Question about Hyundai Santa Fe

Open Question

Santa fe will not connect with scan tool - Santa Fe Hyundai Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 566 Answers

SOURCE: does it take a special tool to replace rear brake pads on 2002 hy

hi from uk the rear brake calipers pistons have to be rotated and pushed backwards into the calipers fully so as to enable new pads to be fitted there is special tool for this to make job easy and if you check E BAY garage/tools and equipment pages there are numerous types and different prices dependant on makers ? however you can improvise/make a tool using a a 1/2 inch square drive socket and t/bar +short extension look at piton and you will see it has slots ? cut away an old socket to provide teeth to fit these slots ? then you can both push and rotate c/wise the piston back into caliper or you can buy the tool ? from motor supermarket if you have time ? hope this helps

Posted on Mar 22, 2009

Ad
jmgldsmth
  • 1889 Answers

SOURCE: 2007 Hyundai Santa Fe Headlight

you need a torx screwdriver

Posted on May 29, 2009

messstat
  • 365 Answers

SOURCE: Wondering about special tools involved to raplace

No "special" tool that I'm aware of...you've posted related question about this task...I do NOT recommend doing this at home...A mechanic shouldn't charge all that much, say $150 max to do this job and then it'll be done right the first time...If you "accidentally" knock the engine out-of-time you could cause engine damage $$$$

Posted on Jun 23, 2009

SOURCE: I'm just wondering if there are any tools special

dear friend-you do not need any special tools,but if it is a V6 you will need some extra hands.

Posted on Jul 22, 2009

ghost45
  • 1280 Answers

SOURCE: hyundai santa fe 2004 how can i install two front seat,

2 bolts in each of the seats' floor rails... total of 8. Wire harness connectors may not be the same power seat control harness, seat heaters, etc. Research of connectors shows floor harness connectors are identical between 04 & 05. However, optional features like seat warmers in the wire harness of the 05 model may not exist in the other and vise versa.

Posted on Sep 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 04 santa fe will not compute with scan tool


I've had that problem on other cars if the cigarette lighter fuse is blown, you may check that.

Dec 07, 2015 | 2004 Hyundai Santa Fe

1 Answer

My 2001 Hyundai Santa Fe 2.4L runs with OBDII scan tool plugged in only. If I disconnect it, the engine shakes very bad and PO11


Hi Rolando, Code P011 refers to the camshaft timing-Cam timing is above a set limit, Probably over advanced, This code can be caused by, Incorrect Camshaft Timing*Wiring Problem(Harness/Wiring)in the Intake timing control solenoid* Continous Oil flow to VCT ( Variable Cam Timing) Piston Chamber.* Failed Timing Valve Control Valve (stuck open).......This is a Mechanical Failure of the VCT or related parts. If you are not familar with Variable Valve Timing or the use of a scan tool, I strongly advise you to seek help from a Qualified Auto Repair with ASE technicians to help with this problem. I hope this helps Good Luck, Randy.

Mar 03, 2015 | 2001 Hyundai Santa Fe

1 Answer

How do I change the negative battery cable in a 2002 sante fe


They sell a variety of replacement clamps or terminals, unbolt it,cut it off, expose a 1/2" or so wire and connect it to the replacement terminal, and install back to battery. Like 5 bucks and a couple tools.

Jun 29, 2013 | 2002 Hyundai Santa Fe

1 Answer

Where is the diagnostic tool connection on 2002 hyundai santa fe?


most connections for the scanning tool. are under dash on drivers side, under steering wheel. good-day !

Nov 06, 2011 | 2002 Hyundai Santa Fe

1 Answer

How do I reprogram the key fob on my 2005 Hyundai Santa Fe without having to pay the fee at the dealership?


Well, you basically have only 3 choices:
1. Pay the fee at the dealership
2. Purchase the high-dollar equipment that is required to perform the programming procedure
3. Forget about adding another key fob to tor vehicle.

TECHNICAL SERVICE BULLETIN

Group
90 - ELECTRICAL

Number
03-90-020

Date
October, 2003

Model
Elantra 2001-2004, Santa Fe 2001-2004, Sonata 2002-2004, Tiburon 2003-2004, XG(NNN) NNN-NNNNand XG(NNN) NNN-NNNN2004

Subject
SECURITY SYSTEM KEYLESS ADAPTER CABLE

This bulletin supersedes TSB # XXXXX
DESCRIPTION:
The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03 or newer) and Data Link Connector (DLC) Cable.
SERVICE INFORMATION:
The keyless adapter cable can be used on the following vehicles:
^ 2001 -2004 Elantra
^ 2001-2004 SantaFe
^ 2002 - 2004 Sonata


Apr 24, 2011 | 2005 Hyundai Santa Fe

1 Answer

Check engine problem


plug it into a scan tools .it could be a camshaft sensor or crank sensor ,,scan tool can deside this

May 11, 2010 | 2004 Hyundai Santa Fe

1 Answer

2002 hyundai santa fe awd feels like transmission is slipping when stopping engine seems to jump


dear friend-i do not think you have a problem with your transmission,but i think we must have a look at the tps sensor.another thing to do is to connect to a hi scan and get some fault codes.

Jul 08, 2009 | 2002 Hyundai Santa Fe

1 Answer

Program key for 02 santa fe


if you are talking about the fob it has to be programmed with hyundai scan tool

Feb 08, 2009 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...