Question about Ford Cars & Trucks

Open Question

How do i check oil level gearbox 1998 ford courier 4x4 deisel

There is no bung to check oil level

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22219 Answers

SOURCE: what bung do I need to remove to change gear box oil

their isnt one you have to slacken the sump bolts to drain the oil.Also why are you changing the oil has it been contaminated??if its not dirty with water from a flood or something then do not touch and stop listening to part time weekend bar room know it all know nothing so called mechanics.automatic gearboxes only use the oil to work the torque converter and fill the pistons up to operate the epyicyclic gears ,whilst its working ok do not touch,and as for a haynes handbook look carefully and see if the writers are members of the institute of road transport engineers, ??? They wasnt last time i looked at one and threw it in the boot of the car after some clever ******** of a customer was trying to tell me my job with his blue anorak on and his mr inteligent glasses.Didnt do 6 yrs college to have some nerd try telling me how to fix a poxy volvo

Posted on Jan 23, 2009

Ad
  • 840 Answers

SOURCE: which bung do I remove to change gear box oil

Claire it should be in the engine compartment and it is usually a yellow dipstick and dont forget to check you must let your engine run zas you check the level

Posted on Jan 24, 2009

  • 102 Answers

SOURCE: checking gearbox oil level on 92 Suzuki Swift manual

'92 Swift - LH side of diff housing, rearwards of the LH drive shaft. Has to be filled to this plug's level.

Posted on Sep 21, 2009

  • 279 Answers

SOURCE: auto gearbox

if it has a dip stick under the bonnet you need to have the engine running with the box in neutral then dip the oil
if the engine is warm then it should read around the top mark, if the engine us cold then it should rear around the lower mark
if there is no dip stick then there is no way of checking the level and you will need to drain the box and re fill with the correct ammount through the gearbox breather on the top

Posted on Dec 10, 2009

  • 1 Answer

SOURCE: there is for my gearbox oil level. How di i check

how many liters oil go into mersedes c220 auto 2005 gear box

Posted on Jan 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I change main rear seal with motor still in ford courier 2.5 turbo diesal


96-06 courier 2.5 T diesel is a
is a external seal in a housing

drop the gearbox off
clutch flywheel off
auto TQ flex plate

if 4x4 transfer case and axles


26333397-mg3kjlkfasijfyv3e421hhu5-5-0.jpg

Oct 30, 2016 | Ford Cars & Trucks

1 Answer

2010 Peugeot 207 gearbox drain/filler/level bungs


The drain plug is situated on the final drive casing at the rear of the transmission (plug may need a square or hex drive wrench).

There is no level plug - the correct qty of oil must be measured and then poured in.
If Petrol 1.9 ltrs, diesel 2.0.

The oil is 75/80w.

Jan 19, 2014 | 2008 Peugeot 207 CC

1 Answer

Transmission fluid


First, refer to the dip stick top or the vehicle manual to identify which type of fluid to add to your transmission.
I presume you are referring to the more popular automatic transmission for many markets.


Run the vehicle until it is warm.


Remove the gearbox oil dipstick.


Jack the vehicle up a little if it helps, as you will need a drain tray and tool. Creep under the vehicle and remove the gearbox oil drain bung. It's usually at the lowest point, in the gearbox oil pan.


Drain the oil until you have almost no drips.


If you don't wish to replace the gearbox oil filter at this point, then procede to tighten the drain bung back into the oil pan/sump using a fresh washer if needed. Once tight (don't go mad as these can strip easily) you can procede to add your new oil.


You will likely need a very thin funnel to fit into the dipstick tube as this is where the oil is added on almost all Japanese models at least. If you can't find out how much oil to add to your vehicle, then add as much as you dropped out at first, or perhaps a little less as your fresh oil is cold as opposed to the expanded, warmer oil which came out.


Once added, start the vehicle, and go through the gears with your foot on the brake.
With the engine running and in Park, check the gearbox oil level.


You can often get false readings on the dipstick until all the oil you added to the dipstick tube has run into the gearbox, so you might want to check this after half an hour or so.


Run the vehicle, do a road-test, and then return and recheck for any oil leak at the drain bung and the oil level once again.


Gearboxes are very sensitive to having incorrect oil levels, so try to keep it as accurate as possible.


Good luck!

Nov 12, 2012 | 2007 Toyota Avanza 1.3

1 Answer

Noise going into 4th gear what could it be


The gearbox could be low on oil check the oil level depending on the modal there should be a bung on the side of the gearbox at the level the oil should be. If you can't detect oil below the bung you need to add oil. Cheers

Jun 19, 2012 | Cars & Trucks

1 Answer

Which way does clutch plate go in assembly? Ford Courier 11/99 turbo deisel 4x4


The tall side of the center hub faces out toward the transmission.

Apr 03, 2011 | Ford Ranger Cars & Trucks

1 Answer

WHERE IS THE FILLER PLUG ON THE GEARBOX ON A 1998 PASSAT TDI PLEASE


Hi,

Just checking.... it is a manual gearbox?

You may need a special tool for the drain plug and a 17mm allen key for the filler (some use the special drain tool for the filler as well)

The drain plug is located under the diff housing.

The filler plug is located on the left (nearside) off the gearbox (look to the left of the hole and you can see the 17mm hex filler bung).

Check you can undo the filler bung, then drain the gearbox oil.

Refit drain bung and fill gearbox through filler/level ********* until gearbox oil is up to the level of the filler bung.

Refit, test drive, check for leaks and retest level again when cold.

Cheers,

"If this has helped you in any way, please rate this solution" :-)

Jan 27, 2010 | 1998 Volkswagen Passat

3 Answers

I cant seem to find where to top up the gearbox oil on my 83 land cruiser


I dont believe thatford ********, ---get under the cruiser half way along the gear box on the left hand side you will find a bung plug 1/2way up the gearbox that is your filler and oil just dribbleing out that hole is the level.----at the back of the gearbox but attatghed to it is the transfer case this is made of aluminium,at the back of this slight y to the left about 1/2 way up is another bung that is the filler for the transfer case and also the level ,NOW LISTEN GOOD if you havea hose conecting the gearbox ******** to the transfer ******** thats good it just means the previos owner ,.or one of them had their head screwed on . W hat happens is this, strange as it seems the transfer case oil gets forced up into the gearbox,with the end result that the gearbox gets over full and the transfer gets low on oil,what we have been doing for many years is putting a bypass hose between the two fillers and as the oil gets forced up into the gear box it gravity feeds back down into the transfer case,,,so if you cant find the bungs but you have that hose you now know what it is all about, -------please let me know if that solves your problem, I know I am right but it is nice to be told

Sep 08, 2009 | 1983 Toyota Land Cruiser

3 Answers

Where is the manual transmission dipstick on 1993 mazda Mx6


manual gear boxes do not have a dipstick , there is a bung plug on the side of the box , about 1/2 way up. to check oil level,umdo that bung plug the oil level is the bottom of that hole.when at correct level oil will just drip over the lip.

Aug 16, 2009 | 1993 Mazda MX-6

1 Answer

How do u check fluid level on a manual transmission


This has to be done form under the vehicle for a rear wheel drive vehicle. I am not too certain what is the setup for a front wheel drive, but from experience, there is ususally a bung that has to be slacked, and if fluid comes out, it means the level is ok. Or u can use ur finger to c how far from the ********* the oil level is at. The level should be somewhere around there. If not add oil. this bung is commonly located at about half way up the gearbox (manual transmission)

Jan 28, 2009 | 1995 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...