HAS A CRACKING SOUND WHEN LISTENING TO MUSIC
SOURCE: rear end rattle on my
I found that the rear sway bar bushings go bad and start making noise and they are not that expensive, it's the bushings that hold the bar to the frame
SOURCE: Toyota Avalon Rear View Mirror
Hi-,
I had the same problem - the inside rear view mirror fell off during a hot summer day. I bought the mirror glue (adhesive) and wondered how to I separate the metal button from the mirror. Enventally, I tried the following and successully separated the metal button from the mirror: There is a little squre slot on the plastic sheath of the metal button. Please find a small flat-ned screw driver whose tip can fit into the sqare hole. put the screw driver into the hole and put it all the way inside down - which will open a little bended metal piece that stops the buttom; at the mean time, slide the metal button towards outside. As the bended metal piece opened uder the pressure of the screw driver, the metal button is freely moveable and can be slide out.
I did this successfully for my Toyota Avalon 1998 car.
Hope it helps.
Wei
843 views
Usually answered in minutes!
this is the link to my garage I am on facebookhttps://www.facebook.com/TedsRepairs
Ted, I'm confused, brake light is the one inside the car behind above the rear seat
×