- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
no, the plug wires snap onto the plugs which are in deep recesses in the valve cover on the DOHC, which is the SL2. On this old car you may just want to replace the plug wires at the same time unless you are sure they are less than 5 years old. get some good wires, not generics, that are made for the car.
my only guess is a vacuum hose leak. possibly a loose air filter housing, or the mass air flow sensor. look for any hoses unplugged. if nothing is noticed, try cleaning out your fuel system. if that doesnt solve it, then it would be something an experienced mechanic would have to come and examine it personally.
This is because you need to purchase the aftermarket-oem harness plug.This harness plugs into your original equipment radio harness and allows you to plug any aftermarket radio into the stock deck wires.After you plug the harness in you can then connect the radio wires together.Your local autoparts store or circuit city or best buy or audio express will have these radio conversion plugs.I hope I could help
On the SL2 (DOHC), there are two coolant temperature sensors located on the left-hand side of the cylinder head, near the upper coolant hose. On the SL2, the upper sensor with ONE WIRE controls the temperature gauge in the dash. The lower sensor with TWO wires provides input to the computer. They are not interchangeable. Here is a tip you will need a 14mm deep socket or box wrench. The new sensor may require a 13mm socket or wrench, depending on the manufacturer. Good luck and hope this helps. Keep me posted.
1992 Saturn SL2 Car Stereo Radio Wiring Diagram
Car Radio Constant 12V+ Wire: Orange Car Radio Ignition Switched 12V+ Wire: Yellow Car Radio Ground Wire: Black Car Stereo Illumination Wire: Gray Car Stereo Dimmer Wire: Brown Car Stereo Antenna Trigger Wire: N/A Car Stereo Amplifier Trigger Wire: N/A Front Speakers Size: 6 1/2′ Front Speakers Location: Doors Left Front Speaker Wire (+): Tan Left Front Speaker Wire (-): Gray Right Front Speaker Wire (+): Light Green Right Front Speaker Wire (-): Dark Green Rear Speakers Size: 6 1/2′ Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): Brown Left Rear Speaker Wire (-): Yellow Right Rear Speaker Wire (+): Dark Blue Right Rear Speaker Wire (-): Light Blue
you will need to unscrew your dash and pull off the front plate of your dash, then you will need to unscrew the stock radio, then you will need to go ahead and pull out the adapter from the back of your radio. Next you will need to attach your adapter harness to your car harness and splice the color coded wires to the harness on your new cd player.After that, you will need to plug your antenna back into your new cd player, Note that some cd players will require an adapter, these can be found at circuit city or at your local car dealerships.-Shocker