Question about 1989 Mazda 626

1 Answer

When i put it in to gear it keeps jumpin out!

About two weeks ago i was driving and out of no where i went to change gears and i put it into third and it came out, but get this the shifter was still in third but it wouldn't move anywhere. now every couple of day i'll get in it and start it up and put it into first gear and it'll go but after i drive it around the yard it comes back out! i dont know.....

Posted by on

  • meghan417 May 11, 2010

    I am going to assume this is a standard, if so i had a similar problem with my car. My gears were chiped, so sometimes it poped out of gear. It would do it in reverse, i put it in, back up and halfway through me backing up it poped out and made a grinding noise. I had to get a new transmission and it was all set after that.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 112 Answers

It needs some work to be done in gearbox, worn selector detent ball or weak spring.

Posted on Jan 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have Honda Odyssey 2000 v.6 3.0lt, recently the transmission plays up, it doesn't shift gear, but engaged in third gear all the time and D green light keeps flashing. I don't know why it


Possibly the Throttle position sensor (TPS) This controls a number of things one of wich is when the transmition changes gear. I recomend you have the vehicle scaned though & that should give you an answer.

Jun 21, 2012 | Honda Odyssey Cars & Trucks

1 Answer

Kicks outta 1st and 3rd


well its either the clutch or the tranni

Feb 24, 2012 | 1986 Toyota 4Runner

1 Answer

About 5 years ago my 95 buick skylark transmission went into safe mode for some reason. it still had park, reverse, neutral, but when put it into drive it would go into 3rd gear and stay there. It was...


Some issues with the engine or trans, can cause a third gear start (limp home mode) Dont get to happy it did not fix its self for good someone with a code reader might be able to steer you in the right direction ( A lot of codes get stored in the computer that never turn on the check ending lite ) Good Luck

Aug 26, 2010 | 1995 Buick Skylark

3 Answers

Problems with switching gear on a VW Jetta 1998 manual


It sounds like the slave cylinder for the clutch needs to be bled out first (it uses brake fluid) then if this does not help replace the clutch slave cylinder unit before transmission damage ensues. You must bleed out any air in the system after replaceing similar to how brakes are bled in acar with an assistants help.

Aug 02, 2009 | 1998 Volkswagen Jetta

1 Answer

Problems with switching gear on a VW Jetta 1998 manual.


sounds like the cables have rusted up a bit with the weather,try oiling then with a proper oil can and not that wd40 fish oil stuff .

Aug 02, 2009 | 2008 Dodge Avenger

1 Answer

Will not shift to 2 gear


If you keep accelerating will it catch third or does it stay in 1st? Does it **** hard when you put it in gear?

Mar 14, 2009 | 1984 Chevrolet K2500

1 Answer

Clutch pedal goes to the floor(new clutch installed 2 wks ago)


that cable fited one side to cluch pedel and ather side fited gear box side where palte which is relecing clutch bearing. dont forget to adjust.

Dec 01, 2008 | 1985 Volkswagen Quantum

1 Answer

Gear shifting is hard to impossible


Synchronize the gears is what a trans does when you shift it, the part that makes this possiable is a part called a sycronizer ring, if they (4 of them) wear out prematurely then you end up with a hard shift issue, does this answer your question? I do assume your clutch is ok?

Nov 01, 2008 | 2006 Saturn Vue

1 Answer

2001 Passat -


I have the same make and model. Overall a really nice car. I was driving down the freeway yesterday when the car jolted and I lost the gear lighting on my dash. The car drove in 'limp' mode the remainder of the way home. I started it up this morning and it ran fine for about 15 minutes then it went back to 'limp' mode and the dashboard gear indicatior lights went out again. Research indicates this is the Transmission control module which is located under the passanger side floorboard. In my case there is moisture in this area

Sep 15, 2008 | 2001 Volkswagen Passat

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...