Question about Nissan Primera

Open Question

How to remove dashboard of nissan primera

How to remove dashboard

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Buschchris1
  • 474 Answers

SOURCE: sideskirts

Most likely. If the bodys the same it should. usually the differences are minimal, you may have to do some custome fitting but nothing too hard.

Just plan and use good judgement.

Posted on Jun 17, 2008

  • 25 Answers

SOURCE: primera 1996

probably has a faulty door switch...

Posted on Aug 26, 2008

  • 1 Answer

SOURCE: nissan primera gearbox

how much is the price for nissan primera 2003 gear box

Posted on Jan 14, 2009

johnf1aresti
  • 1098 Answers

SOURCE: my nissan primera key fob will not unlock the doors or start the engine

check whether your key fob has not lost the program or you have the right key.

Posted on Aug 17, 2012

johnjohn2
  • 5763 Answers

SOURCE: cannot remove wiring from back of P11 primera radio

Take a good look at the connectors, there is a tab in the middle of the connector that must be push down and held while you wiggle and pull connector out. sometimes it is hard to see or get to but it is there,

Posted on Sep 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dashboard removal for 1999 mazda 626


Several dashboard bulbs are blown. Need them changed, so I 'm thinking the dashboard has to be removed. Am I right?

Feb 17, 2013 | 1999 Mazda 626

Tip

How to remove dashboard trim in Skoda Yeti interior


Thanks to this tutorial you can see how to remove dashboard trim in ?koda Yeti.
First you have to pry the black plastic around sound system and HVAC, next the dashboard trim starting from the glovebox side.

on Feb 04, 2015 | Skoda Yeti Cars & Trucks

1 Answer

Need a digram of taking a dashboard out of a 2005 impala


  • Turn the engine of the Impala off and open its hood. Use a socket wrench to remove the negative cable from the battery.
  • Remove the four screws securing the driver's side kick panel, using a Phillips screwdriver. Use a slotted screwdriver to pry out the kick panel. Remove the passenger's side kick panel the same way.

  • Remove the metal plate from the driver's side of the vehicle under the Steering wheel by detaching its two securing bolts with a socket wrench. Pull the plate off to reveal three electrical connections. Unplug the three connections.
Glove Compartment
  • 4 Open the glove compartment and empty its contents.
  • 5 Remove the two screws at the back of the glove compartment.
  • 6 Pull the glove compartment off of the dashboard.
Center Dash Panel
  • 7 Remove the two screws securing the radio and the two screws securing the A/C unit with a Phillips screwdriver.
  • 8 Remove the four corner screws of the center dash panel faceplate with a Phillips screwdriver. Pull the faceplate off.
  • 9 Use a slotted screwdriver to pull the radio and A/C unit toward you.
  • 10 Reach behind the two devices and disconnect their connections. Pull them out of the vehicle.
Dashboard
  • 11 Remove the two screws underneath the steering wheel, using a Phillips screwdriver.
  • 12 Remove the two screws on the lower right side of the dashboard, using a Phillips screwdriver.
  • 13 Remove the 10 mm bolt from both side panels with a socket wrench.
  • 14 Remove the defroster grille by pulling it out. Remove the four screws along the top of the dash near the windshield.
  • 15 Pull the dashboard off the Impala and detach the two electrical connections. Lift up the dashboard and remove it from the vehicle.

Sep 22, 2012 | 2000 Buick LeSabre

1 Answer

My left side of the dashboard light went out. How do I fix it


you need to find proper bulb type to replace burned one. in general you need t10 or t5 type bulbs.

before removing dashboard, you need to remove battery cable from (-) terminal.
removal of dashboards differ from car model to car model. basically there are upper screws and you need to remove dash board bezel/trims first.if you remove bezel and screws, there will be several screws holding dash board in its place. try no to drop screws when removing them. and be gentle while moving the dashboard. there are two or three sockets at back. you may need to remove them by releasing their clips. and you will see bulb holders holding bulbs in dashboard in general 4 or 5 bulbs are used to illuminate gauges. remove them by turning covers and put new bulbs in it. intallation is the reverse order. do not forget to clip sockets back.

Nov 20, 2011 | Cars & Trucks

1 Answer

How do I remove dashboard to get to instrument panel to replace bulbs?


You will need a cross point screw driver

  • 1 Remove the two screws on the underside of the top of the trim panel surrounding the dash and instrument panel.
  • 2 Pull the trim piece off the dash.
  • 3 Remove the four screws that hold the instrument panel in the dashboard using a cross point screwdriver.
  • 4 Slide the dashboard instrument panel forward and disconnect the electrical connector from the back of the dashboard.
  • 5 Turn the instrument panel over.
  • 6 Turn the base of the dashboard light bulb counterclockwise to unlock it from the instrument panel and pull it out of the panel to remove it.
  • 7 Insert a new light bulb into the back of the panel, and turn the bulb clockwise to lock it into the panel.
  • 8 Plug the electrical connector back into the instrument panel and slide the panel back into the dashboard.
  • 9 Secure the panel with the factory mounting screws and replace the trim and trim-mounting screws using a screwdriver.
  • Nov 23, 2010 | 1999 Toyota Sienna

    1 Answer

    Remove dashboard from honda accord S/W


    I don't think removing the dashboard will help much. All the 1995 Accords I've worked on the ECM is under the right front carpet. Take a look and see if your is the same.

    Disconnect negative battery terminal. Remove right door sill molding. Pull carpet back to access ECM. Remove ECM cover screws. Unplug ECM connectors. Remove mounting screws. Remove ECM.

    Mar 17, 2010 | 1995 Honda Accord

    1 Answer

    How do I remove the dashboard on my 1994 Mercury Sable?


    remove tha fan speed knob by pulling it out and unscrew the screws beneath it to open the dashboard

    Dec 03, 2009 | 2001 Mercury Sable

    1 Answer

    Remove a 93 Golf 3 VR6 Dashboard


    1. 5b63f60.jpge173e8a.jpg
    2. On Cabriolet with an air bag, disconnect the negative battery cable and wait at least 20 minutes for the back-up power supply to discharge. Make sure no one is in the vehicle when connecting the battery. Unintended deployment of the air bag can cause serious or fatal injury.
    3. Disconnect the negative battery cable.
    4. Remove the gear shift knob and boot and remove the center console.
    5. Remove the steering wheel.
    6. Remove the knee bar from below the dashboard.
    7. Remove the steering column support bracket and lower the column.
    8. Pull the knobs off the heater controls and remove the control assembly and the radio.
    9. Remove the headlight switch and switch blanks to gain access to the screws. Remove the instrument cluster and trim panel around the cluster.
    10. Remove the glove compartment.
    11. At the firewall, remove the plastic tray and remove the 2 nuts holding the top of the dashboard.
    12. .Remove the main fuse panel and disconnect the plugs at the back. Disconnect the ground wires.
    13. Disconnect any remaining wiring from the dashboard and remove the 4 last screws; 1 at each end and 1 at each end of the instrument cluster area. Remove the dashboard.
    To install:
    1. Fit the dashboard into place and start all 4 screws, then tighten them.
    2. Install the fuse panel and connect the wiring.
    3. Secure the steering column into place.
    4. Install the switches and instrument cluster.
    5. Install the heater controls and radio.
    6. Install the console and connect all wiring.
    7. Connect the battery to test the electrical system.
    8. Install the steering wheel, knee bar and all remaining components.
    Good luck...

    Sep 26, 2008 | Volkswagen Jetta Cars & Trucks

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    180 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    75744 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    713 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...