Question about Land Rover Cars & Trucks
Land rover discovery ignition key will not turn in either door but will open gas cap and start car. land rover discovery ignition key will not lock door
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it sounds like your starter motor is faulty. first make sure the battery is fully charged, then place a screwdriver between the contacts of the solenoid on the starter motor, if it again just clicks, then you need to repair or replace the starter motor.
hope this helps
Posted on Sep 11, 2009
you will need to have the code for the number of turns to activate the drivers side door lock ,so many left and so many right .or just get it taken to the dealers .
Posted on Nov 11, 2009
You need to start by removing the inner door panel, Remove screws that hold door pull and inside release handle. There are multiple plastic clips that have to be popped out. Use screwdriver but a trim clip removal tool works better.(Lisle tools part #35400). Once panel is loose unhook elecrical connectors to panel, peel back plastic vapour barrier, access to all latch parts, rods window regulator , etc is now available.
Posted on Jan 13, 2010
Testimonial: "Awesome!!! Thank you so much. My husband's fax number is 972-438-3945 put to the attention of Severt Nielsen. "
No, likely to be caused by the actuators in the lock mechanism failing usually causing the door to remain locked. The boor door can also fail this way, as do the front side doors. Replacement requires the whole lock unit to be replaced at a cost of roughly £60 a lock, and a hours work. Helps if you have small hands. Requires a full strip down of the door and you will need the lock unit, trim clips (a few quid) and a trim removal tool (tenner). You can bodge with a flat head screwdriver, but the tool does help prevent damage to the clips & trim panel.
Posted on Feb 22, 2010
Tips for a great answer:
Dec 13, 2014 | 1999 Land Rover Discovery
Feb 11, 2011 | 1995 Land Rover Discovery
Mar 26, 2017 | 2001 Land Rover Discovery Series II
Jul 03, 2010 | 2004 Land Rover Discovery
Apr 17, 2010 | 2004 Land Rover Discovery
Mar 07, 2010 | 1996 Land Rover Discovery
Nov 11, 2009 | 2001 Land Rover Discovery Series II
Sep 25, 2009 | 2001 Land Rover Discovery Series II
Apr 12, 2009 | 1997 Land Rover Discovery
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: