Question about Cars & Trucks

Open Question

How do I remove the dashboard on my 2000 bmw. R1200c to change the abs light bulbs?

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 63 Answers

SOURCE: my car is bmw 525i 2000 model asc sensor alwayes

if you changed the asc module, the module has to be programmed/coded after replacement. If it was a new part there should be no problem programming the new control unit. I would recommend taking the vehicle to the dealership to allow them to program the control unit.If you have access to the programming don't forget to take the asc module out of "end of belt line mode" and most likely the steering angle sensor will have to be aligned

Posted on May 03, 2009

  • 20 Answers

SOURCE: ABS / ASC light comes on after a short drive

Check/replace all sensors .. ECU

Posted on Jul 07, 2009

  • 2019 Answers

SOURCE: 2000 bmw 540 dashboard temperature gauge goes to

When a gauge goes bad, you have to decide if it is the sending unit or the gauge itself. If you unplug and short the wire to the sending unit, the gauge should go to max (one way or the other), and the opposite when the wire is not connected to anything. If that works, then it is probably the sending unit. If that does not work, it is probably the gauge itself.

Posted on Feb 11, 2010

Testimonial: "that works thanks"

  • 17 Answers

SOURCE: I have 2000 Land Disc II and the dashboard lights are on


Posted on Apr 03, 2010

  • 1 Answer

SOURCE: 2000 bmw 323i auto trans wont go in reverse.

on my 2000 bmw 323i with 5 speed option car does not go into reverse

Posted on Aug 05, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1997 Volvo 850 no abs light

The abs light bulb has burned out (just like a regular light bulb). These bulbs can be replaced easily, you just remove the upper portion of the dashboard by removing the retaining screws and then you will see the gauge cluster underneath. The gauge cluster will unclip and unplug and then you can replace the bulbs which are burned out. It is very common for older cars to have dash bulbs burn out.

Feb 01, 2017 | Volvo 850 Cars & Trucks

1 Answer


When you changed out the bulbs do the lights work? Or is the indicator light on and the lights don't work. If the latter then you likely have a bad connection to the switch or a bad relay.

Jan 02, 2014 | 2006 BMW X3

1 Answer

My spedometer stopped working when the abs traction control lights came on? What is the problem?

You most likely have a short in the dashboard wiring. Have the electrical system checked by a mechanic.

Apr 30, 2012 | 2000 BMW 7 Series

1 Answer

On my 2000 corvette the abs and traction lights will not go out is there a way to dissconnet the lights so they not stay lit up all the time on the dashboard

the only true way to fix this problem is to scan it and repair the actual problem if you remove the bulbs the car will not function properly

Nov 22, 2010 | 2000 Chevrolet Corvette

1 Answer

I need to change light bulb for drive Km in


Sep 01, 2009 | 2000 Renault Sportwagon

1 Answer

Dashboard lights gone dim

I believe there are multiple bulbs in each of the units, as they blow the unit dims, change the bulbs you should be good

May 10, 2009 | 1999 BMW 318 ti

1 Answer

BMW 328I Check Engine Light Bulb replacement.

You will have to pull the dashboard display out and check to see if the bulb has blown or has been removed for some reason.

Apr 06, 2009 | 1997 BMW 328

1 Answer

How to change warning light bulbs, 97 Buick Lesabre Ltd

bulbs do burn out, but the dash will have places that are not always used for all models. i.e. if your car doesn't have ABS that light will not be used. To replace the bulbs you will need to remove the instrument cluster from the dash. its not to hard to do yourself, two phillips screwdrivers and some patience

Jan 12, 2009 | 1997 Buick LeSabre

1 Answer

Dashboard lights dont work

if it's the light for the climate control you can remove the panel again and change the bulb
i install car stereo for a living and it happened to me once
now i remove the panel in those vans without turning the key on to move the shifter so the bulbs aren't on when i yank on the dash panel
i had to get the bulb from the dealer

Jul 14, 2008 | 2000 Honda Odyssey

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides