Question about 2006 Toyota Corolla

2 Answers

Shifting hard I have a 2006 corolla, check engine light came on ,and it started shifting hard,

Posted by on

  • 2 more comments 
  • Anonymous Mar 13, 2009

    I have a 2007 corolla that my engine light comes on and then the car shifts hard , when the light goes off it shifts fine can anybody help thank you.

  • Anonymous Mar 30, 2009

    I am sooooo upset by this whole thing. I had a 2005 toyota that had numerous things wrong that had to be traded for the car I have now. It sat at the dealer for 3 weeks. It was the same type of thing. They knew about the problem blah blah blah.

  • dmbandhhw Apr 06, 2009

    I have a 2005 Corolla. It's under the 96 months but I have 85000+. Can I just replace myself, or should i bring it to the dealer? I'm soon due for a ATF drain and fill in a couple months.

  • Anonymous Apr 13, 2009

    i have '06 corolla with the same thing--check engine light on, shifts hard/check engine light off, does ok. autozone put thingy on it and long story short, shift solenoid needs to be replaced. car has 127,000 mi. toyota wants $900 to fix it, when the part comes in (it's on backorder--apparently there's been an outbreak of solenoid flu and their having trouble keeping them in stock) here's a thought--toyota, step up. you had to develop a whole new part (ECM?) to bandage an existing one? i bought this car brand new and it wasn't cheap, but toyota's always had a very good reputation. keep it that way.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

You probably have a DTC code of P-2716.

Toyota knows about this issue, and a new engine Control Module (ECM) has been developed to rectify this condition. If your car is under 96 months old, and has less than 80,000 miles, the ECM will be replaced FREE by your Toyota dealer. The replacement ECM corrects the shifting issue.
Mention Tech Service Bulletin "TC015-07" when you take it in for service. If you are beyond the time and mileage as listed above, I can give you the part number for the ECU, if you want to purchase one.

Posted on Jan 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Toyota ed do you know the part number? Than

Posted on May 28, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 corolla has started to exhibit a strange revving of the rpm's and slight acceleration when i'm driving. Could this be the ecm recall or something else with the transmission


If you are using your defroster that I am sure in this weather, the computer increase the RPM to compensate for the load created by the compressor.

The symptoms for those people who haven't do the recall is hard shifting and no start condition. check engine light with codes p2716,p600, p607

Dec 19, 2010 | Toyota Corolla Cars & Trucks

Tip

2005-07Toyota Corolla Hard to Start/Harsh Shift/Check Engine Light On


There is a known issue with the 2005-2007 Corolla automatic transmission shift logic. The shift points may seem harsh, and the Check Engine light may be illuminated.

There is a technical service bulletin published that will address and rectify this condition.

The diagnostic code P2716 will be stored in the computer memory. The procedure involves replacing the Engine Control Module (the computer) with an updated unit.

The repair is covered, under the factory warranty, for 96 months, or 80,000 miles, which ever comes first.

I hope that this helps Corolla owners out.

Regards,

Toyota2_bing.gif Ed

on Dec 03, 2009 | Toyota Corolla Cars & Trucks

1 Answer

How to change the gear shift light bulb in an automatic 2006 toyota corolla??


how to change a gear shift light bulb for toyota corolla 2006 ?

Nov 28, 2010 | 2003 Toyota Corolla

1 Answer

My toyota corolla, 2007, has the check engine light on,


You need to have the car scanned for fault codes to determine the nature of the problem. Go to AutoZone or similar place to have the codes scanned.

Jul 10, 2010 | 2006 Toyota Corolla

2 Answers

P2716 pressure control solenoid d 2005 toyota corolla 117000 miles check engine light on


This is very common on Matrix/Corollas and is repairable by way of replacement PCM to correct invalid parameters. the labor is low but the part is very expensive.

Expect approximately $89 or less in labor, and $648 for the new PCM



Reference bulletin #TC015-07

The contents are below:

TRANSMISSION & CLUTCH
TC015-07 Title:
HARSH SHIFT AND M.I.L. "ON"
DTC P2716 Models:
'05 - '07 Corolla & Matrix (1ZZ-FE) September 20, 2007

Introduction
Some 2005 - 2007 model year Corolla and Matrix vehicles equipped with an automatic transaxle may exhibit a harsh shift condition and a M.l.L. ON" with DTC P2716 stored.
Improvements have been made to the Engine Control Module (ECM) (SAE term:
Powertrain Control Module/PCM) to reduce the possibility of this condition occurring.

Applicable Vehicles
^ 2005 - 2007 model year Corolla and Matrix (2WD) vehicles equipped with the 1ZZ-FE engine.
Warranty Information
Applicable Warranty*:
This repair is covered under the Toyota Federal Emissions Warranty. This warranty is in effect for 96 months or 80,000 miles, whichever occurs first, from the vehicle's in-service date.

Oct 28, 2009 | 2006 Toyota Matrix

1 Answer

Check engine light on, auto transmission shifts gears abruptly


It should still be under warrenty Take it to the shop for repairs It is a transmisson problem but many things can cause the transmisson not to shift correctly. Call your service department and ask if you should drive it in or have it towed and do not drive till you have it figured out. If you have a warrenty and continue to drive it will void your warrenty.

Sep 29, 2009 | 2006 Toyota Corolla

3 Answers

2006 Corolla: Check engine light is on - gears shift is not smooth


GOOD NEWS!!!!
You have an issue that Toyota knows about; there is a programming problem with the ECM in the vehicle, and Toyota has released a Tech Service Bulletin (TC015-07) to cure your problem.
You probably have a DTC code of P-2716...The ECM needs replaced with an updated unit.
PLUS: this repair should be covered for 96 months of use, or up to 80,000 miles. The replacement ECU will be installed totally for free. Call your local Toyota dealer & get an appointment.

Oct 13, 2008 | 2006 Toyota Corolla

Not finding what you are looking for?
2006 Toyota Corolla Logo

Related Topics:

1,501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...