Question about Cars & Trucks
Where is it located in the car, so I can find out what kind it is?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your dome light switch in in front of the driver's seat where the headlights are. It is possible that switch is bad as it should be both a turn knob switch, and by pulling on it, it becomes a head light switch. You may have to replace it.
Posted on Dec 31, 2008
You DO NOT need to remove the fuel tank to replace this filter.
My 1999 Signature Series Town Car did not require the special tool. It has two push out clips which hold the fuel lines in place. New clips came in the box with the filter. The clips are off-white in color and look like skinny versions of the plastic safety plugs moms use to keep toddlers from sticking objects into electrical outlets in your home.
The fuel filter is located just below the rear passenger side door - along the outside rail of the frame. It May or MAY NOT require the special tool.
BEFORE YOU BEGIN.
Be sure to depressurize the system by turning the off fuel pump - either by unplugging the cord in the left side of the trunk next to the hinge mount or removing the fuse (#14 20 amp in the fuse box under the hood).
It's a good idea to take a picture of the assembly before starting to refer to when you reassemble it.
Spread some shop towels or rags on the ground to catch any fuel which runs out of the filter when you remove it.
There is a hose clamp holding the filter in its housing - loosen with a screwdriver.
Pop out the two clips then pull the fuel lines out of the filter at each end.
Wiggle the filter out of its mounting bracket, then install the new filter and reinsert the fuel lines into it.
Be sure the clips are inserted correctly to avoid leaks. TIghten the hose clamp.
Replacement took about four minutes and required only a flat-blade screwdriver. Clips pop out and back in with only finger pressure.
Posted on Mar 24, 2009
The code is on a paper label attached to a large plastic box containing several wiring harnesses behind the driver side door panel. Posts about it being on the trunk hinge arms, behind trunk panels, on computer module, behind the fuse box, and 'you have to go to the dealer' are incorrect for this series of Town Cars. After you remove the panel (you do not need to disconnect any wires), you will see the box up near the rear view mirror. An example code (3/4) (1/2) (5/6) (9/0) (1/2). If you press the keypad buttons in this order,left to right, the door locks will operate in the manner described in your opwner's manual.
Do a search on door panel removal to learn how to remove the panel. There are some good posts on this topic - some even have pictures.
Posted on Sep 06, 2010
Tips for a great answer:
Jul 10, 2015 | 2015 GMC Savana Cargo
Mar 28, 2013 | 1997 Lincoln Town Car
Apr 12, 2017 | Cars & Trucks
Dec 30, 2012 | Cars & Trucks
Jul 23, 2012 | Cars & Trucks
Nov 05, 2011 | 1998 Lincoln Town Car
Sep 23, 2011 | 1993 Lincoln Town Car
Jul 27, 2011 | 2006 Nissan Armada
Jun 24, 2011 | 2005 Lincoln LS
Jun 18, 2011 | 2004 Chevrolet S-10
83 people viewed this question
Usually answered in minutes!