Question about 2006 Kia Spectra

Open Question

Need to replace a fog light - 2006 Kia Spectra

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just bought a 2009 dodge ram without fog lights i bought a bumper with fog light an switch them out but i need to know how to connect the lights to the factory switch inside what do i need to do


If your PU didn't come with factory installed fog lights then you will need to replace your headlight switch with a fog light enabled headlight switch.

Here is a link to the factory dealer-installed instructions.....

http://www.mopardodge.com/accessories/Instructions/82208102AC_IFU.pdf

You only need to get the components you don't already have. The headlight switch that is fog enabled will pull out for fog light operation, if yous doesn't you need to replace the switch and do some wiring as shown in the pdf file linked above.

Hope this helps!

Mike

Apr 18, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

Looking for fuse for fog lights on a 2008 dodge charger. we installed a fog light kit. the car is pre-wired for them. we replaced the head light switch with the one from the kit. fog lights arent...


Check your instructions with the fog lamps, I believe you will need to take your car to a dealer to have them activate the fog lamp driver in the Totally Integrated Power Module.

Jan 23, 2011 | 2008 Dodge Charger

1 Answer

How do you replace the fog light bulb on 2008 avalanche


    • 1 Open the hood and reach down into the engine bay for the fog light assembly. If you cannot reach the fog light assembly from the top you may need to get underneath the truck to reach it. Remove the electrical plug running to the fog light ballast.
    • 2 Remove the bulb. Unlock the fog light bulb by turning it counterclockwise and pulling it straight out of the assembly.
    • 3 Slide a new bulb into the fog light assembly. The part number you will need for the new bulb will be located on the ballast or base of the old bulb.
    • 4 Turn the bulb clockwise to lock it into the fog light housing.
    • 5 Reconnect the electrical connector to the bulb ballast.

Jan 23, 2011 | 2007 Chevrolet Avalanche LTZ

1 Answer

Left fog light suddenly has water inside and does not work do I need to remove and replace the whole assy or just replace the bulb


get the fog litht remove drain the water in it,replace the bulb if it did not light check the fog light fuse perhaps it might have got damage if yes change it

Dec 02, 2010 | Honda Accord Cars & Trucks

1 Answer

Fog lights on all the time


Sounds like your multifunction switch (i.e. the stalk that has the fog light switch) has burned out. This is a fairly common problem and the multifunction switch needs to be replaced.

The part (as I recall) costs < $100 (about 80, I think) and takes less than half an hour to replace.

Jun 10, 2009 | 2002 Chrysler PT Cruiser

1 Answer

How do you replace the fog lamp on a 1997 dodge neon? As best as I can tell, you have to take off the front bumper which I hope is not the case.


To replace the fog light of the passenger side you need to remove the fog light bolt and pull out the fog light assembly, then you can remove the bulb and put a new one in.

To replace the fog light on the driver side you will need to remove the front bumper cover so you can remove the vacuum box that is in the the way of the fog light bolt.

To do so you need to remove the Torx (star) screws located in the front wheel wells as well as the bolts holding the plastic by the radiator. "CAUTION: DO NOT UNBOLT THE RADIATOR."

If any of the screws are rusted into place put some penetrating oil them to help loosen them up.

PLEASE DON'T FORGET TO RATE!!!

Mar 16, 2009 | 2002 Chrysler Voyager

1 Answer

How to replace fog lights on 1998 Dodge Avenger ES


you need to take off the buttom shields and then you should be able to get to the fog lights

Jan 25, 2009 | 1998 Dodge Avenger

1 Answer

Problem with 1998 chevy malibu fog lights


hi disconnect your fog light switch if this doesn,t knock them off you need to find the fog lights relay and replace it as the fog light circuit is shorted best of luck yates210456

Oct 07, 2008 | 1998 Chevrolet Malibu

1 Answer

Replacement of Fog light for BMW 1997


Answer is on Bavarian Auto web site:
3 Series 92 to 98 Fog Light Replacement-
To install a fog light, insert a flat blade screwdriver through the front bumper grill and release the fog light retaining clip. Remove the fog light and disconnect the wiring harness. Installation is the reverse of removal.

http://www.bavauto.com/shop.asp#e36fog

Sep 01, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
2006 Kia Spectra Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...