedure in the Haynes manual for you car. The ABS module can be exchanged with a rebuilt one for about $120. New ones cost a small fortune. Search on-line for ABS module rebuilders, if the sensors are good. Your best bet is t go to Autozone and ask them to put a fault code reader on your car and write down the codes for us. I've been told it's a free service. Remember, if you change the ABS module, it will function just fine, but will have a instrument cluster fault until the new module is programmed into the ECM (ECU) by someone who has the factory computer link to do it for you. Most places charge from $25 to $50 to do this.

Apr 10, 2015 | Cars & Trucks

1 Answer

What does fault code 4040 mean?


I wonder if your ABS sensor on one of your wheels is bad. That will make ABS light to come on. Mine was a bad wire connection on my back wheel. on one car I had.

Sep 20, 2014 | 2001 Daewoo Lanos

2 Answers

Abs light still one says fault abs traction


Check for fault code and replace sensor with genuine item as after market units are not always compatible with the cpu. Have the cpu reset . You may need a code reading tool for this operation.

Mar 31, 2013 | Chevrolet Colorado Cars & Trucks

1 Answer

Mini abs pump motor power supply fault code 5E2D


Check and replace the ABS motor control relay.

Feb 19, 2013 | Mini Cooper Cars & Trucks

1 Answer

2001 Monte carlo tract control light is always on and so is abs light always on...brakes are good rotors are good. is there a reset button?


The ABS light has nothing to do with the condition of the brakes. The ABS is is own system that relies on the braking system in order to function. If the ABS light is on there there is a fault in the ABS system. This will also turn off the traction control since the traction control uses the ABS system.

The best start is to have the ABS system scanned for trouble codes. This will give you a clear direction in which to start finding a solution. This will need to be done with either an ABS specific scan tool or a high end multi-function scan tool. You can also try your local auto parts store to see if they can do this for you.

Once you know what the codes are than you can start figuring out what to do to fix it.

Some common failures on these are bad wheel/hub bearings, bad speed sensors, broken speed sensor wiring harnes.

Post the codes and I'll be happy to help you further.

Sep 25, 2011 | 2002 Chevrolet Monte Carlo

1 Answer

Abs light stays on I have put new brake line on new calipers because they were sticking causing brakes to get hot, thats all fixed but light still stays on.


the ABS light is on because there has been a fault detected by the ABS module. It has nothing to do with the actual braking system.

The ABS module does a self check every time you start the vehicle. If it detects a problem during that self check the ABS light will stay illuminated and a code or codes for the fault will be stored in the ABS module. Scanning the module will allow you to pull the codes and proceed with diagnosing why the fault is occurring.

The most common source of ABS problems is bad wheel speed sensors or broken wires to the wheel speed sensors. Again pulling the codes from the ABS module will narrow down the possibilities.

Once you now what codes are present post them and we will be happy to assist you further.

Apr 21, 2011 | 1998 Chevrolet S-10 Pickup

1 Answer

On my 98 plymouth voyager the abs light is on and also my driver side brakes are SMOKING HOT. Could the brake catilaber be bad?


You need to resolve all system fault codes first,
such as the ABS issue

Then work on brake hoses,calipers, etc

You will have a bearing melt down next, from
the heat

Mar 18, 2011 | 1998 Plymouth Voyager

2 Answers

Have replaced ABS module on bmw 525 E39 and ABS now ok, but the ASC lamp will not go off on the dash and fault code 23 (incorrect coding) will not clear from system? Everyone told us the ABS ecu does not...


ABS/ASC module is faulty
CLASSIC ABS FAILURE SYMPTOMS:
- Most of the time, the problem is the ABS module or one of the 4 wheel speed sensors (& sometimes the brake pressure sensor)
- In my 2002 BMW E39 DSC, three orange (warning) cluster display lights lit, ABS, Brake, & DSC
- The 3 warning lights reset when the ignition is turned off, only to repeatedly reappear within minutes of normal driving
- The fault is often intermittent leading you to falsely believe you've resolved the problem (proper diagnosis is important)
- Sometimes the fault only appears when the engine is hot; other times only at speeds over 40 mph
- Carsoft may erroneously show a rear speed sensor failure; but just replacing the speed sensor may make no difference.
- All the work is in correct diagnosis of the problem; parts replacement is trivial (from 1 to six bolts in a few minutes)
- Hence, this BMW E39 ABS 3-warning light DIY will concentrate on understanding and diagnosis of the problem

Oct 23, 2009 | 2001 BMW 5 Series

1 Answer

Abs code01316


01316 - ABS Control Module: No Signal/Communication

Jul 08, 2009 | 2003 Volkswagen Passat

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...