Question about Ford Fusion

Open Question

Test port for fuel rail on 2011 ford fusion - Fusion Ford Cars & Trucks

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1998 pontiac sunfire 2.2 litre fuel pressure check port

You disconnect the fuel supply line at the fuel rail and tee your gauge into it.

Posted on Mar 19, 2009

  • 15143 Answers

SOURCE: Failed emissions What fuse for OBD port on 2006 Ford Fusion?

check the out put from the computer to the obd ll port if good need to check the wiring harness ,connections and pin contacts from computer to obd ll port connections possible short,frayed or broken wire

Posted on Feb 14, 2010

  • 4044 Answers

SOURCE: how do i check the fuel pressure on my 2.4 engine?

There is a gauge too that you connect the fuel line to then connect to the fuel rail to test the pressure on those types of setups. It's a little harder to do when they don't add that test port but it can be done.

Posted on Jul 10, 2010

  • 50 Answers

SOURCE: 2.4L 2000 Dodge Stratus, no fuel pressure at fuel

Firstly have u filled up with fuel recently ? Take a sample of fuel make sure u havnt put petrol in by accident seen it done hundreds of time or that u havnt run out of fuel . If that's ok then it could be the fuel metering valve in the pump this will cause incorrect fuel pressures most diesels need 250 bar of fuel pressure to start a blocked fuel filter cauld also cause a non start

Posted on Oct 04, 2010

  • 33 Answers

SOURCE: 2000 dodge stratus 2.4L has no fuel pressure at

check fuses and the fuel pump relay if good have someone turn key in the on position with key off while you listen for the fuel pump to kick on if you dont hear anything pound on the tank with hand while the person turns it over. you might jar it to come on. if not check power to the fuel pump. Also make sure you have gas in it if questionable on how much put 1 gallon in just to be on the safe side. No I am not poking fun I see the simplest things kick our(technicians) behinds

Posted on Oct 05, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the fuel regulator circuit on a 2008 ford fusion

Fuel regulator circuit ? Your vehicle has a electronically controlled fuel system - electronic returnless fuel System . Doesn't have a regulator . Use's FPDM - fuel pump driver module , fuel rail pressure sensor , an the engine computer (PCM) What type problem are you having ?
Ford Electronic Returnless Fuel System Diagnosis Part 1 Ford
Ford Electronic Returnless Fuel System Diagnosis Part 2

Apr 19, 2018 | Ford Cars & Trucks

1 Answer

Trouble shooting 95 ford f150

You need to have the fuel pump pressure tested when this loss of power is present. You should at least 42 PSI and about 50 PSI under a load or when the throttle is applied quickly. The fuel pressure test port is on the fuel supply rail on the top of engine, it is a pipe that sits over the fuel injectors. The fuel press test port looks like a tire inflator valve.

Aug 15, 2016 | 1995 Ford F150 Styleside Regular Cab

1 Answer

What is the location of a fuel pressure regulator on a 2006 Ford Fusion with a 2.3 liter

I believe it is part of the fuel pump module that is located inside the fuel tank. Instead of a regulator on the fuel rail they have a fuel rail pressure sensor.... only one pressure line from the tank no return line.

Mar 07, 2016 | Ford Cars & Trucks

1 Answer

Why doesnt my fuel gauge work on my 2011 ford

check for blown fuse and if fuse is good you will have to replace the sensor whick is in the unit with the fuel pump (it is all one unit and will have to replaced as such

Sep 01, 2014 | 2011 Ford Fusion

1 Answer

How would i know if a engine has a bient valve

if it was a bent valve compression would not be the same on all cylinders. you need to go over every thing you did to make sure connections are tight and correct with electrical, vacume, and fuel.

Aug 06, 2014 | 2011 Ford Fusion 2.5

1 Answer

Windshield washer clogged on 2011 Ford Fusion Hybrid

Have you tried pole a piece of wire like off a wire brush into the hole? I know it sounds silly, but most times what clogs the outlets is wax when you wax the car.

Dec 07, 2013 | 2011 Ford Fusion Hybrid

1 Answer

Replace fuel injector

A lot like changing a plug. Depressurize system at Test port on fuel rail, unplug electric connector, and uncouple connector to fuel rail. Then twist and pull to remove with O rings.

Jun 28, 2013 | 2005 Ford Expedition

1 Answer

How do i check my fuel pressure

At the rear of the engine on top of the intake is a fuel delivery rail to the injectors, in the rail is a fuel pressure test port that looks like a tire fill valve. You need a special test gauge to tap in, you can buy one at most auto parts stores that works with most makes fuel pressure ports.

Jul 04, 2012 | 1991 Ford F150

2 Answers

Where can I test my fuel pump on my 97 ford e-150 van

there is a valve on the fuel rail that a pressure gauge will screw onto

Sep 30, 2011 | 1997 Ford Econoline

1 Answer

I am trying to check the fuel pressure on my 2004 Taurus, but I cannot locate the fuel pressure test port on the fuel rail... any suggestions?

It should be either on the rail, or by the rail on one of the fuel lines. Hope this helps, James Booth

May 17, 2011 | 2004 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

80263 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides