Question about 2001 Mercedes-Benz C-Class
Crankshaft position sensor
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
In the 05 E320, the cabin air filter in under the hood on the passanger side at the back wall... There is a black odd shade square cover that says "air condtioner" "battery in trunk/back"... One nut holds this cover down, then it un-hooks.. The cabin air filter is attached to the underside of this black cover.
Posted on Sep 11, 2008
Hello, The crankshaft sensor is located at the left rear of the motor, behind the left cylinder head where the transmission bolts up. I believe that it has a 6mm allen head screw holding it down.
I hope this helps.
Posted on Feb 06, 2009
Hello I'm a M.B. tech. As long as it is original there is no amplifier other than the head unit itself. The only tricky part is getting the antenna to work with the new head unit. Take a test light and find which wire is hot all the time. That will be your circuit 30 wire(radio memmory). Next turn key to position 2 and find your wire( one is for the antenna and the other is for your radio operation) and isolate those 2 wires,. Find your ground wire and those are your basic connections. There is a fader switch in your center console wood. the head unit sends its power ther and it is dispursed to the appropiate speakers(it is also a common problrm when you have no sound. Try to pop the switch up carefully with a flat blade screwdriver. If not pop up the shifter trim ring and pull up on the console wood. You may have to remove the ashtray. It is a fairly simple install hopefully my advice has been helpful.
Posted on May 29, 2009
SOURCE: 2005 mercedes benz 320 diesel
These instructions will work from 09/01/2003 and up 211 Model E Class Mercedes
1. Insert igntion key, switch to position "1"
2. press the page button (looks like a page in front of another page. Use the one with the writing on the rear page) on the steering wheel controls repeatedly until the mileage is displayed within the multifunction display.
3. Press the cluster illumination button 3 times in short succession. The battery voltage will be displayed.
4. Press the up or down arrow buttons until the service menu appears.
5. Use the + and - buttons to select the menu option "confirm"
6. Press the page button on the steering wheel until " complete service" is selected.
7. Confirm "Complete Service" with Page Button. The display will show "Service Confrimed"
Posted on May 29, 2009
Open the hood. The cover on the top engine has 2 plastic parts. Need to remove the front (small) part first. Gently lift it up and pull forward. After removing the front part , you have an access to pull up the entire other part from the front and the back. After lifting it up and taking it out, put it upside down on the floor, remove all the screw to take out the old filters and replace with new ones. There are 2 filters , one is on each side. Put all the plastic parts back in reversed order, then you are done.
Posted on Nov 09, 2009
Tips for a great answer:
Sep 28, 2016 | 2006 Mercedes-Benz E 350
Aug 05, 2014 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Dec 27, 2013 | 1989 Mercedes-Benz Mercedes Benz 500 Class
Aug 26, 2011 | 1989 Mercedes-Benz 190
Jul 21, 2009 | Mercedes-Benz ML500 Cars & Trucks
Mar 29, 2009 | 2001 Mercedes-Benz CLK-Class
Feb 20, 2009 | 1993 Mercedes-Benz Mercedes Benz 300 Class
Nov 12, 2008 | 2001 Mercedes-Benz C-Class
May 21, 2016 | 2001 Mercedes-Benz C-Class
78 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: