Question about 2000 Buick Regal

Open Question

Dash light for odometer is out - 2000 Buick Regal

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 dodge ram 1500 2 wheel drive all dash lights not working interior fuses checked all ok odometer light works


most dash lights can be dimmed or switched off check this first, then trace the wiring from the switch to the dash lights for a bad connection.

Oct 03, 2016 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

Is there a fuse that controls odometer park reverse my odometer doesn't light up


The odometer light is incorporated with the dash light circuit. If all other dash lights are operational, suspect a burned out bulb

Jan 05, 2016 | Cars & Trucks

1 Answer

My electric odometer went out on my 02 ford explorer but all other lights work on my dash. How do i fix it?


You said the odometer went out, but does the speed odometer still work? How about the trip odometers? It could be the sensor went bad. Or it could be a connection to the dash. Has the dash been apart recently?

Oct 03, 2013 | 2002 Ford Explorer

2 Answers

Lights or fuse for my speed odemeter guage and heater/air conditioning system


These lights for the dash are controlled by a rheostat instrument control dimmer switch next to the main light switch for the headlights, it is either turned off (have seen this dozens of times) or it is defective. Below is a picture of the switch assembly I speak of. The thumb wheel next to the knob is the dimmer control.



2_13_2012_9_00_33_pm.jpg

Feb 13, 2012 | 2000 GMC Yukon XL

1 Answer

2006 toyota corolla maint. required light stays on. How do I make it go out after maint.


turn the key on. press the odometer/trip button until the odometer is displayed. turn the key off. press and hold the odometer button and turn the key to the run position (do not start). The odometer should change from a number to all dashes ( - - - - - - ). One by one the dashes will disappear then the display will change to all zeros and then will change to the regular odometer reading. Once the regular odometer is displayed let go of the button and turn the key off. The maintenance light will now be reset.

Jun 10, 2011 | Toyota Corolla Cars & Trucks

2 Answers

I has toyota Tacoma 2006 4x4 , the problem my truck is the light maint req shown up , in the manual book say oil change , i did but that light still there , Can you give me the tip for that , i 'm...


1) Turn your key to the on position (dash lights will come on)
2) Push the odometer button until the total miles are displayed and keep holding it.
3) Turn the key Off, and then back ON while holding the odometer button in.Don't let up on the button. You will notice the odometer reading shows dashes and they will sequence off. After they sequence off, the Maint Reqd light will go off. Release the odometer button

Mar 05, 2011 | 2006 Toyota Tacoma

2 Answers

Odometer code "ill.5"


ILL.1" through "ILL.6" displayed in the odometer field indicate the level of the dash light dimmer setting. These messages will be displayed briefly when the dash light dimmer setting is adjusted. In the '05 Subaru Outbacks, dash light dimmers are known to fail. When they fail, the "ILL.n" message will appear sporadically in the odometer display without changing the dimmer setting. Replacing the dimmer will correct the problem.


Hope this helps

Nov 28, 2010 | 2005 Subaru Outback

1 Answer

I need to reset the maintenance required light on my 2005 toyota camry le


To reset the light, insert the key and turn to "ACC". Hold down the odometer button while turning the key to the "ON" position. Continue to hold the button and watch the odometer. Dashes in the odometer window will count down until there are no more dashes in the odometer window.

Oct 15, 2009 | 2004 Toyota Camry

2 Answers

Maintenance Required Light


The instruction is in your owners manual. I also perform my own maintenance. Well, here's the steps if you still haven't done it. Good Luck

Put the key into the ignition and press the odometer button. While holding down the odometer button, turn the key to the on position. You will see "-----"on the odometer display. It will count down "-----" "----" "---" "- -" "-". Then you will see zeros on the odometer display "000000". You can now release the odometer button. This will reset the maintenance light on your dash.

Dec 30, 2008 | 2006 Toyota Tundra

Not finding what you are looking for?
2000 Buick Regal Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...