Question about Pontiac Vibe
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: removing front door panel
there will be two bolt that are hidden under your arm rest they will probably be hidden little caps that just pop off most likely a star screwdriver you will need a window handle remover tool if you have power windows dont worry about it but you will also need a door panel clip remover tool or you can get by with a screwdriver covered in a cloth insert at bottem of the door an gently pry untill the door clip start to pop and release you will also need to remove a screw where you open the door from the inside hope you get it off if you break any of the door clips(happens all the time) just take broken one to the dealer or canadian tire or parts jobber hope this helps
Posted on May 28, 2008
notorious done if before, remove the door panel. BE CAREFUL WITH BEAUTY CAPS, CAN BE EASILY BROKEN (PLASTIC) when you remove the door panel go ahead and closed the driver door and activate the door lock button. you will see the bracket is either loose or it off. it looks the a coat hanger when you stretch it out. Reconnect it and lithium grease, test it and its a wrap.
Posted on Dec 26, 2008
These are bad about those Cable operated window devices .. If it is bad get on ebay and get one ordered its your best bet.. Just take a flat screwdriver and go around the bottom of the door panel and pop it loose and up the sides .. there might be a hidden screw or two in the middle around the handles.. good luck ..
Posted on Jan 25, 2009
SOURCE: Interior door panel
SHoluld be pretty simple. Look for any obvious screw covers, remove. Make sure the handle and switch covers are clear--snap off if necessary being careful not to break, then starting at the bottom, pop off the snap dowels that hold it on. After all is clear all around, lift the panel up and usually more from the back of the door panel. Good luck.
Posted on Mar 27, 2009
I have info on a 96 power door glass.....should be very simular. the triangle piece at the top front is just clipped on, the plastic piece around the opener handle is just clipped on. in the pull handle there are two screws, and the plastic piece just pops up. under the red reflector the is a screw. There is a "U" clip behind your window crank, remove this clip and the crank will pull straight out. (use a screw driver to open the gap between the crank and the door panel, to see the clip, Use a hook tool too remove the clip...you can also use a cloth or panty-hose in the gap and turn the crank, the cloth will grab the edge of the clip and pop it off)
after removing all the clips and screws the door panel is held on with plastic plugs, just pull the panel sraight out toward youself.
hope this helps.
Posted on Apr 01, 2010
Tips for a great answer:
Jun 27, 2016 | 2003 Pontiac Vibe
Apr 02, 2016 | Pontiac Cars & Trucks
Apr 12, 2015 | 2006 Pontiac Vibe
Mar 08, 2015 | 2006 Pontiac Vibe
Feb 26, 2015 | 2005 Pontiac Vibe
Apr 30, 2014 | 2010 Pontiac Vibe 1.8L
Dec 25, 2009 | 2006 Pontiac Vibe
Aug 27, 2009 | 2005 Pontiac Vibe
Dec 26, 2008 | 2004 Pontiac Vibe
239 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: